Development of an improved divergence‐free‐condition compensated coupled framework to solve flow problems with time‐varying geometries

In this article a coupled version of the improved divergence‐free‐condition compensated method will be proposed to simulate time‐varying geometries by direct forcing immersed boundary method. The proposed method can be seen as a quasi‐multi‐moment framework due to the fact that the momentum equations are discretized by both cell‐centered and cell‐face velocity. For simulating time‐varying geometries, a semi‐implicit iterative method is proposed for calculating the direct forcing terms. Treatments for suppressing spurious force oscillations, calculating drag/lift forces, and evaluating velocity and pressure for freshly cells will also be addressed. In order to show the applicability and accuracy, analytical as well as benchmark problems will be investigated by the present framework and compared with other numerical and experimental results.     

Determination of sulfa antibiotic residues in river and particulate matter by field-amplified sample injection-capillary zone electrophoresis

In the present research, field-amplified sample injection–CZE (FASI–CZE) coupled with a diode array detector was established to determine trace level sulfa antibiotic. Sulfathiazole, sulfadiazine, sulfamethazine, sulfadimethoxine, sulfamethoxazole, and sulfisoxazole were selected as analytes for the experiments. The background electrolyte solution consisted of 70.0 mmol/L borax and 60.0 mmol/L boric acid (including 10% methanol, pH 9.1). The plug was 2.5 mmol/L borax, which was injected into the capillary at a pressure of 0.5 psi for 5 s. Then the sample was injected into the capillary at an injection voltage of –10 kV for 20 s. The electrophoretic separation was carried out under a voltage of +19 kV. The capillary temperature was maintained at 20˚C throughout the analysis, and six sulfonamides were completely separated within 35 min. Compared with pressure injection-CZE, the sensitivity of FASI-CZE was increased by 6.25–10.0 times, and the LODs were reduced from 0.2–0.5 to 0.02–0.05 μg/mL. The method was applied to the determination of sulfonamides in river water and particulate matter samples. The recoveries were 78.59–106.59%. The intraday and interday precisions were 2.89–7.35% and 2.77–7.09%, respectively. This provides a simpler and faster method for the analysis of sulfa antibiotic residues in environmental samples.     

Trends in the detection of pharmaceuticals and endocrine-disrupting compounds by Field-Effect Transistors (FETs)

Field-effect transistors (FETs) are one of the most widely-used electronic sensors for continuous monitoring and detection of contaminants such as pharmaceuticals and endocrine-disrupting compounds at low concentrations. FETs have been successfully utilized for the rapid analysis of these environmental pollutants due to their advantageous material properties like the disposability, rapid responses and simplicity. This paper presented an up-to-date overview of applied strategies with different bio-based materials in order to enhance the analytical performances of the designed sensors. Comparison and discussion were made between characteristics of recently engineered FET bio-sensors used for the detection of famous and selected pharmaceutical compounds in the literature. The recent progress in environmental research applications, comments on interesting trends, current challenge for future research in endocrine-disrupting chemicals’ (EDCs) detection using FETs biosensors were highlighted.     

Wound Healing Attributes of Polyelectrolyte Multilayers Prepared with Multi‐l‐arginyl‐poly‐l‐aspartate Pairing with Hyaluronic Acid and γ‐Polyglutamic Acid

Biodegradable multi‐l ‐arginyl‐poly‐l ‐aspartate (MAPA), more commonly cyanophycin, prepared with recombinant Escherichia coli contains a polyaspartate backbone with lysine and arginine as side chains. Two assemblies of polyelectrolyte multilayers (PEMs) are fabricated at three different concentration ratios of insoluble MAPA (iMAPA) with hyaluronic acid (iMAPA/HA) and with γ‐polyglutamic acid (iMAPA/γ‐PGA), respectively, utilizing a layer‐by‐layer approach. Both films with iMAPA and its counterpart, HA or γ‐PGA, as the terminal layer are prepared to assess the effect on film roughness, cell growth, and cell migration. iMAPA incorporation is higher for a higher concentration of the anionic polymer due to better charge interaction. The iMAPA/HA films when compared to iMAPA/γ‐PGA multilayers show least roughness. The growth rates of L929 fibroblast cells on the PEMs are similar to those on glass substrate, with no supplementary effect of the terminal layer. However, the migration rates of L929 cells increase for all PEMs. γ‐PGA incorporated films impart 50% enhancement to the cell migration after 12 h of culture as compared to the untreated glass, and the smooth films containing HA display a maximum 82% improvement. The results present the use of iMAPA to construct a new layer‐by‐layer system of polyelectrolyte biopolymers with a potential application in wound dressing.     

Method validation,residue analysis and dietary risk assessment of trifloxystrobin and trifloxystrobin acid in milk,eggs and pork

Trifloxystrobin (TFS) is a widely used strobilurin fungicide and its residues accumulating in animal-derived food could result in potential harm to consumers. By optimization of extraction solvents and cleanup sorbents, a residue analysis method for TFS and its metabolite trifloxystrobin acid (TFSA) was established in milk, eggs and pork based on QuEChERS sample preparation and LC–MS/MS. The calibration curves exhibited good linearity with determination coefficients (R²) >0.9930 over the range of 0.5–250 ng/ml for both TFS and TFSA. The recoveries of the two analytes were 81–100% with RSD 3–10% and 76–96% with RSD 2–13%, respectively. The limit of quantification (LOQ) was 1 ng/g for both analytes. The milk, egg and pork samples, 30 each, were collected from the 30 main producing regions in China, and residues of TFS and TFSA were analyzed. The concentrations of both analytes were lower than the corresponding LOQs and maximum residue limits. Long-term dietary risk assessment showed that the hazard quotients were 0.001–0.003%, indicating an absence of unacceptable risks in milk, eggs and pork to the health of common consumers in China.     

Universal power law behavior of the AC conductivity versus frequency of agglomerate morphologies in conductive carbon nanotube‐reinforced epoxy networks

The Jonscher universal power law for ac conductivity versus frequency (f = ω/2π) in the dispersion region was tested for a multiwall carbon nanotube/epoxy nanocomposite. The effect of changes in agglomerate morphology on the fitting parameters A and n in the equation σ_{ac =} Aωⁿ was investigated. Changing nanotube agglomerate morphology was tracked by optical microscopy through curing. Evolving morphology was compared alongside ac conductivity obtained via a broadband dielectric spectrometer to elucidate possible physical meaning of the universal power law in the context of this system. The ?logA/n was unaffected by changes in agglomerate morphology affected during cure, yet connected with each other in their dependence on temperature. For this system, the relationship between the fitting parameters in the universal dynamic response equation remains empirical at this stage with regard to biphasic “texture” or morphology within such a network. Electrical conductivity σ versus frequency ω for a composite consisting of agglomerated multiwalled carbon nanotubes dispersed throughout a cured epoxy matrix was discovered to follow the empirical universal dynamic response equation of Jonscher. The frequency behavior of the exponent n is discussed in terms of underlying morphology throughout which charge carriers migrate. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1918–1923     

Characterizing the protonation states of the catalytic residues in apo and substrate-bound human T-cell leukemia virus type 1 protease

Human T-cell leukemia virus type 1 (HTLV-1) protease is an attractive target when developing inhibitors to treat HTLV-1 associated diseases. To study the catalytic mechanism and design novel HTLV-1 protease inhibitors, the protonation states of the two catalytic aspartic acid residues must be determined. Free energy simulations have been conducted to study the proton transfer reaction between the catalytic residues of HTLV-1 protease using a combined quantum mechanical and molecular mechanical (QM/MM) molecular dynamics simulation. The free energy profiles for the reaction in the apo-enzyme and in an enzyme – substrate complex have been obtained. In the apo-enzyme, the two catalytic residues are chemically equivalent and are expected to be both unprotonated. Upon substrate binding, the catalytic residues of HTLV-1 protease evolve to a singly protonated state, in which the OD1 of Asp32 is protonated and forms a hydrogen bond with the OD1 of Asp32′, which is unprotonated. The HTLV-1 protease–substrate complex structure obtained from this simulation can serve as the Michaelis complex structure for further mechanistic studies of HTLV-1 protease while providing a receptor structure with the correct protonation states for the active site residues toward the design of novel HTLV-1 protease inhibitors through virtual screening.     

Ionic‐liquid‐based,manual‐shaking‐ and ultrasound‐assisted,surfactant‐enhanced emulsification microextraction for the determination of three fungicide residues in juice samples

A novel manual‐shaking‐ and ultrasound‐assisted surfactant‐enhanced emulsification microextraction method was developed for the determination of three fungicides in juice samples. In this method, the ionic liquid, 1‐ethyl‐3‐methylimidazolium bis[(trifluoromethyl)sulfonyl]imide, instead of a volatile organic solvent was used as the extraction solvent. The surfactant, NP‐10, was used as an emulsifier to enhance the dispersion of the water‐immiscible ionic liquid into an aqueous phase, which accelerated the mass transfer of the analytes. Organic dispersive solvent typically required in common dispersive liquid–liquid microextraction methods was not necessary. In addition, manual shaking for 15 s before ultrasound to preliminarily mix the extraction solvent and the aqueous sample could greatly shorten the time for dispersing the ionic liquid into aqueous solution by ultrasound irradiation. Several experimental parameters affecting the extraction efficiency, including type and volume of extraction solvent, type and concentration of surfactant, extraction time, and pH, were optimized. Under the optimized conditions, good linearity with the correlation coefficients (γ) higher than 0.9986 and high sensitivity with the limit of detection ranging from 0.4 to 1.6 μg/L were obtained. The average recoveries ranged from 61.4 to 86.0% for spiked juice, with relative standard deviations from 1.8 to 9.7%. The proposed method was demonstrated to be a simple, fast, and efficient method for the analysis of the target fungicides in juice samples.     

Study of acidified ignitable liquid residues in fire debris by solid‐phase microextraction with gas chromatography and mass spectrometry

The detection and identification of ignitable liquid residues in fire debris can be meaningful in fire investigations. However, background pyrolysis products and weathering hinder the identification and classification steps. In addition to those processes, the acidification of the ignitable liquids before the combustion process could make those tasks even more difficult. Nevertheless, there are no systematic studies assessing the extraction, analysis, and composition of acidified ignitable liquid residues obtained from fire debris. In this work, a method for the study of acidified ignitable liquid residues in fire debris by solid‐phase microextraction with gas chromatography and mass spectrometry is proposed. This methodology has been evaluated, first with simulated solutions (gasoline/sulfuric acid mixtures set on fire under controlled conditions), and then with analysis of samples from real fire debris obtained from 18 chemical ignition Molotov cocktails made with sulfuric acid and three different ignitable liquids (two types of gasoline and diesel fuel). In addition, the extensive modifications observed in chromatograms of acidified ignitable liquid residues regarding neat and weathered samples were studied. These alterations were produced by the combustion and acidification processes. As a consequence, tert‐butylated compounds are proposed as diagnostic indicators for the identification of acidified gasoline in fire debris, even in strongly weathered samples.