Tailoring Morphology of PVDF-HFP Membrane via One-step Reactive Vapor Induced Phase Separation for Efficient Oil-Water Separation

Poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP) receives increasing attention in membrane separation field based on its advantages such as high mechanical strength, thermal and chemical stability. However, controlling the microporous structure is still challenging.In this work, we attempted to tailor the morphology of PVDF-HFP membrane via a one-step reactive vapor induced phase separation method.Namely, PVDF-HFP was dissolved in a volatile solvent and then was cast in an ammonia water vapor atmosphere. After complete evaporation of solvent, membranes with adjustable porous structure were prepared, and the microstructures of the membranes were analyzed by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and X-ray diffraction characterizations. Based on the results, a mechanism of dehydrofluorination induced cross-linking of PVDF-HFP has been suggested to understand the morphology tailoring.To our knowledge, this is the first report of one-step reactive vapor induced phase separation strategy to tailor morphology of PVDF-HFP membrane. In addition, the membranes prepared in the ammonia water vapor exhibited enhanced mechanical strength and achieved satisfactory separation efficiency for water-in-oil emulsions, suggesting promising potential.     

The covalent functionalization of few-layered MoTe2 thin films with iodonium salts

Covalent functionalization of 2D materials provides a tailored approach towards tuning of their chemical, optical, and electronic properties making the search for new ways to graft small molecules important. Herein, the reaction with (3,5-bis(trifluoromethyl)phenyl)iodonium salt is revealed as an effective strategy for functionalization of MoTe₂ thin films. Upon decomposition of the salt, the generated radicals graft covalently as aryl-(CF₃)₂ groups at the surface of both metallic (1T’) and semiconducting (2H) polymorphs of MoTe₂. Remarkably, the reactivity of the salt is governed by the electronic structure of the given polymorph. While the functionalization of the metallic MoTe₂ occurs spontaneously, the semiconducting MoTe₂ requires activation by light. The reaction proceeds with the elimination of oxide from the original films yielding the functionalized products that remain protected in ambient conditions, presenting a viable solution to the ageing of MoTe₂ in air.     

Sonoluminescence intensity and ultrasonic cavitation temperature in organic solvents: Effects of generated radicals

Ultrasonic cavitation in organic solvents remains poorly understood in contrast with aqueous systems, largely because of complexities related to solvent decomposition. In this study, we sonicated different types of organic solvents (i.e. linear alkanes, aliphatic alcohols, aromatic alcohols, and acetate esters) under argon saturation. The average temperature of the cavitation bubbles was estimated using the methyl radical recombination method. We also discuss the effects of the physical properties of the solvents, such as vapor pressure and viscosity, on the cavitation temperature. The average cavitation bubble temperature and sonoluminescence intensity were higher in organic solvents with lower vapor pressure; for aromatic alcohols, these values were particularly high. It was found that the specific high sonoluminescence intensities and average cavitation temperatures exhibited in aromatic alcohols are caused by the highly resonance-stable generated radicals. The results obtained in this study are very useful for acceleration of sonochemical reaction in organic solvents, which are indispensable for organic synthesis and material synthesis.     

Modeling of dynamics, heat transfer, and combustion in two-phase turbulent flows: 2. Flows with heat transfer and combustion

The objective of this part of the paper is to summarize the information concerning the authors' works in the field of simulation of two-phase gas-particle turbulent flows with heat transfer and combustion. A kinetic equation had been derived for the probability density function (PDF) of the particle velocity, temperature, and mass distributions in turbulent flows. This PDF equation is used for the construction of the governing conservation equations of mass, momentum, and heat transfer in the dispersed particle phase.The numerical scheme incorporates two-phase fluid dynamics, convective and radiative heat transfer, and combustion. The proposed models have been applied to the calculation of various particle-laden turbulent flows in jets, combustion and gasification chambers, and furnaces.     

逆向环形分布射流迴流特性的数值计算

数值计算表明,逆向多环形分布射流可造成颗粒能直接进入,并能进行强烈的动量、能量交換的理想的迴流区结构。多环形结构可在大范围內造成所需尺寸的迴流区。逆向射流和主流速度比、环直径、射流直径和孔数、环的结构形式及离燃烧室进口的距离是影响迴流特性的主要参数。     

Die Herstellung von Aluminiumnitrid

Zur Erzeugung von Kohlenstoff-14 in Kernreaktoren nach der Gleichung N-14 (n, p) C-14 wird auf Grund vieler physikalischer Parameter, wie hohe Temperaturbeständigkeit, holier Stickstoffgehalt (bezogen auf die Masseeinheit) und geringerer Einfangsquerschnitt für Neutronen der metallischen Komponente sowie relativ leichte Abtrennung des gebildeten Kohlenstoffs Aluminiumnitrid eingesetzt. Die Amvendung des Aluminiumnitrids fur die angeführte Kernreaktion erfordert den Einsatz von reinsten Materialien, besonders den Ausschluß von Kohlenstoff und dessen Verbindungen. Aus diesem Grunde ist es nicht möglich, das in der Technik angewandte Verfahren, die Herstellung aus Bauxit, anzuwenden.     

基于耦合声场建模的膨胀腔消声器声学性能分析及试验

针对圆柱形膨胀腔消声器三维建模及声学性能分析问题, 提出一种基于切比雪夫变分原理的耦合声场建模方法, 建立三维圆柱形膨胀腔消声器理论模型并搭建试验台架, 传递损失试验结果验证了理论模型的准确性. 将膨胀腔消声器内部声场分解为多个子声场, 基于子声场间压力与质点振速连续性条件, 推导声场耦合变分公式, 构建子声场拉格朗日泛函. 将子声场声压函数展开为切比雪夫-傅里叶级数形式, 通过瑞利-里兹法求解膨胀腔消声器频率、声压响应及传递损失. 计算并对比分析扩张比、扩张腔长度、进出口管偏置对膨胀腔消声器消声性能的影响. 结果表明: 扩张比增大会有效提高消声器在低频段的消声性能, 进出口管的偏置对消声器消声性能影响很小.     

LC–MS/MS determination and interaction of the main components from the traditional Chinese drug pair Danshen–Sanqi based on rat intestinal absorption

The Chinese drug pair Danshen (Salvia miltiorrhiza)–Sanqi (Panax ginseng) has been widely used for centuries treating various cardiovascular disorders, among which salvianlic acid B (SAB), ginsenoside Rg₁ (GRg₁), ginsenoside Rb₁ (GRb₁) and notoginsenoside R₁ (NGR₁) were identified as the major components. The present study focused on the interaction between these components based on investigating their intestinal absorption using the Ussing chamber technique. The concentrations of SAB, GRg₁, GRb1 and NGR₁ in the intestinal perfusate were determined by LC–MS/MS method, followed by Q (accumulative quantity) and P_app (apparent permeability). The results showed that all these four main components displayed very low permeabilities, which implied their poor absorption in the rat intestine. The intestinal absorption level of SAB displayed regioselectivity: duodenum < jejunum < ileum. However, there was no significant difference in the absorption of GRg₁ and GRb₁ in the different segments. The Q and P_app values of the four main components were obviously increased in jejunum when co‐administrating Danshen extract with Sanqi extract. In conclusion, compatibility of Danshen and Sanqi could remarkably improve the intestinal absorption level of the main components in the pair. To some extent, this might explain the nature of the compatibility mechanisms of composite formulae in TCMs.     

Numerical study of unsteady flow and heat transfer of circular tangential direction jets flowing over the inner cylinder surface in the annular chamber

In order to understand the dynamics of vortices on heat transfer, the unsteady flow field of tangential direction jets flowing in the annular chamber is numerically investigated by scale-adaptive simulation (SAS). The jet Reynolds number is 332,000 based on the jet’s diameter and inflow velocity for a specific geometric model. The analogy theory is used to obtain the convective heat transfer coefficient distribution on the hub surface. Spectral analysis via fast Fourier transform (FFT) is used to analyze frequency information that flows inside the chamber. The proper orthogonal decomposition (POD) method is performed on the velocity field in the chamber and the convective heat transfer coefficient on the hub surface using a snapshot method. The fast Fourier transform helps find the dominant frequency of the unsteady flow in the chamber. The time sequence of velocity fields on the radial plane shows the presence of cyclic flapping of the jet. The proper orthogonal decomposition analysis indicates that the unsteady periodic flow phenomenon in the chamber and unsteady heat transfer on the hub surface are mainly related to the dynamics of the counter-rotating vortices caused by the jet.     

Activity coefficients and excess Gibbs’ energies of the binary mixtures formed by 2-cyanopyrazine with some chloroaliphatics at 95.5 kPa

Bubble points at a pressure of 95.5?kPa, over the entire composition range are measured for the binary mixtures formed by 2-cyanopyrazine with: 1,2-dichloroethane, 1,1,2,2-tetrachloroethane, trichloroethylene and tetrachloroethylene making use of a Swietoslawski type ebulliometer. The liquid phase composition versus temperature measurements are found to be well represented by the Wilson model. Computed values of the activity coefficients and excess Gibbs’ energies are also presented along with the phase equilibrium data.