RESEARCH ON METHOD TO CALCULATE VELOCITIES OF SOLID PHASE AND LIQUID PHASE IN DEBRIS FLOW

Velocities of solid phase and liquid phase in debris flow are one key problem to research on impact and abrasion mechanism of banks and control structures under action of debris flow. Debris flow was simplified as two-phase liquid composed of solid phase with the same diameter particles and liquid phase with the same mechanical features. Assume debris flow was one-dimension two-phase liquid moving to one direction, then general equations of velocities of solid phase and liquid phase were founded in two-phase theory. Methods to calculate average pressures, volume forces and surface forces of debris flow control volume were established. Specially, surface forces were ascertained using Bingham's rheology equation of liquid phase and Bagnold's testing results about interaction between particles of solid phase. Proportional coefficient of velocities between liquid phase and solid phase was put forward, meanwhile, divergent coefficient between theoretical velocity and real velocity of solid phase was provided too. To state succinctly before, method to calculate velocities of solid phase and liquid phase was obtained through solution to general equations. The method is suitable for both viscous debris flow and thin debris flow. Additionally, velocities every phase can be identified through analyzing deposits in-situ after occurring of debris flow. It is obvious from engineering case the result in the method is consistent to that in real-time field observation.     

混响室频率搅拌方式及其场环境特性分析

从本征模的角度阐明了频率搅拌技术的混响原理,并根据激励信号的频域特征,系统研究了频率搅拌方式下获取"实时均匀场"与"统计均匀场"的三种有效实现途径。选取线性扫频这一搅拌方式为主要研究对象,检验了混响室频率搅拌下的最低可用频率、场均匀性与统计特性三项主要技术指标。试验结果表明:线性扫频搅拌方式下,混响室的最低可用频域与机械搅拌方式基本一致;场均匀性满足IEC 61000-4-21标准规定的容差要求;场值波动规律符合理论分布模型。     

泰山经石峪缓坡石坪片状剥落风化的几何特征

针对异径管的冲蚀失效问题,以管壁腐蚀产物保护膜为研究对象,主要研究流固耦合对管道 冲蚀破坏的作用机理. 建立流固耦合数理模型,推导出在任意拉格朗日-欧拉(Arbitrary Lagrange-Euler, ALE)描述下的黏性流体N-S方程和腐蚀产物保护膜固体区域的控制方程, 分析管壁边界层多相流介质流动与腐蚀产物保护膜破损之间的耦合作用. 以异径管冲蚀失效 为例,运用多物理场耦合软件,分析了异径管流体流向、结构和规格对保护膜变形的影响, 模拟结果表明：流向为``大进小出'的冲蚀较严重;偏心异径管比同心异径管冲蚀严重;两 端管径差越大,冲蚀越严重. 可为异径管的失效分析、优化设计和在役检验提供参考.     

拜耳法干式赤泥基本特性及堆场运行特征分析

拜耳法赤泥矿物成分特殊,力学性能较差,平果铝赤泥堆场利用拜耳法赤泥筑坝在国内尚属首次。通过对拜耳法赤泥颗分情况、矿物及化学组成、物理力学特性等进行试验研究,认为赤泥中Fe2O3含量较高、粒径较细且属于级配不良的土; 结合平果铝赤泥堆场目前的运行情况,分析了赤泥堆场目前运行时存在的排水系统、赤泥固结等几个问题,指出了赤泥堆场堆存后期有可能由于赤泥排水缓慢而导致堆场底部赤泥长期被水浸泡,从而对堆场的稳定性造成一定影响。     

基于应力影响系数法的高边坡临界滑动面研究

为研究悬浮式中耳植入式助听装置中悬浮振子对中耳声传播特性的一些影响,建立了 包括绑定悬浮振子的中耳有限元模型. 该模型基于一无任何听力损伤病史的成年志愿者的 左耳,利用CT扫描和逆向成型技术建成. 模型的可靠性通过鼓膜及镫骨底板的位移计算结果 与国外文献实验测得数据进行对比加以验证. 研究结果表明:悬浮振子的绑定会显著恶化中耳 的高频传输特性;振子输出8.9\times10^5N的激振力才能激起100dB声压所 对应的激振效果;振子在砧骨长突上的绑定位置离砧镫关节越近,高频段激振效果越好.     

基于结构两相阻力分析的泥石流堆积形态研究

针对泥石流的结构两相阻力特征,采用结构两相阻力对泥石流的堆积形态进行了静力学分析,推导出在一般条件下泥石流堆积形态的公式,并讨论了在不同条件下泥石流堆积形态的特点。分析表明采用结构两相阻力对泥石流堆积形态分析可以较合理的模化阻力项,能够表现泥石流体复杂的成分结构组成,较真实的反映实际泥石流的堆积形态特征。在特定材料条件下,结构两相阻力项转化为单一材料阻力项,所得到的相应结论与已有对单一材料的分析结论一致。     

地下工程爆破对危岩稳定性的影响

根据爆破峰值速度衰减规律及危岩体主控结构面的假定,通过欧拉方程确定作用于危岩体峰值爆破荷载,并对峰值荷载进行修正得到时程爆破惯性力,建立了3类危岩体动力物理模型及计算模型,结合极限平衡方法得到3类危岩体动力稳定系数计算方法,选取最小的稳定性系数作为整个危岩体的动力稳定性系数,最终给出了3类危岩动力稳定性评价方法。以重庆市万州区太白危岩体为例,选取5个代表性危岩体进行动力稳定性计算,结果表明,3类危岩体动力稳定系数计算方法能较好地评价和反映危岩体的动力性态。     

Method to calculate fatigue fracture life of control fissure in perilous rock

Rupture and safety of perilous rock are dominated by control fissure behind perilous rock block. Based on model-Ⅰand model-Ⅱstress strength factors of control fissure under acting of weight of perilous rock, water pressure in control fissure and earthquake forces, method to calculate critical linking length of control fissure is established. Take water pressure in control fissure as a variable periodic load, and abide by P-M criterion, when control fissure is filled with water, establish the method to calculate fatigue fracture life of control fissure in critical status by contributing value of stress strength factor stemming from water pressure of control fissure in Paris's fatigue equation. Further, parameters (C and m) of sandstone with quartz and feldspar in the area of the Three Gorges Reservoir of China are obtained by fatigue fracture testing.     

强流脉冲电子束作用下纯镍表层中织构及结构缺陷的演化行为

利用强流脉冲电子束(HCPEB)装置对金属纯Ni进行轰击,采用X射线衍射及透射电子显微镜(TEM)技术详细分析了受轰击样品的变形结构和缺陷。X射线衍射分析表明,经强流脉冲电子束处理后,在{111}和{200}晶面出现了择优取向。TEM表层微观结构分析表明:强流脉冲电子束轰击1次和5次后,晶粒内部形成了大量的(111)[112]型波状条带结构,在波状条带内部包含大量平行的(200)[110]型微条带;10次轰击后,样品变形结构发生变化,除大量的条带状结构外,变形孪晶的数量明显增多。这些变形微结构不仅影响表层的织构演化行为,而且还能细化晶粒,强流脉冲电子束技术为制备表面纳米材料提供了一条有效的途径。     

4,4′-二（4-氯甲酰苯氧基）二苯砜的合成

对甲基苯基三甲硅基醚;二氯二苯砜;二（氯甲酰基苯氧基）二苯砜;合成