Mid-infrared generation based on a periodically poled LiNbO3 optical parametric oscillator

We report a nanosecond Nd:YVO_4-pumped optical parametric oscillator (OPO) based on periodically poled LiNbO_3 (PPLN). Tuning is achieved in this experiment by varying the temperature and period of the PPLN. The design of double-pass singly resonant oscillator (DSRO) and confocal cavity enables the OPO threshold to be lowered considerably, resulting in a simple, compact, all-solid-state configuration with the mid-infrared idler powers of up to 466mW at 3.41μm.     

Proton-exchanged optical waveguides fabricated by glutaric acid

In this paper, we first report that a new proton source, glutaric acid, has been used to fabricate optical waveguides in Z-cut lithium niobate crystals. The relationship was experimentally established between proton-exchanged (PE) waveguide parameters and fabrication conditions. It is shown that this new organic acid can be used to obtain deep PE waveguides in fast diffusion speed (0.275 μm²/h at 221°C) and with low loss (0.2 dB/cm). It provides an alternative approach for fabricating PE waveguides in lithium niobate substrate.     

Low-threshold, high-efficiency, high-repetition-rate optical parametric generator based on periodically poled LiNbO3

We report a high-repetition-rate optical parametric generator (OPG) with a periodically poled lithium niobate (PPLN) crystal pumped by an acousto-optically Q-switched CW-diode-end-pumped Nd:YVO_4 laser. For the maximum 1064nm pump power of 970mW, the maximum conversion efficiency is 32.9% under the conditions of 250℃, 1064nm pulse repetition rate of 22.6kHz and pulse width of 12ns, and the PPLN OPG threshold in the collinear case is less than 23.7μJ. The output power increases with the increase of the crystal temperature. The 1485－1553nm signal wave and 3383－3754nm idler wave are obtained by changing the temperature and the angle of the PPLN crystal.     

Microscopically structural studies of lithium niobate powders

On the basis of the crystallographic characteristics of lithium niobate (LN) crystals, Law of Bravais and Pauling's third rule (i.e. Polyhedral Sharing Rule) are employed with the aim to find the relationship between the crystal structure and morphological faces of LN powders. In order to validate our analytical results, we have successfully synthesized LN powders and measured the corresponding X-ray powder diffraction. Our results show that the structural analysis is consistent with the experimental data and is helpful and effective for us to control the single-crystal growth and to design superstructures at the specific plane, starting from the viewpoint of the microscopic behaviors of constituent chemical bonds and polyhedra in the crystallographic frame.     

新铌酸盐Ba5NdTi3Nb7O30的合成与介电性能

The New Niobate Ba₅NdTi₃Nb₇O₃₀ was synthesized by solid state reaction at 1250℃ for 48h. The crystal structure and dielectric properties of Ba₅NdTi₃Nb₇O₃₀ were determined by X-ray powder diffraction and dielectric measurements. The results show that Ba₅NdTi₃Nb₇O₃₀ belongs to ferroelectric phase of tetragonal tungsten bronze structure at room temperature with unit cell parameters: a=1.24424(4)nm, c=0.39476(2)nm, calculated density 5.719g·cm^-3. Ba₅NdTi₃Nb₇O₃₀ belongs to relaxor ferroelectrics. The phase transition temperature (T_c) of Ba₅NdTi₃Nb₇O₃₀ from ferroelectric to paraelectric is found to shift toward higher temperature side at higher fre-quency, and T_c is 90℃ at 1kHz. At room temperature, the dielectric constant (ε_r) and dielectric loss of Ba₅NdTi₃Nb₇O₃₀ decrease with the increase of frequency, and Ba₅NdTi₃Nb₇O₃₀ ceramic have high dielectric constant 489 at 1kHz.     

Synthesis of Ultra-Fine Columbite Powder MgNb2O6 by the Polymerized Complex Method

Pure MgNb₂O₆ powders with high specific surface area and high crystallinity have been successfully synthesized by the Polymerized Complex (PC) Method. A solution of water, citric acid, ethylene glycol and niobium and magnesium ions, was polymerized at 130°C by the water elimination and was calcined at 400°C for 2 h. The precursor formed was calcined at temperatures from 700°C to 1000°C in air to obtain the columbite phase. Thermal analysis, Raman spectroscopy, x-ray diffraction, adsorption/desorption hysteresis and scanning electron microscopy were used to investigate the polymer decomposition and the columbite phase evolution. No evidence for phase separation of crystalline MgCO₃ and Nb₂O₅ in Raman spectra and x-ray diffraction pattern as distinct intermediates were found, and the MgNb₂O₆ probably is formed through a single-step decomposition of oxycarbonate intermediate, as other double oxide synthesized by the PC Method, as indicated by the thermal decomposition of the precursor.     

铌酸锂晶体性能的组成依赖性(英文)

总结了铌酸锂晶体的各项性能指标,显示了其对晶体实际组成的强烈依赖性.利用化学键模型定量地解释了这种依赖性产生的根源,从而说明了制约该晶体性能提高的关键因素是晶体结构中的缺陷控制.     

胍盐化合物[C(NH_2)_3]_(6.3)K[Nb_(1.3)W_(10.7)O_(40)H_2]·H_2O的合成及性质

通过粉状白钨酸和可溶性铌酸钾水溶液的反应,合成了十二聚系列的钨铌杂多阴离子胍盐化合物[C(NH_2)_3]_(6.3)K[Nb_(1.3)W_(10.7)O_(40)H_2]·H_2O,研究了其水溶液的酸碱稳定性。根据红外、拉曼和紫外光谱、化学性质,认为该化合物可能具有十二聚偏钨酸根阴离子的结构骨架。     

Processing and characterization of Pb(Mg,Nb)O3-PbTiO3 thin films from metal alkoxide-derived gels

The sol-gel processing is one of promising methods to fabricate well-derived integrated thin films at relatively low temperature. Ferroelectric niobates films do afford the possibilities for adding the values by the hybridization with semiconductor and/or electro-optic systems. The molecular level designing of the precursor solution was stressed as well as the control of key processing factors. The advantages of this sol-gel have been extended to prepare the ferroelectric Pb(Mg, Nb)O₃-PbTiO₃ solid solution films integrated on Si wafers. The crystallization of the films with desired crystal structure could be promoted by the controlled partial hydrolysis of designed alkoxide solution in the intermediate state and the pre-heated treatment of alkoxide-derived films in flow of water vapor and oxygen gas mixture.     

Synthesis and Structure of Ba[ZrN2] and Ba2[NbN3]

Ba₃N₂ reacts at 950°C under pure N₂ with Zr to yield dark red, air-sensitive Ba[ZrN₂]. This new compound crystallizes in the tetragonal space group P4/nmm with a = 416.10(2), c = 839.2(1) pm and Z = 2. The crystal structure was solved and refined using X-ray and neutron powder diffraction data. In the nitrido zirconate [ZrN₂]^2? the Zr atoms exhibit a square-pyramidal coordination by five N atoms at distances of 201(3) and 220.2(2) pm. The pyramids share all the edges in the basal plane to form layers parallel to (001) with their apices alternately pointing up and down. The Ba²⁺ cations are integrated into these layers at the levels of the pyramidal apices. The structure can be interpreted as a stuffed PbFCl type. Ba₂[NbN₃] is formed by the reaction of Ba₃N₂ and NbN or of Ba and Nb at 1 000°C under N₂. Isostructural to Ba₂[TaN₃] it crystallizes in the monoclinic space group C2/c with a = 613.2(3), b = 1 176.8(3), c = 1 322.9(4) pm, β = 91.65(2)°, Z = 8. The nitrido niobate anions form chains of corner sharing NbN₄ tetrahedra with distances Nb? N between 188(1) and 199.9(9) pm.