Anisotropic Elastic-Viscoplastic Properties at Finite Strains of Injection-Moulded Low-Density Polyethylene

Injection-moulding is one of the most common manufacturing processes used for polymers. In many applications, the mechanical properties of the product is of great importance. Injection-moulding of thin-walled polymer products tends to leave the polymer structure in a state where the mechanical properties are anisotropic, due to alignment of polymer chains along the melt flow direction. The anisotropic elastic-viscoplastic properties of low-density polyethylene, that has undergone an injection-moulding process, are therefore examined in the present work. Test specimens were punched out from injection-moulded plates and tested in uniaxial tension. Three in-plane material directions were investigated. Because of the small thickness of the plates, only the in-plane properties could be determined. Tensile tests with both monotonic and cyclic loading were performed, and the local strains on the surface of the test specimens were measured using image analysis. True stress vs. true strain diagrams were constructed, and the material response was evaluated using an elastic-viscoplasticity law. The components of the anisotropic compliance matrix were determined together with the direction-specific plastic hardening parameters.     

Analysis of F-53B,Gen-X,ADONA, and emerging fluoroalkylether substances in environmental and biomonitoring samples: A review

The persistent, bioaccumulative, and toxic properties of certain per- and polyfluoroalkyl substances (PFAS) raise concerns for environmental and human health. This has led to the gradual phase-out from production and commerce of some legacy PFAS. Fluoroalkylether compounds (ether-PFAS) are among the fluorinated alternative chemicals that are beginning to be reported in impacted and background environments. Extensive monitoring activities were conducted since 2015–2019 to bridge knowledge gaps on the environmental fate and effects of ether-PFAS including F-53B (6:2 chlorinated polyfluoroalkyl ether sulfonate [6:2 Cl-PFAES] and 8:2 Cl-PFAES), Gen-X (hexafluoropropylene oxide dimer acid [HFPO-DA]), and ADONA (dodecafluoro-3H-4,8-dioxanonanoate). In recent years, advances in nontarget screening using high-resolution mass spectrometry have revealed the identities of other infrequently monitored ether-PFAS. In this critical review, we provide an up-to-date inventory of the structures of ether-PFAS discovered in the recent literature. Their environmental occurrence, fate, and effects are discussed on a comparative perspective with some legacy PFAS such as perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS). Information on the methods employed for the quantitative and semi-quantitative analysis of ether-PFAS is also provided, including sample preparation and mass spectrometry analysis, analytical performance, and limitations. In particular, the compiled database of MS/MS fragment ions (n = 111) can be useful in spectrum interpretation of novel ether-PFAS. The concluding remarks open on possible research avenues and the challenges that remain to be addressed.     

A-posteriori KAM theory with optimal estimates for partially integrable systems

In this paper we present a-posteriori KAM results for existence of d-dimensional isotropic invariant tori for n-DOF Hamiltonian systems with additional $n?d$ independent first integrals in involution. We carry out a covariant formulation that does not require the use of action-angle variables nor symplectic reduction techniques. The main advantage is that we overcome the curse of dimensionality avoiding the practical shortcomings produced by the use of reduced coordinates, which may cause difficulties and underperformance when quantifying the hypotheses of the KAM theorem in such reduced coordinates. The results include ordinary and (generalized) iso-energetic KAM theorems. The approach is suitable to perform numerical computations and computer assisted proofs.     

Synthesis and Structure Determination of SCM-15: A 3D Large Pore Zeolite with Interconnected Straight 12×12×10-Ring Channels

A new germanosilicate zeolite named SCM-15 (Sinopec Composite Material No. 15), the first zeolite containing a 3-dimensional (3D) channel system with interconnected 12-, 12-, and 10-ring channels (pore sizes: 6.1×7.2, 6.1×7.4, and 5.2×5.9 Å), has been synthesized using neutral 4-pyrrolidinopyridine as organic structure-directing agents (OSDAs). Its structure has been determined by combining single-crystal electron diffraction (SCED) and synchrotron powder X-ray diffraction (SPXD) data. The unique open framework structure of SCM-15 is related to that of FOS-5 ( BEC ), ITQ-7 ( ISV ), PKU-16 ( POS ), ITQ-26 ( IWS ), ITQ-21, Beta polymorph B, and SU-78B, since all these framework structures can be constructed from similar chains which are connected through shared 4-ring or double 4-ring (d4r) units. Based on this relation, six topologically reasonable 3D large or extra-large pore hypothetical zeolites are predicted.