从头计算方法比较研究B_2Au_4,Al_2Au_4和BAlAu_4的几何和电子结构(英文)

Au/H相似性的研究是现代化学中的一个热门话题.我们从理论上报道Au/H相似的新成员:共价化合物B2Au4,离子化合物Al2Au4和BAl Au4.采用密度泛函和波函数理论方法对比研究了缺电子体系B2Au4、Al2Au4和BAl Au4的几何和电子结构.详细讨论了它们基态结构的轨道、适应性自然密度划分(Ad NDP)和电子局域函数(ELF)分析.计算结果表明稍微扭曲变形的C2B2Au4是基态结构,在这个共价化合物中含有两个B―Au―B三中心二电子(3c-2e)键.然而C3vAl+(Al Au4)-和C3vAl+(BAu4)-被研究证明是含有三个X―Au―Al三中心二电子键的类盐化合物(在Al2Au4中X=Al,BAl Au4中X=B).Al2Au4和BAl Au4是至今为止首例报道的在离子缺电子体系中含有金桥键的化合物.同时计算了B2Au4-、Al2Au4-和BAl Au4-阴离子基态结构的绝热剥离能和垂直剥离能,为实验表征提供依据.文中报道的金桥键为共价键和离子键相结合的缺电子体系提供了一个有趣的键合模式,有助于设计含有高度分散金原子的新材料和催化剂.     

An Aluminum Telluride with a Terminal Al=Te Bond and its Conversion to an Aluminum Tellurocarbonate by CO2 Reduction

Facile access to dimeric heavier aluminum chalcogenides [(NHC)Al(Tipp)-μ-Ch]₂ (NHC=IiPr (1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene, IMe₄ (1,3,4,5-tetramethylimidazol-2-ylidene); Tipp=2,4,6-iPr₃C₆H₂; Ch=Se, Te) by treatment of NHC-stabilized aluminum dihydrides with elemental Se and Te is reported. The higher affinity of IMe₄ in comparison with IiPr toward the Al center in [(NHC)Al(Tipp)-μ-Ch]₂ can be used for ligand exchange. Additionally, the presence of excess IMe₄ allows for cleavage of the dimers to form a rare example of a neutral multiply bonded heavier aluminum chalcogenide in the form of a tetracoordinate aluminum complex, (IMe₄)₂(Tipp)Al=Te. This species reacts with three equivalents of CO₂ across two Al−C^NHC and the Al=Te bond affording a pentacoordinate aluminum complex containing a dianionic tellurocarbonate ligand [CO₂Te]²⁻, which is the first example of tellurium analogue of a carbonate [CO₃]²⁻.     

On the Reactivity of Phosphaalumenes towards C−C Multiple Bonds

Heterocycles containing group 13 and 15 elements such as borazines are an integral part of organic, biomedical and materials chemistry. Surprisingly, heterocycles containing P and Al are rare. We have now utilized phosphaalumenes in reactions with alkynes, alkenes and conjugated double bond systems. With sterically demanding alkynes 1,2-phosphaalumetes were afforded, whereas the reaction with HCCH or HCCSiMe₃ gave 1,4-phosphaaluminabarrelenes. Using styrene saturated 1,2-phosphaalumates were formed, which reacted further with additional styrene to give different regio-isomers of 1,4-aluminaphosphorinanes. Using ethylene, a 1,4-aluminaphosphorinane is obtained, while with 1,3-butadiene a bicyclic system containing an aluminacyclopentane and a phosphirane unit was synthesized. The experimental work is supported by theoretical studies to shed light on the mechanism governing the formation of these heterocycles.     

FER分子筛中铝原子的受限落位

分子筛是一类具有规则孔道或笼状结构的多孔材料,因其独特的结构和可调的酸性而广泛用于石油化工、精细化学品合成、现代煤化工等诸多行业.2006年Iglesia等在具有8元环孔道结构/侧口袋的FER和MOR分子筛上实现了无卤素添加、无贵金属存在条件下,由二甲醚羰基化合成乙酸甲酯的反应.乙酸甲酯通过进一步加氢可实现煤基乙醇的绿色生产.MOR分子筛通常具有较高的催化活性,但失活迅速;FER分子筛表现出良好的催化稳定性,但活性较低.如何在保证FER分子筛稳定性的前提下,进一步提升其羰基化活性是目前研究的热点.前期理论和实验研究发现,二甲醚羰基化反应活性与分子筛8元环孔道中的Br?nsted酸位密度存在正相关.因此,通过优化合成条件,选择性调控铝原子分布在"ferrierite"笼中,可以提高FER分子筛的羰基化反应活性.尽管研究者已在调节FER分子筛铝分布方面进行了大量研究,但对于不同T位上Al原子的精准识别以及对应Br?nsted酸位的可接触性还缺少系统和深入的认识.本文选取了几种代表性模板剂,分别在碱性和含氟体系下制备了系列FER分子筛样品,利用Rietveld精修和模拟退火算法,在原子水平揭示了模板剂种类以及合成介质变化对Al原子在不同T位分布的影响,并结合二甲醚羰基化反应进行了结构和性能的关联.首先选取不同尺寸大小的环状胺(环己胺、哌啶、吡啶、吡咯烷)和链状胺(乙二胺)合成了具有相似形貌、孔结构、酸密度的系列FER分子筛样品.以CHA-Na-FER为例,PXRD精修结果显示,Na+(平衡35％的骨架负电荷)分布在10元环孔道中与O1形成氢键,质子化的环己胺分布在"ferrierite"笼中,并且环己胺上的N与O3形成氢键.这说明与O1相连的T3位以及与O3相连的T1位都有可能是Al富集的位置.为了进一步验证该结论,本文还精修了吸附探针分子吡啶的样品CHA-Na-FER-Py-60h.原粉以及吸附吡啶样品的精修结果表明,T1位和T3位是样品中铝富集的位置.随后,运用相同方法研究了Py-Na-FER,PI-Na-FER,En-Na-FER和Pyrr-HF-FER样品中的Al落位,发现T1/T3位均是样品中Al富集的位置.此外,理论计算结果表明T1/T3位上Al原子的取代能较低,说明Al优先取代T1/T3位上的Si,这与精修结果相一致.前期理论模拟结果表明,FER分子筛中T2-O5和T4-O7位点的CO插入反应能垒较低,是二甲醚羰基化反应的活性位.本文吡啶吸附实验、热重分析以及PXRD精修结果表明,FER分子筛中大部分Al富集在T1/T3位,与T2/T4位相关的Br?nsted酸约占18％～30％.最后,对各样品进行了二甲醚羰基化反应评价,结果显示PI-Na-FER,Py-Na-FER,En-Na-FER和CHA-Na-FER催化剂的乙酸甲酯生成速率相近,约为0.10 mol/(mol H+?h).Pyrr-HF-FER催化剂的乙酸甲酯生成速率最高,可达到0.16 mol/(mol H+?h),这可能是由于Pyrr-HF-FER催化剂具有更多T2/T4位相关的Br?nsted酸.虽然Pyrr-HF-FER催化剂的乙酸甲酯生成速率较其他四个催化剂有一定提升,但其仍远低于MOR分子筛上乙酸甲酯生成速率(0.40 mol/(mol H+·h)).综上,有机模板剂的选择与合成介质的改变对FER分子筛中Al分布的调控作用是有限的,即Al原子总是优先分布于T1/T3位.而与T1和T3位相关的Br?nsted酸位不是二甲醚羰基化反应的活性位点.因此与MOR相比,FER分子筛在二甲醚羰基化反应中表现出较低的催化活性.     

激光剥蚀电感耦合等离子体质谱法测定纯铝及铝丝中铁、硅、铜、锰、镁、钛、锌、铬和镍

采用激光剥蚀电感耦合等离子体质谱法测定纯铝及铝丝中铁、硅、铜、锰、镁、钛、锌、铬和镍的含量。采用低功率等离子体,以27Al为内标。样品直径为0.5~3 mm时,直径粗细与元素的信号不相关。所有元素的分馏因子在0.94~1.13之间时,可以认为没有分馏效应;纯铝和铝合金的基体效应不明显,铸铝会影响基体效应。测定了块状和丝状标准物质,测定值与认定值基本吻合,纯铝板的测定值与直读光谱法测定结果相一致。受背景干扰的影响,测定值的相对标准偏差(n=5)在2.9%~32%之间。     

A centrally cracked thin circular disk, Part I: 3D Elastic–plastic finite element analysis

A full field solution, based on small deformation, three-dimensional elastic–plastic finite element analysis of the centrally cracked thin disk under mode I loading has been performed. The solution for the stresses under small-scale yielding and lo!cally fully plastic state has been compared with the HRR plane stress solution. At the outside of the 3D zone, within a distance of rσ_o/J=18, HRR dominance is maintained in the presence of a significant amount of compressive stress along the crack flanks. Ahead of this region, the HRR field overestimate the stresses. These results demonstrate a completely reversed state of stress in the near crack front compared to that in the plane strain case. The combined effect of geometry and finite thickness of the specimen on elastic–plastic crack tip stress field has been explored. To the best of our knowledge, such an attempt in the published literature has not been made yet. For the qualitative assessment of the results some of the field parameters have been compared to the available experimental results of K, gives a fair estimate of the crack opening stress near the crack front at a distance of order 10⁻² in. On the basis of this analysis, the Linear Elastic Fracture Mechanics approach has been adopted in analyzing the fatigue crack extension experiments performed in the disk (Part II).     

球形封闭容器内一个简单的煤粉燃烧爆炸模型

在分析了大量球形封闭容器内煤粉燃烧爆炸实验数据基础上，考虑了煤粉燃烧爆炸机理所涉及的湍流燃烧、相变、各种化学反应动力学过程等复杂因素，并且对球形封闭容器内由于煤粉混合不均匀造成的燃烧不充分给予了考虑，得到了球形封闭容器内煤粉燃烧爆炸特征的数值计算结果，计算的压力－时间曲线与实验结果符合较好。     

Bifurcation of flow and mass transport in a curved blood vessel

A numerical analysis of flow and concentration fields of macromolecules in a, slightly curved blood vessel was carried out. Based on these results, the effect of the bifurcation of a flow on the mass transport in a curved blood vessel was discussed. The macromolecules turned out to be easier to deposit in the inner part of the curved blood vessel near the critical Dean number. Once the Dean number is higher than the critical number, the bifurcation of the flow appears. This bifurcation can prevent macromolecules from concentrating in the inner part of the curved blood vessel. This result is helpful for understanding the possible correlations between the blood dynamics and atherosclerosis. The project supported by National Natural Science Foundation of China (10002003), JSPS Postdoctoral Fellowship for Foreign Researcher and Foundation for University Teachers, the Ministry of Education     

碳纤维缠绕铝内胆气瓶的有限元分析与自紧设计

碳纤维缠绕铝内胆气瓶应用广泛，由于贮气压力高，安全性特别重要。铝内胆外表缠绕碳纤维的气瓶的重量比金属气瓶轻很多，已从航天航空应用转向民用。这种气瓶的设计和制造，在我国，国家标准还没有公布，在国际上较多采用DOT CFFC标准。本文对气瓶进行深入的有限元分析，参考DOT CFFC标准来讨论气瓶的设计和自紧。如采用其他标准，做法是一样的。本文有限元分析采用ANSYS程序。     

螺旋焊线管局部噘嘴应力集中分析

螺旋焊缝局部噘嘴问题是复杂的三维问题，至今没有现成的安全评定公式可以利用，也难以获得纯粹的理论解。应“西气东输”工程之需，本文利用现有直焊缝理论基础，建立了该问题的力学模型，获得了应力集中因子的显式解，给制订螺旋焊线管几保缺陷的安全评定标准提供了理论基础。利用商用有限元工具ABAQUS对螺旋焊线局部噘嘴进行的系统分析显示，本文提供的理论解具有很强的预测能力。