Rh(III)-Catalyzed One-Step Synthesis of ortho-Alkynylated Perylene Imide Dyes: Optical and Electrochemical Properties of New Derivatives

A one-step Rh-catalyzed site-selective ortho-C−H alkynylation of perylene as well as naphthalene mono- and diimides is reported. A single step regioselective access to ortho-C−H alkynylated derivatives of these ryleneimides not only increases the step economy of the ortho-functionalization on these dyes but also provides a quick access route towards highly functionalized dyes that have potential optoelectronic applications. Increased solubility of tetra(triisopropylsilyl)acetylenyl PDIs in organic solvents greatly enhances their utility for further derivatization.     

Mo掺杂NiMnSe2的制备及其超级电容器性能

成分和结构是影响多元过渡金属硒化物电化学活性的关键因素。适当掺杂其他金属元素可以有效提高电极材料的电化学性能。通过简单的一步水热法,在泡沫镍上制备出了一种无黏结剂的Mo掺杂NiMnSe₂(记作Ni_0.8Mo_0.2MnSe₂)。Mo的少量掺杂为电极材料提供了丰富的反应活性位点,大大提高了NiMnSe₂的电化学性能。在1 A·g^-1时,Ni_0.8Mo_0.2MnSe₂的比容量达到1 404.0 F·g^-1。掺杂Mo显著降低了NiMnSe₂的电荷转移电阻和扩散电阻。组装的混合超级电容器Ni_0.8Mo_0.2MnSe₂//AC (活性炭)比容量达到81.6 F·g^-1,且倍率性能优异。在2 A·g^-1下连续充放电10 000周,容量保持率为95.8%,表现出超高的循环稳定性。混合超级电容器Ni_0.8Mo_0.2MnSe₂//AC在376.6 W·kg^-1的功率密度下,能量密度达25.5 Wh·kg^-1,高于NiMnSe₂//AC (17.3 Wh·kg^-1)。     

Front Cover: Enhancement of dielectrophoresis-based particle collection from high conducting fluids due to partial electrode insulation

Dielectrophoresis (DEP) is a successful method to recover nanoparticles from different types of fluid. The DEP force acting on these particles is created by an electrode microarray that produces a nonuniform electric field. To apply DEP to a highly conducting biological fluid, a protective hydrogel coating over the metal electrodes is required to create a barrier between the electrode and the fluid. This protects the electrodes, reduces the electrolysis of water, and allows the electric field to penetrate into the fluid sample. We observed that the protective hydrogel layer can separate from the electrode and form a closed domed structure and that collection of 100 nm polystyrene beads increased when this occurred. To better understand this collection increase, we used COMSOL Multiphysics software to model the electric field in the presence of the dome filled with different materials ranging from low-conducting gas to high conducting phosphate-buffered saline fluids. The results suggest that as the electrical conductivity of the material inside the dome is reduced, the whole dome acts as an insulator which increases electric field intensity at the electrode edge. This increased intensity widens the high-intensity electric field factor zone resulting in increased collection. This informs how dome formation results in increased particle collection and provides insight into how the electric field can be intensified to the increase collection of particles. These results have important applications for increasing the recovery of biologically-derived nanoparticles from undiluted physiological fluids that have high conductance, including the collection of cancer-derived extracellular vesicles from plasma for liquid biopsy applications.     

Comonotone approximation with interpolation at the ends on an interval

Let a function f ∈ C[-1, 1], changes its monotonisity at the finite collection Y := {y1,… ,ys} of s points yi ∈ (-1, 1). For each n ≥ N(Y), we construct an algebraic polynomial Pn, of degree ≤ n, which is comonotone with f, that is changes its monotonisity at the same points yi as f, and |f(x)-Pn(x)|≤c(s)ω2(f,(√1-x2)/n), x∈[-1,1],where N(Y) is a constant depending only on Y, c(s) is a constant depending only on s and ω2 (f, t) is the second modulus of smoothness of f.     

基于微机械陀螺的MIMU关键技术

针对基于微机械陀螺的MIMU关键技术，对其进行研究和解决。参加美国JDAM性能指标和导航精度要求，计算陀螺性能参数：采用多级大容量的滤波器及有源电流限制电路，同时电源的输入端接入EMC滤波器，以提高电磁兼容性，并能抵抗浪涌和拉偏的能力；DSP实现信号实时采集，采用高次多项式拟合预处理去除数据野值；根据GJB729评估方法，利用利用蒙特卡罗方法仿真进行精度评估；最后按照GJB813进行可靠性分析。     

山区智能视觉火情高空图像搜集系统的设计与实现

介绍了一种针对山区多样性突发火情事件中基于智能视觉的高空图像搜集系统,采用以ST意法半导体公司的STM32F107VCT6为处理核心的开发平台,地面控制平台通过高空无人机的高速照相机对目标区域火情图像数据进行搜集,并将图像数据带回到地面控制平台的PC处理器上进行综合分析。地面控制平台根据智能视觉信息采集模块采集的山区遥感图像的均值作为初始背景,并对背景图像进行实时更新,利用光谱特征与距离算法获取差分图像,并进行图像处理,从而获取山区发生火情区域的图像分析数据,以实现对山区森林突发火情事件的及时监测,在火情发生初始阶段就能扑灭。本文对山区智能视觉火情高空搜集系统的实现原理、核心硬件设计、系统软件设计等分别进行了研究,并通过系统实验进行了验证,测试结果表明,该系统在对山区的高空图像搜集实验中,对不同颜色物体的分别识别率为100%,对火灾与地形地貌的识别率为95.55%和81.12%,非常适用于各种山区环境下的智能视觉监控系统。     

统计数据采样算法

将集中式控制系统常用的结构二层结构改进为智能化的三层结构的设计方案,即传感器、智能巡检仪和上位机。上位机既可以直接读取传感器的数据也可读取智能巡检仪的数据。此方案较好地解决了二层结构所出现的问题,并且也适合交大规模的其它类型的控制系统。这种设计方案存在当规模时上位机采集数据出现丢失现象。本文提出了利用数据库的历史数据及控制曲线的线性特征的数据采集算法,较好地解决了数据丢失的问题。并以温控系统为例仿真了在较大规模控制环境下的试验结果。     

In situ X‐ray data collection and structure phasing of protein crystals at Structural Biology Center 19‐ID

A prototype of a 96‐well plate scanner for in situ data collection has been developed at the Structural Biology Center (SBC) beamline 19‐ID, located at the Advanced Photon Source, USA. The applicability of this instrument for protein crystal diffraction screening and data collection at ambient temperature has been demonstrated. Several different protein crystals, including selenium‐labeled, were used for data collection and successful SAD phasing. Without the common procedure of crystal handling and subsequent cryo‐cooling for data collection at T = 100 K, crystals in a crystallization buffer show remarkably low mosaicity (<0.1°) until deterioration by radiation damage occurs. Data presented here show that cryo‐cooling can cause some unexpected structural changes. Based on the results of this study, the integration of the plate scanner into the 19‐ID end‐station with automated controls is being prepared. With improvement of hardware and software, in situ data collection will become available for the SBC user program including remote access.     

Non-Aqueous Capillary Electrophoresis for Separation and Simultaneous Determination of Magnoflorine,Taspine, and Caulophine in Caulophyllum robustum Collected in Different Seasons

A non-aqueous capillary electrophoresis (NACE) method has been developed for the simultaneous determination of magnoflorine, taspine, and caulophine in Caulophyllum robustum collected in different seasons. The relative standard deviations (RSDs) of the migration times and peak areas of the three components were 0.33 and 3.34% for magnoflorine, 0.45 and 2.67% for taspine, and 0.49 and 3.71% for caulophine, respectively. Detection limits of magnoflorine, taspine, and caulophine were 0.30 μg/mL, 0.08 μg/mL, and 0.10 μg/mL, respectively. This method has been successfully applied to simultaneous determination of the three bioactive components in the different collection seasons.