Salt effect on bilayer phase transitions of dipalmitoylphosphatidylglycerol in saline water under high pressure

ABSTRACT

The phase transitions of dipalmitoylphosphatidylglycerol (DPPG) bilayer membrane at high NaCl concentrations under high pressure were investigated to construct the temperature–pressure phase diagram and to determine phase-transition properties. The constructed phase diagrams exhibited qualitative resemblance to that of the dipalmitoylphosphatidylcholine (DPPC) bilayer membrane: they showed the gel-phase polymorphism including the pressure-induced bilayer interdigitation. The phase-transition properties of the DPPG bilayer membrane changed in a salt concentration-dependent manner. We discussed the salt effect on the DPPG bilayer membrane from the variation in interactions between the polar head groups of the PG molecules.     

Non-bilayer formation in the DPPE-DPPG vesicle system induced by deep rough mutant of Salmonella minnesota R595 lipopolysaccharide

The vesicle system consisting of 80 mol% dipalmitoylphosphatidylethanolamine (DPPE) and 20 mol% dipalmitoylphosphatidylglycerol (DPPG) undergoes to structural changes caused by various concentrations of Salmonella minnesota R595 lipopolysaccharide (LPS). The phenomenon was investigated by methods applying small- and wide-angle X-ray scattering (SAXS and WAXS), calorimetry (DSC) and freeze-fracture. In the low LPS concentration regime (investigated at 0.02 LPS/DPPE–DPPG molar ratio) a phase separation was observed. Two kind of domains are formed which are rich and poor in DPPE and in these domains cubic and lamellar structures are present, respectively. Increasing the LPS concentration up to 0.1 LPS/DPPE–DPPG molar ratio the phase separation is more expressed and the temperature domains of the phase transitions are more different. Increasing the temperature chain melting of the lamellar phase occurs first and destruction of the cubic phase is observed later. At high LPS concentration (equimolar ratio of LPS/DPPE–DPPG), where this amphiphilic molecule cannot be considered any more a guest molecule, the cubic structure dominates the phase behaviour of the LPS molecules.     

Dynamic Behaviors and Morphology Change of Anionic Phospholipid DPPG Monolayer Caused by Bovine Serum Albumin at Air-Water Interface

The interaction between bovine serum albumin (BSA) and the anionic 1.2-dipalmitoyl-snglycero- 3-(phospho-rac-(1-glycerol)) (sodium salt) (DPPG) phospholipid at different subphase pH values was investigated at air-water interface through surface pressure measurements and atomic force microscopy (AFM) observation. By analyzing surface pressure-mean molecular area (π-A) isotherms, the limiting molecular area in the closed packing state-the concentration of BSA (A_lim-[BSA]) curves, the compressibility coefficient-surface pressure (C_S^-1-π) curves and the difference value of mean molecular area-the concentration of BSA (ΔA-[BSA]) curves, we obtained that the mean molecular area of DPPG monolayer became much larger when the concentration of BSA in the subphase increased at pH=3 and 5. But the isotherms had no significant change at different amount of BSA at pH=10. In addition, the amount of BSA molecules adsorbed onto the lipid monolayer reached a threshold value when [BSA]>5×10^-8 mol/L for all pHs. From the surface pressure-time (π-t) data, we obtained that desorption and adsorption processes occurred at pH=3, however, there was only desorption process occurring at pH=5 and 10. These results showed that the interaction mechanism between DPPG and BSA molecules was affected by the pH of subphase. BSA molecules were adsorbed onto the DPPG monolayers mainly through the hydrophobic interaction at pH=3 and 5, and the strength of hydrophobic interaction at pH=3 was stronger than the case of pH=5. At pH=10, a weaker hydrophobic interaction and a stronger electrostatic repulsion existed between DPPG and BSA molecules. AFM images revealed that the pH of subphase and [BSA] could affect the morphology features of the monolayers, which was consistent with these curves. The study provides an important experimental basis and theoretical support to understand the interaction between lipid and BSA at the air-water interface.     

Adsorption of DNA onto anionic lipid surfaces

Currently self-assembled DNA delivery systems composed of DNA multivalent cations and anionic lipids are considered to be promising tools for gene therapy. These systems become an alternative to traditional cationic lipid–DNA complexes because of their low cytotoxicity lipids. However, currently these nonviral gene delivery methods exhibit low transfection efficiencies. This feature is in large part due to the poorly understood DNA complexation mechanisms at the molecular level. It is well-known that the adsorption of DNA onto like charged lipid surfaces requires the presence of multivalent cations that act as bridges between DNA and anionic lipids. Unfortunately, the molecular mechanisms behind such adsorption phenomenon still remain unclear. Accordingly a historical background of experimental evidence related to adsorption and complexation of DNA onto anionic lipid surfaces mediated by different multivalent cations is firstly reviewed. Next, recent experiments aimed to characterise the interfacial adsorption of DNA onto a model anionic phospholipid monolayer mediated by Ca^2 + (including AFM images) are discussed. Afterwards, modelling studies of DNA adsorption onto charged surfaces are summarised before presenting preliminary results obtained from both CG and all-atomic MD computer simulations. Our results allow us to establish the optimal conditions for cation-mediated adsorption of DNA onto negatively charged surfaces. Moreover, atomistic simulations provide an excellent framework to understand the interaction between DNA and anionic lipids in the presence of divalent cations. Accordingly,our simulation results in conjunction go beyond the macroscopic picture in which DNA is stuck to anionic membranes by using multivalent cations that form glue layers between them. Structural aspects of the DNA adsorption and molecular binding between the different charged groups from DNA and lipids in the presenceof divalent cations are reported in the last part of the study. Although this research work is far from biomedical applications, we truly believe that scientific advances in this line will assist, at least in part, in the rationaldesign and development of optimal carrier systems for genes and applicable to other drugs.     

Synthesis of a liposome incorporated 1-carboxyalkylxanthine-phospholipid conjugate and its recognition by an RNA aptamer

RNA or DNA aptamers have received much attention in recent literature as therapeutic agents and chromatographic matrices, however, their use in analytical methodologies is relatively unexplored. We describe here investigations aiming to combine this promising technology with versatile liposomes in a competitive assay format. Thus, a phospholipid derivative of an unsymmetrical 1,3-disubstituted xanthine (1-carboxyethyl-3-methylxanthine-DPPE) was prepared for incorporation into the lipid bilayers of dye-encapsulating liposomes. Its synthesis and characterization using GC-MS, ¹H NMR, and HPLC are described. Equilibrium filtration experiments using enzyme linked immunosorbent assays (ELISAs) were completed to assess the affinity for theophylline of an unmodified RNA aptamer and one that had been modified on the 3′ end with biotin. A dissociation constant (K_d) for theophylline with the unmodified RNA aptamer of 0.9 μM and biotinylated aptamer of 1.0 μM was determined which showed that this modification did not affect the aptamer's affinity using this technique. The observed K_d values correlated well to the previously reported value of 0.6 μM. Experiments were also carried out in a competitive manner with the prepared 1-carboxypropyl-3-methylxanthine intermediate, and the final 1-carboxypropyl-3-methylxanthine-DPPE conjugate once it had been incorporated into the bilayers of liposomes. The K_d value for 1-carboxypropyl-3-methylxanthine was approximately 2.7 μM. Finally, successful binding to theophylline-analog-tagged liposomes in a competitive assay format was shown versus liposomes prepared without the tag.     

在气/液界面牛血清蛋白对阴离子磷脂DPPG脂单层膜的动态行为和形貌变化的影响

The interaction between bovine serum albumin (BSA) and the anionic 1.2-dipalmitoyl-snglycero- 3-(phospho-rac-(1-glycerol)) (sodium salt) (DPPG) phospholipid at different subphase pH values was investigated at air-water interface through surface pressure measurements and atomic force microscopy (AFM) observation. By analyzing surface pressure-mean molecular area (π-A) isotherms, the limiting molecular area in the closed packing state-the concentration of BSA (A_lim-[BSA]) curves, the compressibility coefficient-surface pressure (C_S^-1-π) curves and the difference value of mean molecular area-the concentration of BSA (ΔA-[BSA]) curves, we obtained that the mean molecular area of DPPG monolayer became much larger when the concentration of BSA in the subphase increased at pH=3 and 5. But the isotherms had no significant change at different amount of BSA at pH=10. In addition, the amount of BSA molecules adsorbed onto the lipid monolayer reached a threshold value when [BSA]>5×10^-8 mol/L for all pHs. From the surface pressure-time (π-t) data, we obtained that desorption and adsorption processes occurred at pH=3, however, there was only desorption process occurring at pH=5 and 10. These results showed that the interaction mechanism between DPPG and BSA molecules was affected by the pH of subphase. BSA molecules were adsorbed onto the DPPG monolayers mainly through the hydrophobic interaction at pH=3 and 5, and the strength of hydrophobic interaction at pH=3 was stronger than the case of pH=5. At pH=10, a weaker hydrophobic interaction and a stronger electrostatic repulsion existed between DPPG and BSA molecules. AFM images revealed that the pH of subphase and [BSA] could affect the morphology features of the monolayers, which was consistent with these curves. The study provides an important experimental basis and theoretical support to understand the interaction between lipid and BSA at the air-water interface.