直接碳燃料电池燃料的研究进展

直接碳燃料电池(DCFC)是一种清洁高效利用碳资源发电的装置。其因能量转换率高,对环境污染小,燃料选择范围广等优点获得了越来越多的关注。DCFC的性能与使用的燃料密切相关,为了探究燃料对DCFC的影响,本文分别阐述了石墨、炭黑、中密度纤维板、生物质、煤、活性炭的特性及改性方法,分析讨论了燃料表面含氧官能团以及燃料中的金属催化剂对阳极电化学反应的促进作用,发现燃料表面化学性质要比比表面积更加重要。同时,本文也提出了对生物质这一优良的可再生资源的期待,为未来DCFC燃料的发展提供参考。     

复合电极La-Ni-B的制备及电催化偏硼酸钠的性能

为进一步提高对偏硼酸钠电催化还原的效率,采用化学镀的方法,以铜片为基体,PdCl2乙醇胶体溶液为活化剂,乙醇为化学镀溶剂,制备了稀土复合电极La-Ni-B.并采用XRD、SEM、EDS方法对催化剂进行表征分析,结果表明稀土合金以纳米颗粒的形式附着在基体表面,所得合金膜是非晶态的.通过循环伏安法研究了复合电极La-Ni-B用于电解偏硼酸钠制备硼氢化钠的可行性.以硼氢化钠实际生产量为指标,探讨了直流、脉冲两种不同供电方式、脉冲电流频率、电解时间对电解行为的影响.结果表明稀土镧对电解偏硼酸钠有催化作用,以20 mL镀液制备的复合电极,在脉冲频率阳极时间T1=1 s,阴极时间T2=1 s时,最佳电解时间为4h.复合电极在重复使用3次的情况下,硼氢化钠产量降低15;,催化剂的重复使用性能良好.     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

基于电化学发光和阻抗技术研究DNA单碱基错配

单碱基错配的识别和稳定性差异在核酸多态性研究中至关重要。在同一电化学传感器平台上，采用电化学发光（ECL）和电化学阻抗（EIS）2种技术，协同研究DNA链中不同类型和不同位点的单碱基错配识别和稳定性差异。电极表面具有茎环构象的探针DNA与完全互补DNA、不同类型或不同位点单碱基错配DNA杂交前后的ECL和EIS信号强度变化有显著差异。信号强度变化可揭示单碱基错配识别的稳定性。结果表明，DNA链中心位点的C-A单碱基错配稳定性低于链两端的，靠近键合电极表面双链链端的C-A单碱基错配稳定性低于非键合电极表面双链链端的，同一中心位点C-X碱基对的稳定性顺序为C-G?C-T>C-A≥C-C。研究结果可为核酸多态性研究提供参考。     

基于有限体积虚拟区域方法的两相流动直接模拟

为提高计算效率，提出有限体积法离散下的虚拟区域颗粒两相流动直接模拟方法.在控制方程中加入相应的虚拟区域源项，保证了颗粒内部的刚体运动特性.该源项中含有颗粒信息部分及流体信息部分.在每次迭代后，对源项中的流体信息部分进行更新，从而更好地保证颗粒内速度的刚体分布.计算静止颗粒圆柱绕流及单个颗粒的沉降过程，验证了算法的准确性.     

MoSi2-SiC复合材料制备及抗热震性能研究

本文采用直接熔渗法制备二硅化钼-碳化硅(MoSi2-SiC)复合材料.以碳化硅(SiC)(粒度为0～2.5 mm、≤240目)为主要原料,水溶性树脂为结合剂,经混炼、成型、烘干后得到SiC坯体,再用二硅化钼(MoSi2)(D50 =3μm)粉末掩埋SiC坯体,在真空条件下2000℃保温3h进行熔渗烧结,制备出MoSi2-SiC复合材料.采用阿基米德排水法研究了MoSi2-SiC复合材料的显气孔率、体积密度;采用三点抗弯法测试了MoSi2-SiC复合材料1400℃抗折强度;采用热线法测试了MoSi2-SiC复合材料导热系数;采用X射线衍射测试了MoSi2-SiC复合材料的物相组成;采用SEM测试了MoSi2-SiC复合材料的显微结构;分别采用风冷法和水冷法对比研究了MoSi2-SiC复合材料、重结晶碳化硅(R-SiC)、氮化硅-碳化硅(Si3N4-SiC)三种材料抗热震性.结果表明:MoSi2在烧结过程中部分发生分解,生成了Mo5Si3,MoSi2、Mo5Si3填充于SiC的内部并实现烧结致密化,使MoSi2-SiC复合材料的显气孔率显著降低至5.7;,体积密度为3.59 g.cm-3.MoSi2-SiC复合材料中MoSi2、Mo5Si3含量分别为10wt; ～ 15wt;、3wt; ～ 5wt;.1000℃下MoSi2-SiC的导热系数为46.5W·m-1 ·K-1,显著高于R-SiC(28.3 W.m-1.K-1)材料、Si3N4-SiC(16.8 W.m-1.K-1)材料.综上所述,MoSi2-SiC复合材料的抗热震性能显著优于R-SiC材料、Si3N4-SiC材料.