生长溶液配比对MnTeMoO6晶体形态的影响

采用顶部籽晶溶液法生长Mn Te Mo O6晶体,研究了在不同配比生长溶液中Mn Te Mo O6晶体的实际生长形态,模拟计算了Mn Te Mo O6晶体的理想生长形态,探讨了生长溶液配比对晶体形态的影响,选择的3种生长溶液中Mn Te Mo O6∶Te O2∶Mo O3摩尔比分别为1∶2∶2、1∶3∶2和1∶3∶3。结果表明,在3种配比的生长溶液中Mn Te Mo O6晶体的(110)面具有最大的面网密度和最小的生长速率;生长溶液中Te O2和Mo O3的含量和比例影响了晶体在不同方向的生长速率,从而影响到Mn Te Mo O6晶体的实际生长形态。     

Thermodynamics and elastic properties of Ta from first-principles calculations

<正>Within the framework of the quasiharmonic approximation,the thermodynamics and elastic properties of Ta, including phonon density of states(DOS),equation of state,linear thermal expansion coefficient,entropy,enthalpy, heat capacity,elastic constants,bulk modulus,shear modulus,Young’s modulus,microhardness,and sound velocity, are studied using the first-principles projector-augmented wave method.The vibrational contribution to Helmholtz free energy is evaluated from the first-principles phonon DOS and the Debye model.The thermal electronic contribution to Helmholtz free energy is estimated from the integration over the electronic DOS.By comparing the experimental results with the calculation results from the first-principles and the Debye model,it is found that the thermodynamic properties of Ta are depicted well by the first-principles.The elastic properties of Ta from the first-principles are consistent with the available experimental data.     

高压下Ni3Al热力学性质的第一性原理研究

运用第一性原理方法结合准谐Debye-Grüneisen模型研究了高压下Ni3Al的热力学性质,拟合了Ni3Al的状态方程,计算了不同压强下Ni3Al的弹性模量及吉布斯自由能等热力学性质随温度的变化关系. 计算结果表明：采用七阶Birch-Murnaghan方程拟合的晶格常数与实验测量结果吻合较好;零压下弹性模量、吉布斯自由能、焓、熵、热容和体膨胀系数随温度的变化与实验值符合较好;在特定压强下,Ni3Al的弹性模量和吉布斯自由能随温度升高而减小,焓、熵随温度升高而增加;预测的德拜温度约为500K,与实验值符合较好.     

第一性原理研究Ir的热力学和弹性性质

基于准谐近似理论,运用第一性原理投影缀加波方法研究了Ir的热力学和弹性性质,得到Ir的声子谱、状态方程、热容、熵、焓和线膨胀系数,以及弹性常数、弹性模量、剪切模量和杨氏模量随温度的变化关系.结果表明,计算的Ir声子谱和有限的实验测量结果一致;考虑电子对体系自由能贡献后计算的热容、熵、焓和线膨胀系数与实验值符合较好;在2600 K时,Ir的电子定压热容占总定压热容的17％,因此在高温时电子对Ir定压热容的贡献是不能忽略的;理论预测的Ir室温下的弹性常数、弹性模量、剪切模量、杨氏模量和实验值测量值基本吻合,并随温度的增加而逐渐减小.     

GeS分子基态和低激发态的势能曲线与光谱性质

本文以aug-cc-pv5Z为基组, 采用考虑Davidson修正的多参考组态相互作用方法(MRCI+Q)得到了GeS分子基态(X¹Σ⁺)和5个低激发态(1¹Σ, 1¹Δ, A¹Π, 1⁵Σ⁺, 2⁵Σ⁺)的势能曲线. 计算结果表明: 2⁵Σ⁺态为排斥态, 其余5个态为束缚态; 6个态有着共同的离解通道, 离解极限均为Ge(³P)+S(³P). 利用计算得到的势能曲线得了X¹Σ⁺, 1¹Σ^-, 1¹Δ, A¹Π和1⁵Σ⁺态的垂直跃迁能T_e, 平衡键长R_e, 离解能D_e, 谐振频率ω_e, 非谐性常数ω_ex_e及平衡位置的电偶极矩. X¹Σ⁺态的R_e 为2.034 Å, D_e 为5.728 eV, ω_e为571.73 cm^-1, ω_ex_e为1.6816 cm^-1, 平衡位置的电偶极矩为1.9593 Debye. 激发态1¹Σ, 1¹Δ, A¹Π, 1⁵Σ⁺的T_e 依次为25904.81, 26209.22, 32601.19, 43770.26 cm^-1; R_e依次为2.313, 2.322, 2.188, 2.8790 Å; D_e依次为2.524, 2.487, 1.694, 0.3036 eV, ω_e依次为358.90, 353.08, 376.32, 134.96 cm^-1; ω_ex_e依次为1.2421, 1.2151, 1.6608, 1.9095 cm^-1; 平衡位置的电偶极矩依次为1.3178, 1.4719, 1.5917, -1.9785 Debye. 通过求解核运动的薛定谔方程得到了J=0时X¹Σ⁺, 1¹Σ^-, 1¹Δ, A¹Π和1⁵Σ⁺态前30个振动态的振动能级G_v和分子常数B_v, 得到的结果和已有的实验值及其他理论值符合较好.     

第一原理研究Mn掺杂LiNbO3晶体的磁性和光吸收性质

采用基于密度泛函理论和局域密度近似的第一性原理分析了Mn掺杂LiNbO₃晶体的结构, 磁性, 电子特性和光吸收特性. 文中计算了Mn占据Li位和Nb位体系的形成焓, 对应的形成焓分别为-8.340 eV/atom和-8.0062 eV/atom, 也就意味着Mn 原子优先占据Li位. 这也就意味着Mn原子占据Li位的掺杂LiNbO₃晶体结构更稳定. 磁性分析的结果显示, 其对应磁矩也比占据Nb位的高. 进一步分析磁性的来源, 自旋态密度结果显示: Mn掺杂LiNbO₃晶体的磁性主要源于掺杂原子Mn, Mn原子携带的磁矩高达 4.3 μ_B, 显示出高自旋结构. 由于Mn-3d与近邻O-2p及次近邻Nb-4d 轨道的杂化作用, 计算表明: 诱导近邻O原子及次近邻Nb原子产生的磁矩对总磁矩的贡献较小. 通过光学吸收谱的分析, 得出在可见光区Li位被Mn原子替代以后显示出更好的光吸收响应相比于Nb位. 本文还分析了O空位对于LiNbO₃晶体磁性与电子性质的影响, 结果显示O空位的存在可以增加Mn掺杂LiNbO₃体系的磁性.     

Transport Properties and the Entropy-Scaling Law for Liquid Tantalum and Molybdenum under High Pressure

Molecular dynamics simulations are applied to study the transport properties, including the self-diffusion coefficient and viscosity, of liquid tantalum and molybdenum under high pressure conditions. The temperature dependence of self-diffusion coefficient, viscosity and the pair correlation entropy under high pressure conditions are investigated. Our results show that the Arrhenius law well describes the temperature dependence of self-diffusion coefficients and viscosity under high pressure, and the diffusion activation energy decreases with increasing pressure, while the viscosity activation energy increases with increasing pressure. The temperature dependence of the pair correlation entropy is well described by lIT scaling. Furthermore, we find that the entropy-scaling laws, proposed by Rosenfeld for self-diffusion coefficients and viscosity in simple liquids under ambient pressure, still hold well for liquid tantalum and molybdenum under high pressure conditions.     

Phase transition and thermodynamic properties of ThO2：Quasi-harmonic approximation calculations and anharmonic effects

The thermodynamic properties and the phase transition of ThO2 from the cubic structure to the orthorhombic structure are investigated using the first-principles projector-augmented wave method. The vibrational contribution to Helmholtz free energy is evaluated from the first-principles phonon calculations. The anharmonic contribution to quasi-harmonic free energy is accounted for by using an effective method(2010 Phys. Rev. B 81 172301). The results reveal that at ambient temperature, the phase transition from the cubic phase to the orthorhombic phase occurs at 26.45 GPa, which is consistent with the experimental and theoretical data. With increasing temperature, the transition pressure decreases almost linearly. By comparing the experimental results with the calculation results, it is shown that the thermodynamic properties of ThO2 at high temperature improve substantially after including the anharmonic correction to quasi-harmonic free energy.     

预取向半晶态高分子片晶结构形成微观机理及其应力-应变响应特性的分子动力学模拟

通过分子动力学模拟方法对不同预取向聚乙烯醇熔体(polyvinyl alcohol,PVA)形成的半晶态高分子熔体形成核结晶及拉伸过程中的应力-应变响应特性进行了系统地研究.模拟结果显示预取向度高的PVA熔体对应更快的成核动力学.通过追踪全trans伸直链长度(dtt)、成核原子维诺体积(V)和中心对称参数(S)等序参量在不同取向度熔体下的等温成核与结晶演化过程,给出了PVA熔体成核路径及形成半晶态的分子构象;通过对形成的半晶态高分子结构进一步分析,发现随着熔体取向度的增加,晶体和无定型对应的取向度也会增加,但是当应变剪切大于5时,其对应的结晶度、晶体和无定型取向度不再发生变化;通过对无定型区链结构的定义与分析,可知取向度越高的熔体对应越高的Tie链数目,随着熔体取向度的增加,Loop链的数目也会减小;通过恒速拉伸应力测试可知,所形成半晶态高分子结构力学响应会随着取向度及Tie链数增加而增加,当取向及Tie链数目相同时,应力-应变曲线形状大小也基本保持一致.     

第一性原理研究Ir的热力学和弹性性质

基于准谐近似理论,运用第一性原理投影缀加波方法研究了Ir的热力学和弹性性质,得到Ir的声子谱、状态方程、热容、熵、焓和线膨胀系数,以及弹性常数、弹性模量、剪切模量和杨氏模量随温度的变化关系. 结果表明,计算的Ir声子谱和有限的实验测量结果一致;考虑电子对体系自由能贡献后计算的热容、熵、焓和线膨胀系数与实验值符合较好;在2600K时,Ir的电子定压热容占总定压热容的17%,因此在高温时电子对Ir定压热容的贡献是不能忽略的;理论预测的Ir室温下的弹性常数、弹性模量、剪切模量、杨氏模量和实验值测量值基本吻合,并随温度的增加而逐渐减小.