融合插值点优化的多项式结构宽带波束形成器设计方法*

多项式结构设计方法是主瓣指向可调宽带波束形成器设计的一类重要方法。多项式结构的阶数是有限的,导致主瓣实际指向与期望指向之间存在偏差,因而影响了波束形成器的指向性指数。针对这一问题,该文提出了一种基于插值点优化的多项式结构宽带波束形成器设计方法。首先,引入多项式结构插值点处阵列响应的空间导数约束,以减小主瓣指向偏差;进而利用粒子群优化算法对多项式结构中的插值点进行优化,以充分利用插值点位置提供的自由度进一步提升多项式结构宽带波束形成器的性能。优化设计结果表明,与现有设计方法相比,该文提出的方法不仅降低了主瓣的指向偏差,同时也提高了指向性指数,有效改善了多项式结构宽带波束形成器的性能。     

Design of robust differential microphone arrays with the Jacobi–Anger expansion

Due to their small size, differential microphone arrays (DMAs) are very attractive. Moreover, they have been effective in combating noise and reverberation. Recently, a new class of DMAs of different orders have been developed with the MacLaurin’s series and the frequency-independent patterns. However, the MacLaurin’s series does not approximate well the exponential function, which appears in the general definition of the beampattern, when the intersensor spacing is not small enough. To circumvent this problem, we propose in this paper to approximate the exponential function with the Jacobi–Anger expansion. Based on this approximation and the frequency-independent Chebyshev patterns, we derive first-, second-, and third-order DMAs. Furthermore, in order to improve the robustness of DMAs against white noise amplification, we propose to use more microphones combined with minimum-norm filters. It is also shown that the Jacobi–Anger expansion is optimal from a mean-squared error perspective. Simulations are carried out to evaluate the performance of the proposed DMAs.     

Characterisation of tram noise emission and contribution of the noise sources

The recent expansion of French tram networks and the related local residential complaints mean that a better knowledge of the situations leading to negative reactions from the local inhabitants is required. Hence a research project has been conducted to evaluate and describe noise and vibration emission of trams as well as the perception by the local residents. This paper investigates tram noise emission on common straight track sections, involving two vehicle scales. First the acoustic power and the mean vertical directivity of the total tramset is assessed using an arc of microphones. Then the localisation and the analysis of the main noise sources are performed by means of a cross array during the tram pass-by. Two tram types representing two generations of French rolling stock, both running on two sites with distinct track characteristics, have been investigated considering the effect of speed, tram type, and track type on the noise source contributions and spectral features. Most sources are located in the lower part of the trams, mainly related to rolling noise, with a strong dependence on speed and track type. The tram type dependency, although globally of second importance, influences greatly the noise spectral distribution and behaviour. The HVAC was the only roof-mounted source which could be detected; its contribution towards building storeys becomes significant in configurations of low rolling noise. A tram noise emission model based on the various noise sources has been developed.     

液体中光击穿所激发声场的方向性研究

从液体中光击穿所激发声场的柱体模型和靶盘模型出发,运用声学基础的理论原理,提出了等离子体椭球模型,对光击穿所激发声场的方向性进行了理论研究.通过MATLAB仿真得到此声场的方向特性图,进而分析和比较了能量不同、照射区域大小不同的激光束所激发声场的方向性.研究表明等离子体椭球模型更符合实验情况.     

一种拓宽凸球面压电换能器指向性的方法

利用有限元和边界元耦合的方法对涂环氧树脂后的压电陶瓷凸球面换能器进行了指向性仿真计算,发现这种形式的换能器具有较宽的指向性开角。实验测量结果证明了上述结论。     

Modelling of the sound field radiated by multibeam echosounders for acoustical impact assessment

Multi-Beam Echo-Sounders (MBES) designed for seafloor-mapping applications are today a major tool for ocean exploration and monitoring. Concerns have been raised about their impact towards marine life and especially marine mammals, although their inherent characteristics (high frequencies, short signals and narrow transmitting lobes) actually minimize this possibility. The present paper proposes an analysis of MBES radiation characteristics (pulse design, source level and radiation directivity pattern) accounting for the various geometries met today and expressed according to the metrics used for acoustical impact assessment (maximum Sound Pressure Level, and cumulative Sound Exposure Level). A detailed radiation model is proposed, including the transmission through directivity sidelobes, and applied to three typical MBES examples. A simplified radiation model is then defined, in order to extend it to the case of the cumulative insonification by a MBES moving along a survey line. An approximated analytical model is proposed for the accumulated intensity, showing good agreement with the complete simulation of insonification; it is applied to the worst-case configuration of a low-frequency (12 kHz) multi-sector system. The computation of ranges corresponding to impact thresholds accepted today shows that impacts in terms of injury are negligible for both SPL and SEL; however behavioural response impacts cannot be excluded, and should require specific experimentation.     

优化扬声器阵列的指向性与声功率级

提出了同时优化扬声器阵列的指向性和声功率级的方法。运用该方法可以优化扬声器阵列的输入电压分布,获得指向性和声功率级二者兼顾的扬声器阵列。本方法不必使用复杂的与频率相关的信号处理装置。模拟结果和实验测量结果表明该方法是可行的和有效的。     

A single hop architecture exploiting cooperative beamforming for wireless sensor networks

In this paper, we propose a single hop architecture for a cooperative wireless sensor network and analyze the attained distributed beamforming gain performance using the theory of random arrays. All nodes in the system transmit a single carrier such that the signals add up constructively towards the direction of the fusion center. The potential directive beamforming gains are investigated for different sensor network densities which are expressed as the number of nodes per carrier wavelength squared. The multiple access capability of the sensor network is achieved by employing an on-off keying orthogonal signaling technique, which is usually employed in atmospheric optical systems. Finally, we investigate the average loss in directivity gain when the received signal from each sensor node follows a Ricean distribution. The results show that high directive gains can be achieved in practical wireless sensor networks using simple sensor nodes.     

Room acoustic investigation of actors’ positions and orientations for various theatre configurations in a moderate-sized drama theatre

The present study is concerned with optimum positions and orientations of theatre performers when acting off-stage in a moderate-sized theatre. It is a case study in which five theatre configurations of the drama theatre, a proscenium, an arena, and three extended stage configurations, have been numerically investigated after calibrating computer models with experimental data. An analysis of a human voice pattern in a free-field concluded that a speech in a range of the azimuth angle [−50°, 50°] with respect to the performer’s frontal direction is equally loud in a statistical sense. As a consequence of the directive human voice, an early energy ratio, Definition (D₅₀), is higher within this azimuth angle range. By changing the orientation and/or the position of an actor, the mean D₅₀ over the audience can be improved by more than one just noticeable difference (JND). In terms of uniformity and degree of speech intelligibility, the edge of the extended platform for the conventional and the boundary of the acting area for the arena and extended stage configurations are generally recommended.     

Quantitative evaluation of ultrasonic C-scan image in acoustically homogeneous and layered anisotropic materials using three dimensional ray tracing method

Quantitative evaluation of ultrasonic C-scan images in homogeneous and layered anisotropic austenitic materials is of general importance for understanding the influence of anisotropy on wave fields during ultrasonic non-destructive testing and evaluation of these materials. In this contribution, a three dimensional ray tracing method is presented for evaluating ultrasonic C-scan images quantitatively in general homogeneous and layered anisotropic austenitic materials. The directivity of the ultrasonic ray source in general homogeneous columnar grained anisotropic austenitic steel material (including layback orientation) is obtained in three dimensions based on Lamb’s reciprocity theorem. As a prerequisite for ray tracing model, the problem of ultrasonic ray energy reflection and transmission coefficients at an interface between (a) isotropic base material and anisotropic austenitic weld material (including layback orientation), (b) two adjacent anisotropic weld metals and (c) anisotropic weld metal and isotropic base material is solved in three dimensions. The influence of columnar grain orientation and layback orientation on ultrasonic C-scan image is quantitatively analyzed in the context of ultrasonic testing of homogeneous and layered austenitic steel materials. The presented quantitative results provide valuable information during ultrasonic characterization of homogeneous and layered anisotropic austenitic steel materials.