Aggregation of Electrochemically Active Conjugated Organic Molecules and Its Impact on Aqueous Organic Redox Flow Batteries

Molecule aggregation in solution is acknowledged to be universal and can regulate the molecule's physiochemical properties, which however has been rarely investigated in electrochemistry. Herein, an electrochemical method is developed to quantitatively study the aggregation behavior of the target molecule methyl viologen dichloride. It is found that the oxidation state dicationic ions stay discrete, while the singly-reduced state monoradicals yield a concentration-dependent aggregation behavior. As a result, the molecule's energy level and its redox potential can be effectively regulated. This work does not only provide a method to investigate the molecular aggregation, but also demonstrates the feasibility to tune redox flow battery's performance by regulating the aggregation behavior.     

Pushing the Upper Limit of Nucleophilicity Scales by Mesoionic N-Heterocyclic Olefins

A series of mesoionic, 1,2,3-triazole-derived N-heterocyclic olefins (mNHOs), which have an extraordinarily electron-rich exocyclic CC-double bond, was synthesized and spectroscopically characterized, in selected cases by X-ray crystallography. The kinetics of their reactions with arylidene malonates, ArCH=C(CO₂Et)₂, which gave zwitterionic adducts, were investigated photometrically in THF at 20 °C. The resulting second-order rate constants k₂(20 °C) correlate linearly with the reported electrophilicity parameters E of the arylidene malonates (reference electrophiles), thus providing the nucleophile-specific N and s_N parameters of the mNHOs according to the correlation lg k₂(20 °C)=s_N(N+E). With 21<N<32, the mNHOs are much stronger nucleophiles than conventional NHOs. Some mNHOs even excel the reactivity of mono- and diacceptor-substituted carbanions. It is exemplarily shown that the reactivity parameters thus obtained allow to calculate the rate constants for mNHO reactions with further Michael acceptors and predict the scope of reactions with other electrophilic reaction partners including carbon dioxide, which gives zwitterionic mNHO-carboxylates. The nucleophilicity parameters N correlate linearly with a linear combination of the quantum-chemically calculated methyl cation affinities and buried volumes of mNHOs, which offers a valuable tool to tailor the reactivities of strong carbon nucleophiles.     

Efficient photocatalytic degradation of methyl orange dye using facilely synthesized α-Fe2O3 nanoparticles

In this paper, α-Fe₂O₃ nanoparticles were fabricated via the combustion process using glucose and sucrose as organic fuels for the first time. The fabricated products were characterized using XRD, FT-IR, HR-TEM, and UV–vis spectrophotometer. The average crystallite size of the α-Fe₂O₃ samples, which were synthesized using glucose and sucrose fuels, is 27.25 and 6.13 nm, respectively. The HR-TEM images confirmed the presence of spherical and irregular shapes with an average diameter of 31.92 and 8.83 nm for the α-Fe₂O₃ samples, which were synthesized using glucose and sucrose fuels, respectively. The optical energy gap of the α-Fe₂O₃ samples, which were synthesized using glucose and sucrose fuels, is 2.00 and 2.48 eV, respectively. Additionally, the synthesized α-Fe₂O₃ samples were employed as a photocatalyst for the degradation of methyl orange dye under UV irradiations in the absence and presence of hydrogen peroxide. The optimum pH, irradiation time, and dose of α-Fe₂O₃ that achieved the highest degradation efficiency in the presence of hydrogen peroxide (82.17 % in the case of using an α-Fe₂O₃ sample which was synthesized using glucose or 95.31 % in the case of using an α-Fe₂O₃ sample which was synthesized using sucrose) are 3, 100 min, and 0.05 g, respectively.     

Infrared spectra and UV-induced photochemistry of methyl aziridine-2-carboxylate isolated in argon and xenon matrices

Methyl aziridine-2-carboxylate (MA2C) has been isolated in low temperature argon and xenon matrices and its structure and photochemistry were studied by FTIR spectroscopy. The reactant as well as the main photoproducts were characterized by comparison of their experimental IR spectra with spectra calculated at the DFT(B3LYP)/6-311++G(d,p) level. The theoretical calculations predicted the existence of two low energy MA2C conformers, differing by the orientation of the OCCN dihedral angle. Both conformers were identified in the studied matrices. Both narrowband tunable and broadband UV irradiations of matrix-isolated MA2C yielded isomerization photoproducts resulting from cleavage of the CC and weakest CN bonds of the aziridine ring. Irradiation with UV laser-light at λ = 235 nm resulted in the formation of the E isomer of methyl 2-(methylimino)-acetate (MMIA) and the Z isomer of methyl 3-iminopropanoate (M3IP). Subsequent irradiation at 290 nm led to observation of new bands resulting from E → Z isomerization of MMIA, while bands due to M3IP remained unchanged. The photoproduced Z isomer of MMIA could be subsequently consumed upon higher-wavelength irradiation (λ = 330 nm). The initially produced MMIA conformer was found to obey the nonequilibrium of excited rotamers (NEER) principle. No photoproducts resulting from the cleavage of the strongest CN bond of the MA2C aziridine ring were observed, nor that of methyl 3-aminoacrylate (M3AA), which could in principle be obtained also by cleavage of the weakest CN bond of the MA2C aziridine ring, but would imply a different H-atom migration simultaneous with the ring opening process. These results indicate that both the differential electronic characteristics of the CN bonds of substituted aziridine rings and the type of required H-atom migration are major factors in determining the specific photochemistries of substituted aziridines. Photofragmentation reactions of MA2C were also observed, through identification of various related products, e.g., acetonitrile, methanol, methane, CO and CO₂.     

Adsorption of methyl orange on nanoparticles of a synthetic zeolite NaA/CuO

CuO supported on an NaA zeolite (CuO/NaA) was prepared with an NaA zeolite through the ion-exchange (CuO/NaA) method. The morphology and the physicochemical properties of the prepared samples were investigated by XRD, MEB, and EDS. The various parameters, such as contact time, catalyst dose, initial dye concentration, initial pH, and temperature, influencing the adsorption of methyl orange (MO) were optimized. The MO adsorption equilibrium was reached after 240 min of contact time. Removal of MO is better at neutral pH than in acidic and alkaline solutions. Among the tested models, the equilibrium adsorption data are well fitted by the Langmuir isotherm. The adsorption kinetics is best described by the pseudo-second-order model. The evaluation of the thermodynamic parameters, i.e. ΔG^o, ΔH^o, and ΔS^o, revealed that MO adsorption was spontaneous, while the activation energy (20.98 kJ/mol) indicates a physical adsorption. The photodegradation of MO decreased from 100 mg/L down to 2 mg/L when the solution is exposed to visible light.     

Removal of Anionic Dyes from Aqueous Solution with Layered Cationic Aluminum Oxyhydroxide

It is highly desired yet challenged to find an adsorbent with low cost and excellent performance in the removal of organic dyes from aqueous solution. Here we reported that a layered cationic aluminum oxyhydroxide material hydrothermally synthesized from the low-cost source materials of AlCl₃∙6H₂O, CaO and H₂O, known as JU-111, can meet such criterion in removing methyl orange(MO) and Congo red(CR). JU-111 shows fast adsorption kinetics[especially for CR(15 s)] and high adsorption capacity(MO:>1000 mg/g; CR:>2900 mg/g), surpassing most of the reported adsorbents. Comprehensive characterizations of the adsorption process of MO and CR revealed that both adsorptions were achieved via the anion exchange process. The characteristics of extremely low cost and excellent performance render JU-111 great potential in the practical applications in the removal of anionic dyes.     

Development of highly ionic conductive cellulose acetate-g-poly (2-acrylamido-2-methylpropane sulfonic acid-co-methyl methacrylate) graft copolymer membranes

A novel cellulose acetate-g-poly (2-acrylamido-2-methylpropane sulfonic acid-co- methyl methacrylate) copolymer was prepared via free radical polymerization for the first time. The chemical structure of the graft copolymer was confirmed using FT-IR, ¹H NMR and EDX. The TGA and DSC investigated the thermal changes. Factors affecting the grafting process were studied and various grafting characteristic parameters such as grafting efficiency (%), grafting yield (%) and add-on value (%) were determined. Flexible membranes based on different graft copolymer compositions were fabricated by simple solution casting. Physicochemical properties including ion exchange capability (IEC), water uptake (WU) and proton conductivity (σ) were evaluated. These membranes demonstrated higher IEC, WU and conductivity than the pristine CA. The maximum proton conductivity of the CA-g-poly (2-acrylamido-2-methylpropane sulfonic acid-co- methyl methacrylate) copolymer membrane (68%; Add-on %) was found to be 6.44 × 10⁻³ S/cm compared with 0.035 × 10⁻³ S/cm of the pristine CA. Thus, the appropriate graft copolymer composition will allow fine-tuning of the physical characteristics and led to several potential applications, such as polyelectrolyte fuel cells membranes or biodiesel production.     

Efficient Synthesis of p-Hydroxyphenyl Ethanol from Hydrogenation of Methyl p-Hydroxyphenylacetate with CNTs-promoted Cu-Zr Catalyst

Hydrogenation of methyl p-hydroxyphenylacetate has been used for the synthesis of p-hydroxyphenyl ethanol. The reaction was catalyzed by Cu_iZr_j-x%(mass fraction) carbon nanotubes(CNTs) catalysts. Incorporation of a minor amount of CNTs into Cu_iZr_j oxide can visibly increase the catalytic activity for the synthesis of p-hydroxyphenyl ethanol. The yield of p-hydroxyphenyl ethanol reaches 94.2% over a co-precipitated catalyst of Cu₃Zr₁ oxide with 11.0%CNTs. Its catalytic activity shows no obvious decrease after three cycles. This is much better than the CNT-free co-precipitated catalyst with a good yield of 81.1%, Cu₃Zr₁-0%CNTs.     

Reduced Graphene Oxide Supported Cobalt Bipyridyl Complex for Sensitive Detection of Methyl Parathion in Fruits and Vegetables

Herein, we are described a green route to prepare reduced graphene oxide supported cobalt inorganic complex nanocomposite (GRGO/[Co(bpy)₃]) (bpy=2,2′‐bipyridine) through facile and wet chemical approach. The formation of the nanocomposite was confirmed through suitable physical and chemical characterization techniques. The GRGO/[Co(bpy)₃] nanocomposite was coated on the pretreated glassy carbon electrode (GCE). The GCE/GRGO/[Co(bpy)₃] modified electrode has excellent electrocatalytic ability towards methyl parathion reduction, while the overpotential drops drastically to –0.18 V (vs. Ag/AgCl). Moreover, the effect of concentration, scan rate and electrolyte pH were detail studied. Besides, the linear response range was 0.05‐1700 μM and the detection limit was 0.0029 μM (S/N=3) and the sensitivity was 1.8197 μA μM⁻¹ cm⁻². Moreover, the fabricated electrode has high level of selectivity, which delivers satisfactory repeatability, reproducibility and stability. The sensing method was successfully demonstrated in real samples such as, tomato and apple samples.     

Poly(Methyl Red) Modified Glassy Carbon Electrodes: Electrosynthesis,Characterization, and Sensor Behavior

Poly(methyl red), PMR, was electropolymerized on glassy carbon electrodes by potential cycling in 50 mM phosphate buffer solution at pH 7.0 and 8.0 and Britton Robinson buffer solution in the pH range 7.0‐11.0. The electrochemical behavior of PMR modified electrodes was investigated by cyclic voltammetry in Britton Robinson buffer solution at different pHs from 5.0 to 10.0 and found that the best PMR film formation was obtained at pH 9.0. Uric acid was quantitatively determined at PMR modified electrodes by cyclic voltammetry and differential pulse voltammetry in Britton Robinson buffer at pH 5.0. Both methods presented a linear dependence between the anodic peak current and the concentration of uric acid in the range of 0.4 to 60 μM and 0.08 to 100 μM with the limits of detection of 0.038 and 0.009 μM for cyclic voltammetry and differential pulse voltammetry, respectively. Poly(methyl red) as redox mediator allowed the determination of uric acid without any interferences from the substances in serum samples.