Single Crystal to Single Crystal (SC‐to‐SC) Transformation from a Nonporous to Porous Metal–Organic Framework and Its Application Potential in Gas Adsorption and Suzuki Coupling Reaction through Postmodification

A new amino‐functionalized strontium–carboxylate‐based metal–organic framework (MOF) has been synthesized that undergoes single crystal to single crystal (SC‐to‐SC) transformation upon desolvation. Both structures have been characterized by single‐crystal X‐ray analysis. The desolvated structure shows an interesting 3D porous structure with pendent ?NH₂ groups inside the pore wall, whereas the solvated compound possesses a nonporous structure with DMF molecules on the metal centers. The amino group was postmodified through Schiff base condensation by pyridine‐2‐carboxaldehyde and palladium was anchored on that site. The modified framework has been utilized for the Suzuki cross‐coupling reaction. The compound shows high activity towards the C?C cross‐coupling reaction with good yields and turnover frequencies. Gas adsorption studies showed that the desolvated compound had permanent porosity and was microporous in nature with a BET surface area of 2052 m² g^?1. The material also possesses good CO₂ (8 wt %) and H₂ (1.87 wt %) adsorption capabilities.     

Eu,Dy共掺杂SrAl2O4长余辉材料制备新工艺

活化Al-Sr合金粉末水解制备SrAl₂O₄长余辉材料的前驱体,并采用高温固相反应法制备出Eu,Dy共掺杂的SrAl₂O₄长余辉材料,对其微观结构和发光特性进行了研究。实验结果表明:前驱体中Al、Sr元素在微观状态下分布均匀,所制成的长余辉发光材料的发射主峰位于520nm附近,为典型的Eu²⁺离子4f5d-4f的特征发射,初始亮度达到18cd/m²,余辉时间长达46h。     

金－钼酸盐－耐尔蓝缔合显色反应的研究

在聚乙烯醇存在下，金与钼酸盐形成络阴离子，继而与耐尔蓝形成离子缔合物，其最大吸收位于５９５ｎｍ，表现摩尔吸光系数ε值为２．７１×１０￣５Ｌ．ｍｏｌ￣（－１）．ｃｍ￣（－１），线性范围０～１６μｇ／２５ｍＬＡｕ，大多数离子不干扰。用于岩矿和冶金产品中金的测定，结果满意。     

Study of the electronic and atomic structure of thermally treated SrTiO3(110) surfaces

The electronic structure of heated SrTiO₃(110) surfaces was investigated with metastable impact electron spectroscopy and ultraviolet photoelectron spectroscopy (He(I)). Scanning tunnelling microscopy and atomic force microscopy (AFM) were used to study the topology of the surface. The crystals were heated up to 1000°C under reducing conditions in ultrahigh vacuum or under oxidizing conditions in synthetic air for 1 h, respectively. Under both conditions microfacetting of the surface is observed. The experimental results are compared with ab initio Hartree–Fock calculations, also presented here, carried out for both ideal and reconstructed SrTiO₃(110) surfaces. The results give direct evidence for Ti termination of the faceted TiO₂ rows. Copyright © 2003 John Wiley & Sons, Ltd.     

丙烯选择氧化铋钼铁复氧化物催化剂组成,结构及性能的研究

采用XRD、Raman、XPS及催化剂性能评价等手段,考察了Bi_3(FeO_4)(MoO_4)_2和Fe_2(MoO_4)_3分别存在及两者共存时对Bi-Mo复氧化物体系催化性能的影响.结果表明,这两种含Fe物种的存在都有助于改善Bi-Mo系复氧化物催化剂对丙烯选择氧化反应的催化性能.但两者在作用机理上有所不同.Fe_2(MoO_4)_3本身无催化活性,但在反应条件下可部分还原为FeMoO_4形成Fe~(3+)/Fe~(2+)氧化还原对;且其地结构上与α-Bi_2(MoO_4)_3相匹配,这些因素都有助于促进催化体系中电子和氧物种的传递及催化剂表面活性中心的再生,从而提高催化性能.Bi_3(FeO_4)(MoO_4)_2在反应条件下也可形成Fe~(3+)/Fe~(2+)氧化还原对,但由于其Fe~(3-)所处的化学环境与Fe_2(MoO_4)_3很不相同,且Fe的含量也不及Fe_2(MoO_4)_3,因此它在促进催化体系中电子和氧物种的传递及催化剂表面活性中心的再生等方面的性能较差,但它对提高催化剂表面的活性中心(Bi-Mo对)数目有贡献.     

Structure-property modelling of complex formation of strontium with organic ligands in water

The method of substructural molecular fragments based on representation of the molecular graph by ensembles of fragments and involving calculations of those contributions to the given property is applied to the modelling of stability constants of the complexes of strontium(II) with organic ligands in water. Reliability of predictions of developed structure-property models was examined using three different test sets of structurally diverse ligands. The obtained models have been used for generation and screening of combinatorial library of virtual ligands. Some hypothetical efficient Sr(II) binders were suggested.     

钙钛矿型复合氧化物Ca_xSr_（1－x）TiO_3催化剂上的甲烷氧化偶联反应

在固定床反应器上，评价了不同温度下钙钛矿型复合氧化物ＳｒＴｉＯ３和ＣａＴｉＯ３的组成变化对甲烷氧化偶联反应的影响．同时，利用ＸＰＳ和ＣＯ２－ＴＰＤ对催化剂的结构及其氧物种的反应特性进行了表征．结果表明：ＳｒＴｉＯ３和少量Ｃａ掺杂的ＣａｘＳｒｌ－ｘＴｉＯ３有利于在较低温度（９２３Ｋ）下催化反应的活性和选择性，而ＣａＴｉＯ３体系则在高温（１０７３Ｋ）下表现出较好的活性和选择性．钙钛矿型复合氧化物ＳｒＴｉＯ３和ＣａＴｉＯ３组成变化对不同温度下反应活性的影响与ＣＯ２－ＴＰＤ的脱附谱图有很好的平行关系．     

甲烷在SrO-La2O3/CaO催化剂上的氧化偶联Ⅱ.反应动力学的研究

在２０％Ｌａ２Ｏ３／ＣａＯ（ＬＣ）催化剂中添加ＳｒＯ（添加ＳｒＯ的ＬＣ以ＳＬＣ表示）明显地提高了反应活性和Ｃ２选择性。反应动力学研究表明，ＬＣ和ＳＬＣ催化剂在甲烷氧化偶联反应中，在表观活化能和表观反应级数上存在很大的差异。ＬＣ催化剂在ＣＨ４转化以及Ｃ２和ＣＯｘ形成过程中，表观活化能大于ＳＬＣ催化剂，而ＳＬＣ催化剂的指前因子小于ＬＣ体系，两者存在着补偿形象。ＳＬＣ催化剂的反应速率常数比ｋｃ２／ｋＣＨ     

氧化锶催化性质：Ⅱ.SrO,MgO上异丙醇的分解反应

ＳｒＯ，ＭｓＯ对异丙醇的分解反应有各自的作用形式，因而产物分布也有明显差别．ＭｇＯ上异丙醇分解，在较低温度时，主要产物为丙酮和丙烯；随温度升高，生成丙烯的量增加，而丙酮的量减少，直至消失，在ＳｒＯ上，异丙醇在较高温度时反应，产物几乎为丙酮，丙烯的生成量极少。认为：产物中丙烯来源于异丙醇在催化剂表面强酸中心上的脱水；丙酮在ＭｇＯ上来源于强碱中心和酸中心协同作用异丙醇的脱氢，而在ＳｒＯ上则是ＳｒＯ表面极强的碱中心作用异丙醇而脱氢制得。     

Seeding and the Non-Hydrolytic Sol-Gel Synthesis of ZrW2O8 and ZrMo2O8

The unseeded non-hydrolytic sol-gel synthesis of ZrW₂O₈ and ZrMo₂O₈ produces trigonal ZrM₂O₈ (M = W, Mo) at 740 and 300–400°C, respectively. Cubic ZrW₂O₈ can be prepared using non-hydrolytic sol-gel methods by seeding with small amounts of preprepared cubic material, and the formation of the trigonal polymorph can be suppressed completely. Seeds with a small particle size are necessary for the preparation of cubic ZrW₂O₈. In contrast, seeding of ZrMo₂O₈ gels with either cubic ZrMo₂O₈ or cubic ZrW₂O₈ only lowers the temperature at which the trigonal phase crystallizes.