Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

Growth and characterization of two-dimensional crystals for communication and energy applications

This review article covers the growth and characterization of two-dimensional (2D) crystals of transition metal chalcogenides, h-BN, graphene, etc. The chemical vapor transport method for bulk single crystal growth is discussed in detail. Top-down methods like mechanical and liquid exfoliation and bottom-up methods like chemical vapor deposition and molecular beam epitaxy for mono/few-layer growth are described. The optimal characterization techniques such as optical, atomic force, scanning electron, and Raman spectroscopy for identification of mono/few-layer(s) of the 2D crystals are discussed. In addition, a survey was done for the application of 2D crystals for both creation and deterministic transfer of single-photon sources and photovoltaic systems. Finally, the application of plasmonic nanoantenna was proposed for enhanced solar-to-electrical energy conversion and faster/brighter quantum communication devices.     

Boron-Containing Lipids and Liposomes: New Conjugates of Cholesterol with Polyhedral Boron Hydrides

A series of boron-containing lipids were prepared by reactions of cyclic oxonium derivatives of polyhedron boranes and metallacarboranes (closo-dodecaborate anion, cobalt and iron bis(dicarbollides)) with amine and carboxylic acids which are derived from cholesterol. Stable liposomal formulations, on the basis of synthesized boron-containing lipids, hydrogenated soybean l -α-phosphatidylcholine and (HSPC) 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] (DSPE-PEG) as excipients, were prepared and then characterized by dynamic light scattering (DLS) that revealed the formation of particles to be smaller than 200 nm in diameter. The resulting liposomal formulations showed moderate to excellent loading and entrapment efficiency, thus justifying the design of the compounds to fit in the lipid bilayer and ensuring ease of in vivo use for future application. The liposomal formulations based on cobalt and iron bis(dicarbollide)-based lipids were found to be nontoxic against both human breast normal epithelial cells MCF-10A and human breast cancer cells MCF-7.     

Quantitative estimations of bivariate summation‐integral–type operators

In this paper, we study the approximation properties of bivariate summation‐integral–type operators with two parameters . The present work deals within the polynomial weight space. The rate of convergence is obtained while the function belonging to the set of all continuous and bounded function defined on ([0],∞)(×[0],∞) and function belonging to the polynomial weight space with two parameters, also convergence properties, are studied. To know the asymptotic behavior of the proposed bivariate operators, we prove the Voronovskaya type theorem and show the graphical representation for the convergence of the bivariate operators, which is illustrated by graphics using Mathematica. Also with the help of Mathematica, we discuss the comparison by means of the convergence of the proposed bivariate summation‐integral–type operators and Szász‐Mirakjan‐Kantorovich operators for function of two variables with two parameters to the function. In the same direction, we compute the absolute numerical error for the bivariate operators by using Mathematica and is illustrated by tables and also the comparison takes place of the proposed bivariate operators with the bivariate Szász‐Mirakjan operators in the sense of absolute error, which is represented by table. At last, we study the simultaneous approximation for the first‐order partial derivative of the function.     

Electric field induced non-linear multisubband electron mobility in V-shaped asymmetric double quantum well structure

ABSTRACT

We study the effect of the external electric field F_ext on the low-temperature electron mobility μ in an asymmetrically doped Al_xGa_1-xAs based V-shaped double quantum well (VDQW) structure. We show that nonlinearity of µ occurs under double subband occupancy on account of intersubband effects. The field F_ext alters the VDQW potential leading to transfer of subband wave functions between the wells, which affects the scattering potentials and hence μ. In the VDQW structure, due to the alloy channel layer, the alloy disorder (Al-) scattering happens to be significant along with the ionised impurity (Imp-) scattering. The non-linear behaviour of μ is because of μ^Imp, while the overall magnitude of μ is mostly due to μ^Al. The increase of difference in the doping concentrations of the outer barriers increases the nonlinearity of μ. The oscillatory character of μ is amended by varying the width of the well and barrier and also the height of the VDQW. Our results can be used to study VDQW based nanoscale field effect transistor structures.     

Reflection of plane waves in generalized thermoelasticity of type III with nonlocal effect

The generalized thermoelasticity theory based upon the Green and Naghdi model III of thermoelasticity as well as the Eringen's nonlocal elasticity model is used to study the propagation of harmonic plane waves in a nonlocal thermoelastic medium. We found two sets of coupled longitudinal waves, which are dispersive in nature and experience attenuation. In addition to the coupled waves, there also exists one independent vertically shear-type wave, which is dispersive but experiences no attenuation. All these waves are found to be influenced by the elastic nonlocality parameter. Furthermore, the shear-type wave is found to face a critical frequency, while the coupled longitudinal waves may face critical frequencies conditionally. The problem of reflection of the thermoelastic waves at the stress-free insulated and isothermal boundary of a homogeneous, isotropic nonlocal thermoelastic half-space has also been investigated. The formulae for various reflection coefficients and their respective energy ratios are determined in various cases. For a particular material, the effects of the angular frequency and the elastic nonlocal parameter have been shown on phase speeds and the attenuation coefficients of the propagating waves. The effect of the elastic nonlocality on the reflection coefficients and the energy ratios has been observed and depicted graphically. Finally, analysis of the various results has been interpreted.     

Solution-processed electrochemical synthesis of ZnFe2O4 photoanode for photoelectrochemical water splitting

Journal of Solid State Electrochemistry - Herein, we report the synthesis of ZnO nanorod films onto FTO (fluorine-doped tin oxide) substrates using the solution-processed electrodeposition method....     

Semi-wet growth and characterization of multi-functional nano-engineered mixed metal oxides for industrial application

This review paper covers the low temperature wet growth of nano-engineered particles of ZnO-based mixed metal oxides, their growth mechanism, and characterization using X-ray diffraction, SEM, TEM and IR, UV–visible, and XPS spectral techniques. Main focus of this article is centered on low temperature semi-wet methods of synthesis that are suitable for large scale production of zinc oxide-based systems mixed with iron oxide, copper oxide, nickel oxide and cobalt oxide. These mixed metal oxides have broad industrial applications as catalyst, semiconductors, adsorbents, superconductors, electro-ceramics, and antifungal agents in addition to extensive applications in medicines. This paper discusses the low-cost and environment friendly synthesis of these mixed metal oxides, measurement of properties and applicability of these materials systems.     

Trace element determination in high-purity aluminum clad samples by k 0-based internal monostandard instrumental neutron activation analysis

The k₀-based internal monostandard instrumental neutron activation analysis (IM-INAA) method was applied for quantification of trace impurities in seven high purity aluminum samples used as fuel cladding in a research reactor. Samples along with BCS CRM 182 (Si–Al alloy) were irradiated in high flux reactor neutrons for 10–15 h. In situ detection efficiency, needed in concentration calculation ratio by IM-INAA, was obtained using gamma rays of activation products produced in the samples. Elemental concentration ratios obtained with respect to Fe (used as internal monostandard) were converted to absolute concentrations by determining concentration of Fe by relative method of NAA. Concentrations of ten trace elements (Sc, Cr, Co, Zn, Ga, La, Ce, Sm, W and Hf) including major element Fe were determined in this work. The method used is non-destructive in nature and does not need multielement standards. Results of IM-INAA were compared with those obtained by relative method of INAA and inductively coupled plasma atomic emission spectrometry (ICP-AES). Details of methodologies and results obtained by all methods are discussed and compared in the paper.     

The Contrasting Recognition Behavior of β‐Cyclodextrin and Its Sulfobutylether Derivative towards 4′,6‐Diamidino‐2‐phenylindole

The noncovalent interactions between 4′, 6‐diamidino‐2‐phenylindole (DAPI) and sulfobutylether β‐cyclodextrin (SBE₇β‐CD) are evaluated by using photochemical measurements and compared with that of native β‐CD. Contrasting recognition behavior and intriguing modulations in the photochemical behavior of DAPI were observed. In particular, a large enhancement in the fluorescence emission and excited‐state lifetime were seen upon binding to SBE₇β‐CD, with the SBE₇β‐CD inclusion complex being approximately 1000 times stronger than that of β‐CD. The ensuing fluorescence “turn on” was demonstrated to be responsive to chemical stimuli, such as metal ions and adamantylanmine (AD). Upon addition of Ca²⁺/AD, nearly quantitative dissociation of the complex was established to regenerate the free dye and result in fluorescence “turn off”. The SO₃^? groups are believed to be critical for the strong and selective binding of the chromophore and the stimuli‐responsive tuning. This is as an important design criterion for the optimization of host–guest properties through supramolecular association, which is relevant for drug‐delivery applications.