大环镍(Ⅱ)配合物与扁桃酸的手性识别

外消旋大环镍(Ⅱ)配合物[Ni (rac-L)](ClO₄)₂分别与l-和d-扁桃酸阴离子在乙腈/水溶液中反应,通过手性识别得到六配位的[Ni (_RR-L)(S-Man)]ClO₄(1)和[Ni (SS-L)(R-Man)]ClO₄(2)对映异构体(L=5,5,7,12,12,14-六甲基-1,4,8,11-四氮杂环十四烷,Man=扁桃酸)。当[Ni (rac-L)](ClO₄)₂与dl-扁桃酸阴离子反应时得到一对对映体等量存在的共聚物,其中大环配体中RR和SS构型分别优先与l-和d-Man^- 配位形成外消旋混合物,反应过程中发生了手性识别现象,每颗晶体均为手性对映体。当[Ni (rac-L)](ClO₄)₂分别与结构类似的dl-2-苯基丙酸和dl-托品酸阴离子反应时,分别得到化合物[Ni (rac-L)(dl-PPA)]ClO₄(3)(PPA=2-苯基丙酸)和[Ni (rac-L)(dl-Tro)]ClO₄(4)(Tro=托品酸)。X射线单晶衍射结果表明,4个配合物中Ni (Ⅱ)离子均与折叠大环配体L的4个氮原子和2个来自羧基与羟基的氧原子(1和2),或羧基氧原子(3和4)顺式配位,形成六配位八面体构型。配合物1和2属于一对对映异构体,分别通过[Ni (_RR-L)(S-Man)]⁺和[Ni (SS-L)(R-Man)]⁺分子间氢键作用形成一维之字形链状结构。配合物1和2的单手性特征与圆二色(CD)谱测定结果一致。     

配位体修饰氟化锶纳米分层微球的可控合成

以硝酸锶为锶源,氟化钠为氟源,乙二胺四乙酸二钠(EDTANa2)为配位体,经微波促进合成了配位体修饰氟化锶纳米分层微球(1),其结构和形貌经XRD和SEM表征。物料比r[n(EDTANa2)∶n(Sr2+)]和反应温度(t)对1rt形貌影响较大。结果表明,在最佳反应条件[n(Sr2+)5 mmol,r=7,于120℃/600 W反应]下合成的17120分层清晰,分散性好,球体均匀,直径600 nm~800 nm。     

Li3V2（PO4）3/C正极材料在不同电压区间的电化学行为及容量衰减原因

采用溶胶-凝胶法制备锂离子电池正极材料Li3V2(PO4)3/C.通过恒电流充放电测试、循环伏安(CV)、电化学阻抗谱(EIS)等方法,研究了Li3V2(PO4)3/C在不同电压区间的电化学行为(3.0-4.5 V和3.0-4.8 V).结果表明,3.0-4.8 V电压区间的循环性能和倍率性能均不及3.0-4.5 V电压区间的.3.0-4.5 V区间0.1C (1C=150 mA?g-1)倍率首次放电比容量为127.0 mAh?g-1,循环50次后容量保持率为99.5%,而3.0-4.8 V区间的分别为168.2 mAh?g-1和78.5%.经过高倍率测试后再回到0.1C倍率充放电,3.0-4.5 V和3.0-4.8 V的放电比容量分别为初始0.1C倍率的99.0%和80.7%.经过3.0-4.8 V电压区间测试后,少部分第三个锂离子能够在低于4.5 V的电压脱出,使3.0-4.5 V电压区间的放电比容量提升了7.4%. CV结果表明3.0-4.8 V区间的容量损失主要表现为第一个锂离子的不可逆损失.极片的X射线衍射(XRD)和X射线光电子能谱(XPS)分析测试结果表明经过3.0-4.8 V测试后, Li3V2(PO4)3的结构发生了轻微的改变.电感耦合等离子体(ICP)测试结果表明循环后的电解液中含有少量的V.结构变形和V溶解可能是Li3V2(PO4)3在3.0-4.8 V区间容量衰减的主要原因.     

Syntheses and Structures of Two Macrocyclic Nickel(Ⅱ) Complexes Bridging Benzene Polycarboxylic Acid

Two complexes with formulas [Ni L][(Ni L)(IPA)2]·8H2O(1) and [(Ni L)(H2O)2] [(Ni L)(PMA)]·4H2O(2)(L = 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane,IPA2– = isophthalic anion,PMA4– = 1,2,4,5-benzenetetracarboxylic anion) were synthesized and characterized by elemental analyses and IR spectra.The crystal structures were determined by X-ray diffraction.In complex 1,the [Ni L]2+ bridged IPA2– to give [(Ni L)(IPA)2]2– monomer,and the [Ni L]2+ bridged PMA4– to form a one-dimensional chain [(Ni L)(PMA)]n2n– in complex 2.The [Ni L]2+ and [(Ni L)(IPA)2]2–/[(Ni L)(PMA)]2– are connected through intermolecular hydrogen bonding to generate three-dimensional supramolecular structures.     

Isolation and Crystal Structure of Ent-kaurane Diterpenes from Rubus corchorifolius L. f.

In this study, ent-Kaurane-3β,16β,17-triol(1) and ent-kaurane-2α,16β,17-triol(2), were isolated from the leaves of Rubus corchorifolius L. f. Their structures were elucidated based on extensive spectroscopic analysis. NMR experiments identified the two compounds and X-ray crystallographic analysis confirmed their crystal structures. The crystal of 1 belongs to monoclinic with space group P21 and a = 10.7641(3), b = 7.2789(3), c = 11.7862(4) , β = 95.275(3)°, V = 919.55(6) 3, Z = 2, C20H34O4, Mr = 322.49 g/mol, Dc = 1.230 g/m3, F(000) = 376, λ = 1.54178 , μ = 0.661 mm-1, R = 0.0319, and wR = 0.0811 for 10889 observed reflections(Ⅰ 2σ(Ⅰ)). The crystal of 2 is classified as orthorhombic with space group P212121 and a = 10.7641(3), b = 12.72224(19), c = 21.3929(3) , V = 1748.94(4) 3, Z = 4, C20H34O4, Mr = 322.47, Dc = 1.225 Mg/m3 F(000) = 712, λ = 1.54184 , μ = 0.625 mm-1, R = 0.0303 and w R = 0.0759 for 10470 observed reflections(Ⅰ 2σ(Ⅰ)). Meanwhile, the compound revealed low inhibitory activities toward Hep G2, MCF-7, and SCG-7901 cells.     

Progress on High Voltage PEO-based Polymer Solid Electrolytes in Lithium Batteries

Polymer electrolytes have attracted great interest for next-generation lithium-based batteries on account of safety and high energy density. In this review, we assess recent progress on the design of poly(ethylene oxide)(PEO)-based solid polymer electrolytes in high voltage lithium batteries and identify possible side reactions between PEO-based electrolytes and existing cathodes. We provide an overview of the ways to enhance high voltage resistance of PEO-based electrolytes. Those include components blend, molecular design and interface modification. With these efforts, we want to present new insights into rational design of PEO-based electrolytes to develop solid-state lithium batteries for advanced performance.     

基于新型纳米传感材料的DNA生物传感器的应用

DNA是构建纳米技术和生物传感技术新设备的良好构建体。DNA生物传感器由于具有灵敏度高、选择性好等特点,近年来获得了飞速发展。研究发现,金属纳米粒子(MNPs)、碳基纳米材料等一系列纳米材料在传感器设计中提高了电化学DNA传感器的传感性能。本文侧重介绍了场效应晶体管、石墨烯、碳纳米管等新型纳米传感材料,以及基于这些材料的DNA生物传感器的最新进展,最后展望了DNA生物传感器的应用前景。     

基于对荧光铜纳米簇合成的抑制检测三聚氰胺

三聚氰胺能与铜离子(Cu2+)形成配合物,对荧光铜纳米簇的合成有明显抑制作用,且其抑制程度与三聚氰胺浓度在一定范围内呈线性关系.基于此构建了一种简单、快速检测三聚氰胺的方法.以聚T单链DNA为模板合成的铜纳米簇作为荧光探针,当三聚氰胺存在时,Cu2+与三聚氰胺生成配合物,阻碍铜纳米簇的合成,导致荧光强度降低.在优化的实验条件下,三聚氰胺浓度在5~120 μmol/L范围内呈良好的线性关系,检出限为1.5 μmol/L,牛奶样品中三聚氰胺加标回收率为96.3%~104.4%.与传统纳米金/银、量子点等方法相比,本方法具有简单、快速、灵敏等优点.     

复合纤维增强混凝土阻尼测试装置开发与试验研究

纤维与聚合物的掺入可以明显改善混凝土材料的阻尼性能。本文首先给出了正弦交变激励下粘弹性材料三点弯曲梁阻尼特性关系,其次首次自主开发了大尺寸材料的阻尼性能测试装置,然后利用开发的装置在频率(0.5~2.0Hz)条件下测定了6种不同配比复合纤维增强阻尼混凝土的损耗因子与储存模量,最后对纤维的阻尼增强机理进行了初步探讨。试验结果表明:复合纤维增强阻尼混凝土与素混凝土相比,提高了混凝土的损耗因子80%~200%。主要原因是聚合物分子在外力作用下的内耗增加了普通混凝土的阻尼能力,而纤维的阻尼增强机理在于纤维的掺入增加了纤维与水泥基材的界面摩擦力。     

主链型阳离子表面活性剂聚季铵盐的制备

以N,N-二甲基-1,3-丙二胺、尿素及1,4-二氯丁烷为原料,通过共缩聚反应两步法制备了一种新的主链型的水溶性聚季铵盐.采用正交试验获得了制备聚季铵盐的最佳条件：N,N-二甲基-1,3-丙二胺与尿素的物质的量比为2∶1,反应温度为135℃,反应时间为11h,得到中间体双[3-（N,N-二甲基丙胺基）]丙脲,产率高达99％;中间体与1,4-二氯丁烷的物质的量比为1∶1,于90℃下反应6h.采用红外光谱和核磁氢谱对产物结构进行表征,测定了其热稳定性和特性粘数.