Propylphosphonic anhydride(T3P~) catalyzed one-pot synthesis of α-aminonitriles

The Strecker reaction was performed via a one-pot three component condensation of hetero aromatic/aromatic aldehydes, secondary amines and trimetylsilyl cyanide in the presence of propylphosphonic anhydride(T3P~) to accomplish the corresponding a-aminonitriles. The main advantages of this method are very short reaction time and excellent yields.     

Analyses of reaction rate data for the simple hydrolysis of acetic anhydride in the acetonitrile/water and acetone/water cosolvent systems using recently developed thermodynamic rate equations

This article presents reaction rate data for the simple hydrolysis of acetic anhydride in the acetonitrile/water and acetone/water cosolvent systems and regression analyses using recently developed thermodynamic rate equations that contain electrostatic and solvent-solute terms. The isomole fraction plots for these reaction systems are linear, and previous theoretical work has shown that the electrostatic term is negligible for such systems. On the other hand, the reaction rates are dependent upon the cosolvent mole fraction, indicating that the solvent-solute term, which is modeled empirically, is significant. The results of the analyses provide the foundation for a paradigm shift away from the emphasis on electrostatic effects to more tenable explanations of kinetic behavior in solvent systems.     

Preparation of an efficient catalyst through injection of CuI on modified poly (styrene-co-maleic anhydride) and theoretical investigation of the structural and electronic properties of catalyst

A novel polymer supported [poly (styrene-co-maleic imide) (SMI)]Cu(I) nano-particles was prepared via in situ reaction of 4-amino-5-methyl-4H-1,2,4-triazole-3-thione with [poly (styrene-co-maleic anhydride)] (SMA) along with immobilization of CuI. These nano-particles were fully characterized by using scanning electron microscopy (SEM), energy dispersive spectroscopy analysis, Xray (EDAX), inductively coupled plasma (ICP) analysis, ¹H NMR and FT-IR techniques. Moreover, the structural and electronic features of metal–ligand interactions in the complex model of polymer-supported copper nanocatalyst were assessed using density functional theory calculations. The catalytic activity of these supported Cu(I) nonoparticles was examined in one of the classiest name reaction so–called “click reaction” which is coined K. B Sharpless for the regioselective synthesis of 1,2,3-triazole derivatives using a multicomponent reaction (MCR) involving benzyl halides, sodium azide and terminal alkynes in water as a green solvent. This heterogeneous catalyst showed excellent catalytic activity and was separated by simple filtration and was used at least in five consecutive runs without a significant decrease in its activity.     

Chemical profiling of Ziziphi spinosae semen using on-line comprehensive two-dimensional liquid chromatography-mass spectrometry based on a novel phthalic anhydride bonded stationary phase

Ziziphi spinosae semen has been widely used to treat insomnia and anxiety. To profile its chemical components, an online comprehensive two-dimensional liquid chromatography-mass spectrometry was developed. In this two-dimensional liquid chromatography system, a novel phthalic anhydride-bonded stationary phase column was combined with a C18 column. As a result, this new stationary phase exhibited remarkable differences in separation selectivity from C18, achieving a good orthogonality of 83.3%. Moreover, this new stationary phase with weaker hydrophobicity than C18 realized solvent compatibility in the online configuration. Coupled with tandem MS, 154 compounds were identified, including 51 unreported compounds. Compared with one-dimensional liquid chromatography-mass spectrometry, this online two-dimensional liquid chromatography-mass spectrometry system exhibited a much higher resolving power in isomer separation. This work provided an effective separation and characterization method for the material basis of Ziziphi spinosae semen. This strategy provides ideas for the material basis research of other traditional Chinese medicines.     

Synthesis,characterization and biological activity evaluation of new 3- methyl and 4- fluoro isoindoline-1, 3-dione/phthalimide analogues

The convenient route for the synthesis of a series of new Isoindoline-1, 3-dione/phthalimide analogues by condensation of substituted phthalic anhydride with an appropriate Ar-amine is described. Selective phthalimide derivatives were evaluated for their preliminary biological activities against Gram-positive, Gram-negative and fungi strains. These encouraging results could be helpful for the development of new antibacterial or antifungal agents.     

Two-Step Derivatization of Amino Acids for Stable-Isotope Dilution GC–MS Analysis: Long-Term Stability of Methyl Ester-Pentafluoropropionic Derivatives in Toluene Extracts

Analysis of amino acids by gas chromatography-mass spectrometry (GC–MS) requires at least one derivatization step to enable solubility in GC–MS-compatible water-immiscible organic solvents such as toluene, to make them volatile to introduce into the gas chromatograph and thermally stable enough for separation in the GC column and introduction into the ion-source, and finally to increase their ionization by increasing their electronegativity using F-rich reagents. In this work we investigated the long-term stability of the methyl esters pentafluoropropionic (Me-PFP) derivatives of 21 urinary amino acids prepared by a two-step derivatization procedure and extraction by toluene. In situ prepared trideuteromethyl ester pentafluoropropionic derivatives were used as internal standards. GC–MS analysis (injection of 1 µL aliquots and quantification by selected-ion monitoring of specific mass fragments) was performed on days 1, 2, 8, and 15. Measured peak areas and calculated peak area ratios were used to evaluate the stability of the derivatives of endogenous amino acids and their internal standards, as well as the precision and the accuracy of the method. All analyses were performed under routine conditions. Me-PFP derivatives of endogenous amino acids and their stable-isotope labelled analogs were stable in toluene for 14 days. The peak area values of the derivatives of most amino acids and their internal standards were slightly higher on days 8 and 15 compared to days 1 and 2, yet the peak area ratio values of endogenous amino acids to their internal standards did not change. Our study indicates that Me-PFP derivatives of amino acids from human urine samples can easily be prepared, are stable at least for 14 days in the extraction solvent toluene, and allow for precise and accurate quantitative measurements by GC–MS using in situ prepared deuterium-labelled methyl ester as internal standard.     

基于石墨烯的毒死蜱分子印迹电化学传感器的制备及对毒死蜱的测定

利用分子印迹技术,以马来松香丙烯酸乙二醇酯为交联剂,使用自由基热聚合法在石墨烯修饰的玻碳电极表面合成毒死蜱( CPF)分子印迹聚合膜,制得了CPF分子印迹电化学传感器。采用循环伏安法、线性扫描伏安法和电化学交流阻抗法等,考察了此CPF分子印迹膜的电化学性能。在最佳检测条件下,传感器的峰电流与CPF浓度在2.0×10-7~1.0×10-5mol/L范围内呈线性关系,线性方程为Ip(μA)=-7.1834-0.2424C (μmol/L),相关系数r2=0.9959,检出限为6.7×10-8 mol/L(S/N=3)。构建了CPF分子印迹电化学传感器的动力学吸附模型,测得印迹传感器的印迹因子β=2.59,结合速率常数k=12.2324 s。传感器表现出良好的重现性和稳定性,并成功用于实际水样和蔬菜样品中CPF的测定,加标回收率为94.1%~101.4%。     

二氧化碳/环氧丙烷/马来酸酐三元共聚物对PPC/PHB共混物力学性能的影响

采用稀土三元催化剂制备了二氧化碳-环氧丙烷-马来酸酐三元共聚物(PPCMA).用红外和核磁谱图确定了PPCMA的结构及马来酸酐单元的含量,3 wt％马来酸酐投料量的PPCMA(共聚物中马来酸酐单元含量4.1％)的玻璃化转变温度(Tg)和起始热分解温度(Td-5％)分别为13.4℃和217℃,拉伸强度为2.88 MPa,断裂伸长率为1669％,与二氧化碳-环氧丙烷共聚物(PPC)相比,引入少量马来酸酐的PPCMA有望成为一种韧性材料,并可对PPC和聚3-羟基丁酸酯(PHB)共混体系进行改性.当在PPC/PHB共混体系中添加10 wt％的PPCMA时,所得共混材料的拉伸强度为18.2 MPa,断裂伸长率则提高到85％,较没有添加PPCMA的样品提高了4.25倍,因此PPCMA的加入能有效提高PPC/PHB共混体系的韧性,改善PPC/PHB共混体系的力学性能.偏光显微镜的研究表明PPC/PHB共混体系加入PPCMA后,很快形成大量尺寸小的PHB球晶,且结晶速度大幅度提高,因此PPCMA在一定意义上可视为一种特殊的“成核剂”.     

马来酸酐接枝稀土异戊橡胶接枝率的测试方法

以马来酸酐(MAH)和稀土异戊橡胶(IR)聚合液为主要原料,采用溶液接枝改性反应制备了马来酸酐接枝稀土异戊橡胶(IR-g-MAH)。以IR-g-MAH接枝率的测试方法为研究对象,对比直接滴定法和返滴法,并进一步优化直接滴定法的测试条件。实验结果表明,直接滴定法测试的结果准确度高、重复性好,且测试过程简单。其较优的测试条件为:水解试剂为乙醇,样品用量为0.2~0.5g,KOH-乙醇标准溶液浓度为0.02~0.06mol/L。     

Naphthalic anhydride derivatives: Structural effects on their initiating abilities in radical and/or cationic photopolymerizations under visible light

Only one naphthalic anhydride derivative has been reported as light sensitive photoinitiator, this prompted us to further explore the possibility to prepare a new family of photoinitiators based on this scaffold. Therefore, eight naphthalic Naphthalic anhydride derivatives (ANH1‐ANH8) have been prepared and combined with an iodonium salt (and optionally N‐vinylcarbazole) or an amine (and optionally 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine) to initiate the cationic polymerization of epoxides and the free radical polymerization of acrylates under different irradiation sources, that is, very soft halogen lamp (～ 12 mW cm^?2), laser diode at 405 nm (～1.5 mW cm^?2) or blue LED centered at 455 nm (80 mW cm^?2). The ANH6 based photoinitiating systems are particularly efficient for the cationic and the radical photopolymerizations, and even better than that of the well‐known camphorquinone based systems. The photochemical mechanisms associated with the chemical structure/photopolymerization efficiency relationships are studied by steady state photolysis, fluorescence, cyclic voltammetry, laser flash photolysis, and electron spin resonance spin‐trapping techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2860–2866