制备参数对高比表面积介孔催化剂La-Co-Zr-O结构与性能的影响

采用双表面活性剂模板(十六烷基三甲基溴化铵和聚乙二醇辛基苯基醚的混合物)分解法制备了不同原子比(n_La+n_Co)/(n_La+n_Co+n_Zr)和不同温度焙烧的系列介孔混合氧化物催化剂La-Co-Zr-O。运用XRD、N₂吸附/脱附、XPS和H₂-TPR等技术对催化剂进行了表征，并以CO和C₃H₈氧化为模型反应，考察了组分配比和焙烧温度等参数对催化剂催化性能的影响。比表面积和孔径测试结果表明，样品具有很高的比表面积(108～266 m²·g^-1)和分布集中的孔径(3.4～3.9 nm)，Zr含量较高的样品比表面积较大。XRD结果表明，样品中的活性组分钴物种主要以Co₃O₄形式存在；XPS和H₂-TPR结果表明，样品中可还原的晶格氧的数量、活动度以及表面钴原子浓度均与催化剂对CO和C₃H₈的氧化性能密切相关。原子比为0.5的样品中，较多的晶格氧易于在相对低温下还原；而原子比为0.7的样品表面钴原子浓度较高，这使得两样品均表现出较高的催化活性。经650 ℃焙烧的样品仍保持较高的比表面积(108 m²·g^-1)和分布集中的介孔孔径(最可几孔径约3.8 nm)，且催化活性下降幅度也很小，表明该系列介孔催化剂具有优良的抗烧结能力和介孔热稳定性。     

The intercalation of cetyltrimethylammonium cations into muscovite by a two-step process: II. The intercalation of cetyltrimethylammonium cations into Li-muscovite

The alkylammonium cations were successively intercalated into the interlayer of muscovite. It was achieved by inorganic-organic ion exchange in the hydrothermal reaction of the LiNO₃-treated muscovite with cetyltrimethylammonium bromide solution. One-dimensional Patterson plots and electron density calculations show that hydrated Li⁺ and CTA⁺ cations entered the interlayer of muscovite successively. The CTA⁺-intercalated muscovite was characterized by powder X-ray diffraction and elemental analysis, in conjunction with FTIR, nuclear magnetic resonance, X-ray photoelectron spectra, high-resolution transmission electron microscopy, etc. The experiments show that organo-muscovite composite with ordered structure has been obtained. The CTA⁺ headgroups are distributed in the interlayer uniformly. However, the arrangement and conformation of CTA⁺ chains are strongly dependent upon the reaction temperature. At lower reaction temperature, the chains of CTA⁺ ions adopt a little more disordered arrangement and have higher gauche/trans conformer ratio, resulting in the disturbance to the interlayer symmetry. Whereas at higher reaction temperature, the sample with paraffin-like arrangement of CTA⁺ chains could be obtained, in which the methylene chains of CTA⁺ adopt a fully stretched, all-trans conformation.     

单链四苯酚基卟啉在CTAB胶束微环境中的去质子化现象

叶绿素分子的光能转化功能的实现与其聚集状态、所处微环境性质及条件密切相关[1,2]．如何设计控制叶琳类分子在膜介质中的增溶位置，对于研究叶琳在膜体系中的跨膜电子传递、光能转化过程具有重要意义．本文研究了长链双亲卟啉──单链四苯酚基叶琳THPPH2在CTAB胶束中的去质子化，该过程能控制叶琳环在胶束中的增溶位置，使其由内核转移到胶束表面．1实验部分1·1仪器和测试条件岛津UV－240型紫外可见光谱仪（带有恒温夹套），狭缝宽2nm，石英池厚1cm，所用试剂皆为分析纯．UV光谱测试均在恒温条件下进行．1．2溶液的配制含一个十六…     

Hydrolysis of cephanone in the micelles with different charges

The hydrolysis of cephanone in water and micelles with different charges was studied by UV-vis absorption spectroscopy. The change of pH with the hydrolysis of cephanone was determined. The mechanism of the hydrolysis and the effect of the acidity of the media on the hydrolysis were studied. The results show that the hydrolysis rate of cephanone increases with the acidity. Compared with water, SDS micelles accelerate this hydrolysis, whereas CTAB and Triton X-100 micelles suppress it. The effects of the micelles with different charges on the hydrolysis are explained by the proton concentration of the micro-environment where cephanone exists and by the charge density of the polar group of the cephanone molecules.     

乙酰水扬酸在CTAB胶束溶液中的水解反应

乙酰水扬酸(阿斯匹林)具有较高的药用价值,对它的性质有较多的研究,如在水中的稳定性和水解等。乙酰水扬酸有一个脂键和一个羰基。脂键易水解,水解后药用价值虽未降低,但有很大的副作用,因而研究抑制乙酰水扬酸水解是很有意义的。本文用RD—Ⅲ型热导式自动量热计研究了在十六烷基三甲基溴化胺(CTAB)胶束溶液中乙酰水扬酸的水解反应热动力学。     

Zeta-potentials of self-assembled surface micelles of ionic surfactants adsorbed at hydrophobic graphite surfaces

The zeta-potentials of the self-assembled surface ionic surfactants (sodium dodecyl sulfate—SDS and hexadecyltrimethyl ammonium bromide—CTAB) on graphite surfaces were determined both from streaming potential and electrophoretic mobility measurements. The adsorption of the surfactants at graphite–liquid interfaces has been studied using atomic force microscopy (AFM) soft-contact imaging which shows the formation of linear, parallel hemicylinders with headgroups oriented towards the solution. The magnitude of the zeta-potential increased with an increase in surfactant concentration, reaching a constant value at a concentration corresponding to the point of surface micelle formation as confirmed from AFM imaging. The streaming potential and electrophoretic mobility measurements showed that the zeta-potentials of SDS and CTAB surface micelles adsorbed at the graphite surface were about −75 and +70 mV, respectively, well in agreement with the values reported for bulk phase micelles in the literature.     

模板沉淀法制备高比表面积MnOx-CeO2催化剂及其CO低温氧化活性

以十六烷基三甲基溴化铵(CTAB)为模板剂, Ce(NO3)3和Mn(NO3)2为前驱体, 通过沉淀法制备了一系列晶粒小于5 nm的高比表面积MnOx-CeO2催化剂, 并考察了催化剂的CO氧化反应性能. 采用XRD、Raman光谱、TPR和N2气吸附脱附等手段对催化剂的比表面积、晶粒大小和物相组成进行了表征. 当Mn摩尔分数≤34%时, 催化剂的比表面积在160~170 m2/g之间; 当锰含量进一步提高后, 催化剂的比表面积呈下降趋势. 当Mn摩尔分数≤34%时, XRD只检测到CeO2物相, 而Raman光谱则检测到α-Mn2O3的存在. 催化剂上表现出较好的CO氧化活性, 这主要归因于高比表面积. 随着锰含量的增加, 催化剂的轻化频率(TOF)下降, 表明高分散、小晶粒的氧化锰物种是催化剂的活性物种. H2-TPR结果表明, 催化剂的CO氧化活性还与催化剂中高价锰物种有关. 焙烧温度升高使催化剂的晶粒增大、比表面积减小, 同时催化剂中锰的平均价态降低, 导致CO氧化活性下降.     

单分散、小粒径金纳米颗粒的形貌控制增长

利用种子生长法合成了形状规则、尺寸单一的形状不同金纳米颗粒. 其中立方体纳米颗粒的边长为33±2 nm, 它是在十六烷基三甲基溴化胺(CTAB)存在的条件下, 在种子的表面上用弱还原剂——抗坏血酸还原而成的. 在这个体系中, 表面活性剂CTAB既作为保护剂又作为颗粒成长的导向剂. 用UV-vis, TEM, XRD对纳米颗粒的光学性质、几何形状、纳米颗粒的单层膜概貌以及纳米颗粒的晶体结构作了表征. 考察了种子生长的时间、种子的量、抗坏血酸的量对生成纳米颗粒形状的影响.     

青霉素G钾盐在CTAB胶束中的水解及其抑制

以紫外光谱法研究了青霉素G钾盐(Pen-K)在十六烷基三甲基溴化铵（CTAB）胶束体系中的水解反应, 并探讨了水解反应机理.结果表明, CTAB胶束对Pen-K的水解具有抑制作用; Pen-K在CTAB胶束体系水解时,体系pH值的变化与在水中相似, 表明H＋浓度对这种抑制作用影响较小.红外光谱和微极性研究表明,部分Pen-K钾盐定位于CTAB胶束栅栏层中, 增加了其稳定性.     

Fabrication of MCM-41 mesoporous silica through the self-assembly supermolecule of β-CD and CTAB

Using the self-assembly β-cyclodextrin (β-CD) and cetyltrimethylammonium bromide (CTAB) as structure-directing agents, high-quality ordered MCM-41 silicas have been prepared. Small-angle X-ray diffraction (SXRD), N₂ adsorption-desorption and scanning electron microscope (SEM) techniques were used to characterize the calcined samples. Results showed that the pore structure of the resulting mesoporous silica belonged to the two-dimensional hexagonal structure (space group p6mm). The high-quality hexagonal structure was formed as n?1 (n denotes molar ratio of β-CD to CTAB). N₂ adsorption-desorption curves revealed type IV isotherms, H4 hysteresis loops, for all samples, and H1 hysteresis loops for samples at n=0, 0.1, 1 and 2, respectively. The pore size and the pore wall thickness of the samples increased with the increase in n values, respectively.