Fabrication of Zeolite A Rods with Irregular Macropores by Self-assembly of Zeolite A Microcrystals Using Microwave-assisted Hydrothermal Synthesis

Zeolite A rods by self-assembly of zeolite A microcrystal were successfully synthesized by microwave-assisted hydrotherrnal synthesis. The average size of zeolite crystals consisting of self-assembling materials was about 300 nm and the length of zeolite rods was in the range of 15--30μm.     

用转移矩阵法数值研究二维正方介质柱光子晶体的传输特性

利用转移矩阵方法对二维正方介质柱光子晶体的传输特性进行了研究,数值计算研究了不同晶格、同一晶格柱体截面面积不同、放置方位角不同时光子晶体的传输特性。数值结果表明光子禁带的宽度与中心频率和晶格结构有很大关系,正方晶格更易形成平坦光子禁带,柱体截面面积大,则形成的禁带较宽,在其他因素相同的条件下柱体放置的方位角对光子禁带有重要影响。数值研究表明在正方介质柱下设计宽平坦光子禁带时,可以首先考虑正方晶格结构,其次设法使柱体截面尽量大一些,最后可通过柱体放置方位角来微调光子禁带的宽度与中心频率以达到设计要求。     

Asymptotic analysis of elastic curved rods

We consider a sequence of curved rods which consist of isotropic material and which are clamped on the lower base or on both bases. We study the asymptotic behaviour of the stress tensor and displacement under the assumptions of linearized elasticity when the cross‐sectional diameter of the rods tends to zero and the body force is given in the particular form. The analysis covers the case of a non‐smooth limit line of centroids. We show how the body force and the choice of the approximating curved rods can affect the strong convergence and the limit form of the stress tensor for the curved rods clamped on both bases. Copyright © 2006 John Wiley & Sons, Ltd.     

强流RFQ的稳定性设计研究

对强流RFQ耦合间隙的确定、二极模稳定杆的设计进行了详细的研究和讨论.利用现有的RFQ冷模,进行了本征模频率的测量、场分布的调试和测量、二极模稳定杆的试验.并通过与模拟结果的比较,验证了模拟程序在RFQ腔体设计中的可靠性.同时,对影响RFQ稳定性设计的物理进行了有益的探讨.     

An orthotropic plate model for decks of suspension bridges

The main purpose of the present paper is to compare two different kinds of approaches in modeling the deck of a suspension bridge: in the first approach we look at the deck as a rectangular plate and in the second one we look at the deck as a beam for vertical deflections and as a rod for torsional deformations. Throughout this paper we will refer to the model corresponding to the second approach as the beam-rod model. In our discussion, we observe that the beam-rod model contains a larger number of elastic parameters if compared with the isotropic plate model. For this reason the beam-rod model is supposed to be more appropriate to describe the behavior of the deck of a real suspension bridge. A possible strategy to make the plate model more efficient could be to relax the isotropy condition with a more general condition of orthotropy, which is expected to increase the number of elastic parameters. In this new setting, a comparison between the two approaches becomes now possible.Basic results are proved for the suggested problem, from existence and uniqueness of solutions to spectral properties. We suggest realistic values for the elastic parameters thus obtaining with both approaches similar responses in the static and dynamic behavior of the deck. This can be considered as a preliminary article since many work has still to be done with the perspective of formulating models for a complete suspension bridge which take into account not only the deck but also the action on it of cables and hangers. With this perspective, a section is devoted to possible future developments.     

One-dimensional rigorous hole theory of fluids: Internally constrained ensembles

A hole in a fluid is specified in a well-defined manner. The concentration of holes is a thermodynamic property of the fluid and we derive this concentration in three different ensembles for a one-dimensional fluid of hard rods. The thermodynamics of these rigorously defined holes is developed, and the properties of holes are explored. The ensemble in which the concentration of holes is maintained fixed exhibits dramatic properties. Finally, pair correlation functions for hard rods in the various ensembles are computed. Contrary to a frequently made assumption, the equilibrium number of holes is found to never be proportional to the probability of finding a single hole in the fluid. Constraining the concentration of holes as well as the density leads to dramatic structural effects prominently displayed by the pair correlation function. The ensemble in which the concentration of holes is fixed is an example of an internally constrained metastable system.     

Synthesis,Structure, and Optical Properties of Terminally Sulfur‐Functionalized Core‐Substituted Naphthalene‐Bisimide Dyes

The synthesis, characterization, and optical properties of a series of new 2,6‐disubstituted naphthalene‐bisimide dyes as molecular rods comprising terminal AcS groups is reported. The first series of dyes ( 1 – 3 ), comprising phenylhetero (Ph‐X) core substituents, cover a broad range of the VIS spectrum, ranging from yellow ( 2 ) over red ( 3 ) to blue ( 1 ). The second series of dyes contains benzylhetero (Bn‐X) core substituents ( 4 – 7 ). For the same heteroatom connecting the substituent to the naphthalene core, both series were found to display comparable colors. For the second series, the colors were blue ( 4 ), red ( 5 ), and violet ( 6, 7 ). The Ph‐X‐substituted dyes 1 – 3 are nonfluorescent, in contrast to the Bn‐X‐substituted compounds 4 – 7 . This rich variety of optical features that can be adjusted by rather small alterations of the core substituents makes these structurally very comparable molecular rods ideal candidates for optically triggered molecular‐transport investigations. Also, thanks to the terminal AcS groups, these compounds can be placed between nobel‐metal electrodes for optically triggered transport experiments.     

Synthesis and Spectroscopic Characterization of Fluorophore‐Labeled Oligospiroketal Rods

Fluorescence probes consisting of well‐established fluorophores in combination with rigid molecular rods based on spirane‐type structures were investigated with respect to their fluorescence properties under different solvent conditions. The attachment of the dyes was accomplished by 1,3‐dipolar cycloaddition between alkynes and azides (‘click’ reaction) and is a prime example for a novel class of sensor constructs. Especially, the attachment of two (different) fluorophores on opposite sides of the molecular rods paves the way to new sensor systems with less bulky (compared to the conventional DNA‐ or protein‐based concepts), nevertheless rigid spacer constructs, e.g., for FRET‐based sensing applications. A detailed photophysical characterization was performed in MeOH (and in basic H₂O/MeOH mixtures) for i) rod constructs containing carboxyfluorescein, ii) rod constructs containing carboxyrhodamine, iii) rod constructs containing both carboxyfluorescein and carboxyrhodamine, and iv) rod constructs containing both pyrene and perylene parts. For each dye (pair), two rod lengths with different numbers of spirane units were synthesized and investigated. The rod constructs were characterized in ensemble as well as single‐molecule fluorescence experiments with respect to i) specific rod? dye and ii) dye? dye interactions. In addition to MeOH and MeOH/NaOH, the rod constructs were also investigated in micellar systems, which were chosen as a simplified model for membranes.     

Recent advances in surface x-ray diffraction and the potential for determining structure-sensitivity relations in single-crystal electrocatalysis

Determining how electrode structure governs the performance of an electrocatalyst requires techniques capable of probing structure at the atomic scale, often in situ and operando. In recent years, there have been numerous advances in the main experimental techniques for determining the structure of the electrochemical interface. In situ/operando synchrotron surface x-ray diffraction measurements are key to investigate the atomic structure of the electrode surfaces as well as understand the structure-reactivity relations in electrocatalysis. Here we discuss some recent improvements that have taken place in surface x-ray diffraction and how we expect them to lead to an enhanced understanding of electrocatalysis.