Ti掺杂W$lt;sub$gt;18$lt;/sub$gt;O$lt;sub$gt;49$lt;/sub$gt;纳米线的电子结构与NO$lt;sub$gt;2$lt;/sub$gt;敏感性能的第一性原理研究

采用基于密度泛函理论框架下的第一性原理平面波超软赝势方法,通过理论建模,研究了Ti掺杂的非化学计量比W₁₈O₄₉纳米线的几何与能带结构以及电子态密度,并通过进一步计算NO₂/Ti-W₁₈O₄₉纳米线吸附体系的吸附能、电荷差分密度与电荷布居,分析了Ti掺杂W₁₈O₄₉纳米线的气体吸附与敏感性能. 计算发现,Ti掺杂改变了W₁₈O₄₉纳米线的表面电子结构,引入的额外的杂质态密度和费米能级附近能带结构的显著变化,使掺杂纳米线带隙与费米能级位置改变,纳米线导电性能增强. 吸附在W₁₈O₄₉纳米线表面的NO₂作为电子受体从纳米线导带夺取电子,导致纳米线电导降低,产生气体敏感响应. 与纯相W₁₈O₄₉纳米线相比,NO₂/Ti-W₁₈O₄₉纳米线吸附体系内部存在更多的电子转移,从理论上定量地反映了Ti掺杂对改善W₁₈O₄₉纳米线气敏灵敏度的有效性. 对Ti掺杂纳米线不同气体吸附体系电子布居的进一步计算表明,Ti掺杂纳米线对NO₂气体具有良好的灵敏度和选择性. 关键词： 密度泛函计算 Ti掺杂 18O₄₉纳米线')" href="#">W₁₈O₄₉纳米线 气敏     

钛掺杂的非化学计量LiFePO4的合成与电化学性能研究

0 Introduction Phospho-olivine LiFePO4 as a prom ising cathode m aterialforlithium ion batteries has aroused consider- able interests due to its low cost, benign for environ- m ent, high tem perature capability and relatively high energy density[1,2]. Ith…     

Li<Subscript>0.99</Subscript>Ti<Subscript>0.01</Subscript>FePO<Subscript>4</Subscript>/C composite as cathode material for lithium ion battery

Three kinds of LiFePO₄ materials, mixed with carbon (as LiFePO₄/C), doped with Ti (as Li_0.99Ti_0.01FePO₄), and treated both ways (as Li_0.99Ti_0.01FePO₄/C composite), were synthesized via ball milling by solid-state reaction method. The crystal structure and electrochemical behavior of the materials were investigated using X-ray diffraction, SEM, TEM, cyclic voltammetry, and charge/discharge cycle measurements. It was found that the electrochemical behavior of LiFePO₄ could be increased by carbon coating and Ti-doping methods. Among the materials, Li_0.99Ti_0.01FePO₄/C composite presents the best electrochemical behavior, with an initial discharge capacity of 154.5 mAh/g at a discharge rate of 0.2 C, and long charge/discharge cycle life. After 120 cycles, its capacity remains at 92% of the initial capacity. The Li_0.99Ti_0.01FePO₄/C composite developed here can be used as the cathode material for lithium ion batteries.     

LiNi_(0.8-y)Ti_yCo_(0.2)O_2电极材料中钛离子掺杂作用机理的研究

应用恒流充放电、非现场X射线粉末衍射 (ex situXRD)、电化学交流阻抗 (EIS)、程序控温脱附 质谱联用(TPD MS)等实验方法研究LiNi0. 8-yTiyCo0. 2O2电极材料钛离子的掺杂作用机理.结果表明,掺钛后的电极材料于充放电过程中的结构相变和晶格的膨胀收缩受到抑制,在高电位下的界面反应活性减弱,从而减小了由结构变化和界面反应引起的容量损失;同时,钛的掺杂增强了电极材料在脱锂状态下的结构稳定性,抑制了电极材料和电解液的分解或氧化反应,以上两个方面分别改善并提高了电极材料的充放电循环性能及其热稳定性.     

Ab initio calculation of chromium oxide containing Ti dopant

First-principles computations based on the density functional theory within the generalised gradient approximation and introduced intra-atomic interaction term for strongly correlated electrons (DFT + U method) has been used in this work. Ti impurity doping in the α-Cr₂O₃ crystal has been carried out considering single defect model within the periodic crystalline structure. Atomic displacements, Bader charges on atoms have been computed showing that Ti dopant converts the chemical bonding in its neighbourhood into more ionic one. The defect-local microstructure is such as there exist general tendency of atomic rearrangements away with respect to the Ti imperfection. It is found that defect incorporation produces some local changes upon the band structure of the material and also induces a metallic state. That implies n-type electrical conductivity in the Ti-doped α-Cr₂O₃ crystals and relates our work directly to a number of experimental studies in this area. Our results provide evidence over change in magnetic moments in the vicinity of defect, which means that the chromium oxide doped with Ti impurity might not act as an antiferromagnetic substance.