Regularity of optimal sets for some functional involving eigenvalues of an operator in divergence form

In this paper we consider minimizers of the functional$\min \{{\lambda }_1(\mathrm{\Omega })+\cdots +{\lambda }_k(\mathrm{\Omega })+\mathrm{\Lambda }|\mathrm{\Omega }|,:\mathrm{\Omega }\subset D\text{ open}\}$ where $D\subset {\mathbb{R}}^d$ is a bounded open set and where $0<{\lambda }_1(\mathrm{\Omega })\le \cdots \le {\lambda }_k(\mathrm{\Omega })$ are the first k eigenvalues on Ω of an operator in divergence form with Dirichlet boundary condition and with Hölder continuous coefficients. We prove that the optimal sets ${\mathrm{\Omega }}^{⁎}$ have finite perimeter and that their free boundary $\partial {\mathrm{\Omega }}^{⁎}\cap D$ is composed of a regular part, which is locally the graph of a $C^{1,\alpha }$-regular function, and a singular part, which is empty if $d<d^{⁎}$, discrete if $d=d^{⁎}$ and of Hausdorff dimension at most $d-d^{⁎}$ if $d>d^{⁎}$, for some $d^{⁎}\in \{5,6,7\}$.     

密度泛函理论方法研究填料表面对聚合物摩擦化学的影响

采用超声分散法制备出氧化铝、高岭土、氧化硅/聚四氟乙烯复合材料, 使用线性往复摩擦磨损试验机对比三种复合材料的摩擦学性能. 结果表明 质量分数10%的氧化铝、高岭土能将聚四氟乙烯的磨损率降低约4个数量级, 而氧化硅仅能降低约3个数量级. 对金属对偶表面形成的转移膜的形貌和化学成分进行分析发现 氧化铝、高岭土/聚四氟乙烯在金属对偶面上形成了高度羧酸盐化的转移膜. 用密度泛函理论对三种填料表面上碳氟分子吸附过程进行模拟, 结果显示氧化铝、高岭土表面的路易斯酸性位点促进了碳氟分子的脱氟过程, 产生了更多的羧酸螯合物的中间产物; 氧化硅缺少路易斯酸性位点, 因此不能促进高度羧酸盐化的转移膜形成.     

Controlling thermomechanical behavior of semicrystalline hydrogenated polynorbornene through the cis- to trans-cyclopentylene ratio

Though polynorbornene synthesized by ring-opening metathesis polymerization has an intrinsically all-cis configuration of the cyclopentylene backbone rings, a fraction of these rings can be epimerized to the trans configuration during hydrogenation over suitable catalysts. By varying the method of hydrogenation, semicrystalline hydrogenated polynorbornenes (hPNs) with trans levels between 0 and 36% were obtained. With increasing trans content, the glass transition temperature, melting point, and enthalpy of melting decrease modestly. By contrast, the temperature at which the hPN crystal transitions into a rotationally disordered polymorph varies strongly with trans content, ranging from 126 °C (all-cis) to 71 °C at 27% trans; at trans contents of 34% and above, no rotationally-ordered phase is observed at any temperature. The room-temperature Young's modulus shows no dependence on trans content, while the yield stress drops by 20% at 1% trans content and slowly decreases further with additional epimerization. The temperature dependence of the Young's modulus differs for trans-containing versus all-cis polymers, while the temperature dependence of the yield stress is set by the polymorph type (rotationally ordered vs. disordered).     

Spectroscopic properties and bond dissociation energies of PbX,PbX±, PbX2 and PbX2± (X ​= ​F,Cl, Br,I)

Ab initio calculations have been performed to investigate some of the spectroscopic properties, like geometry, frequency, electron affinity, ionization potential and finally adiabatic bond dissociation energies (BDEs) of lead monohalides, lead dihalides and their ions viz. PbX, PbX^±, PbX₂, $\mathrm{P}\mathrm{b}{\mathrm{X}}_{\mathrm{2}}^{\pm }$ (X ?= ?F, Cl, Br, I) in their ground state at the QCISD(T)//MP2 level of theory using correlation consistent basis sets. For the validation of MP2 optimized geometry and frequency, we further obtained geometry and frequency of all the neutral and ionic systems using QCISD(T) method with the same basis sets. The BDEs of PbX₂ molecules are calculated using the BDEs of $\mathrm{P}\mathrm{b}{\mathrm{X}}_{\mathrm{2}}^{\pm }$ ions and taking ionization potential and electron affinity of various systems. The calculated values are found in good agreement with the available data. Most of the data for ionic systems are reported first time in literature.     

Lanthanide SMMs Based on Belt Macrocycles: Recent Advances and General Trends

Enhancement of axial magnetic anisotropy is the central objective to push forward the performance of Single-Molecule Magnet (SMM) complexes. In the case of mononuclear lanthanide complexes, the chemical environment around the paramagnetic ion must be tuned to place strongly interacting ligands along either the axial positions or the equatorial plane, depending on the oblate or prolate preference of the selected lanthanide. One classical strategy to achieve a precise chemical environment for a metal centre is using highly structured, chelating ligands. A natural approach for axial-equatorial control is the employment of macrocycles acting in a belt conformation, providing the equatorial coordination environment, and leaving room for axial ligands. In this review, we present a survey of SMMs based on the macrocycle belt motif. Literature systems are divided in three families (crown ether, Schiff-base and metallacrown) and their general properties in terms of structural stability and SMM performance are briefly discussed.     

Comprehensive performance of a ball-milled La0.5Pr0.5Fe11.4Si1.6B0.2Hy/Al magnetocaloric composite

Due to the hydrogen embrittlement effect, La(Fe,Si)₁₃-based hydrides can only exist in powder form, which limits their practical application. In this work, ductile and thermally conductive Al metal was homogeneously mixed with La_0.5Pr_0.5Fe_11.4Si_1.6B_0.2 using the ball milling method. Then hydrogenation and compactness shaping of the magnetocaloric composites were performed in one step via a sintering process under high hydrogen pressure. As the Al content reached 9 wt.%, the La_0.5Pr_0.5Fe_11.4Si_1.6B_0.2H_y/Al composite showed the mechanical behavior of a ductile material with a yield strength of ~44 MPa and an ultimate strength of 269 MPa accompanied by a pronounced improvement in thermal conductivity. Due to the ease of formation of Fe-Al-Si phases and the several micron and submicron sizes of the composite particles caused by ball milling process, the magnetic entropy change of the composites was substantially reduced to ~1.2 J/kg· K-1.5 J/kg· K at 0 T-1.5 T.     

全局优化问题的一个新的无参数填充函数

求全局最优化问题的填充函数算法被提出以来，参数的选取和调整一直是制约算法有效性的因素。如何在实际的计算过程中选取合适的参数，直接影响和决定了运算速度和效率。因此，构造不含参数的填充函数就显得极为重要。提出一个新的无参数的填充函数，对其理论性质进行了分析，并给出相应的填充函数算法，数值计算验证了算法的有效性。     

Performance guarantees of forward and reverse greedy algorithms for minimizing nonsupermodular nonsubmodular functions on a matroid

This letter studies the problem of minimizing increasing set functions, equivalently, maximizing decreasing set functions, over the base matroid. This setting has received great interest, since it generalizes several applied problems including actuator and sensor placement problems in control, task allocation problems, video summarization, and many others. We study two greedy heuristics, namely, the forward and reverse greedy. We provide two novel performance guarantees for the approximate solutions obtained by them depending on both submodularity ratio and curvature.