Visible and near-infrared optical properties of Nd:CLNGG crystal waveguides formed by proton implantation

A Nd:CLNGG waveguide structure operated at wavelengths of both 632.8 nm and 1539 nm was demonstrated for the first time to our knowledge, which was produced by the 480-keV H~+ion implantation with a dose of 1.0×10~(17)protons/cm~2.Its propagating modes at 632.8 nm and 1539 nm were measured by the well-known prism coupling technique. The refractive index profile at either 632.8-nm wavelength or 1539-nm wavelength was optical barrier type in the proton-implanted Nd:CLNGG crystal optical waveguide, which was calculated by using the reflectivity calculation method. The near-field light intensity distributions were also simulated by the finite-difference beam propagation method in the visible and nearinfrared bands.     

Planar waveguides in neodymium-doped calcium niobium gallium garnet crystals produced by proton implantation

In this work, the fabrication and optical properties of a planar waveguide in a neodymium-doped calcium niobium gallium garnet(Nd:CNGG) crystal are reported. The waveguide is produced by proton(H~+) implantation at 480 ke V and a fluence of 1.0×10~(17) ions/cm~2. The prism-coupling measurement is performed to obtain the dark mode of the waveguide at a wavelength of 632.8nm. The reflectivity calculation method(RCM) is used to reconstruct the refractive index profile. The finite-difference beam propagation method(FD-BPM) is employed to calculate the guided mode profile of the waveguide.The stopping and range of ions in matter 2010(SRIM 2010) code is used to simulate the damage profile induced by the ion implantation. The experimental and theoretical results indicate that the waveguide can confine the light propagation.     

ICP-AES法测定丹参中的镉和铅

建立了利用电感耦合等离子体原子发射光谱(ICP-AES)法测定丹参中重金属元素Cd和Pb的方法,比较了干灰化法和湿化法两种样品处理方法对分析结果的影响,并测定了山东一些地区丹参中的Cd和Pb含量。结果表明：采用电感耦合等离子体原子发射光谱法检测丹参中的Cd和Pb,最低检出限(DL)分别为1.92和1.07 ng·mL-1;相对标准偏差(RSD)分别为3.14%和1.83%;回收率分别为103.05%和96.24%。利用湿法消解样品,精密度好,回收率高,优于干灰化法。干灰化法适合测定丹参中Pb,但不适合测定Cd,其回收率仅为0.1%。用湿法消解样品,测定不同产地丹参的Cd和Pb含量,结果表明：所测地区丹参的Cd, Pb含量大大低于《中华人民共和国药典》(2005)规定的中药材重金属含量标准,符合GAP生产的要求。     

Spectroscopic properties of Yb~(3+)-doped TeO_2–BaO–BaF_2–Nb_2O_5-based oxyfluoride tellurite glasses

A series of oxyfluoride glasses with the compositions of 75 mol% TeO2, 10 mol% Nb2O5,(15 mol%-x) BaO, x BaF2(x = 0 mol%, 5 mol%, 10 mol%, 15 mol%) doped with Yb2O3 were prepared by the melt-quenching method. Their emission cross-sections, fluorescence lifetimes, and gain properties were investigated by using the absorption spectra and the fluorescence decay curves. The results show that by substituting BaF2 for BaO, the emission cross-section decreases from 1.37 pm2 to 1.21 pm2, and the fluorescence lifetime increases from 0.71 ms to 0.96 ms. These properties indicate that this oxyfluoride tellurite glass may have potential uses as the Yb2O3-doped gain medium in a solid laser.     

ICP-AES法同时测定TiNi形状记忆合金中杂质Co、Cu、Cr、Fe、Nb

研究建立了ICP—AES同时测定TiNi形状记忆合金中Co、Cu、Cr、Fe、Nb5元素的方法。进行了必要的条件试验，选择了分析线及其他仪器工作参数；考察了方法检出限、H2SO4酸度及基体钛、镍对测定的影响、工作曲线线性。进行了准确度和精密度试验，各元素的加标回收率为Co98．4％。99．6％、Cu98．0％～103％、Cr98.9％～99．6％、Fe94．6％～95．8％、Nb99．8％。102％。5种元素的相对标准偏差范围为4．2％-10％。     

聚氨酯与铁电陶瓷粉复合物的电致感应性能研究

利用双辊制备了一系列热塑性弹性体聚氨酯（PU）和铁电钛酸锆酸铅盐（PZT）的电感应PZT／PU复合物。X－衍射和SE镜结果显示,复合物中,在铁电相中PZT陶瓷粉呈现结晶态并且均匀分布在PU基体中,复合物的弹性模量和相对电容率随着复合物中PZT体积分数增加而升高,在高压电场下,低PZT含量的复合物呈现负的电致伸缩应力,当PZT体积分数增加到6％以上时,在某个临界电场下,复合物呈现出电致伸缩应力反转的特性,即电致伸缩应力从负转变为正,并且发生应力反转的临界电场随着复合物中PZT体积分数的增加而降低,PU的电致伸缩特性与PZT在高电场下极化反转效应结合,导致了PZT／PU复合物这种有趣的性能,因此PZT／PU复合物将在高电压场方面作为传感器开关材料得到广泛应用。     

Optical planar waveguides in Yb³⁺-doped phosphate glasses produced by He⁺ ion implantation

Optical planar waveguides in Yb 3+-doped phosphate glasses are fabricated by implanting triple-energy helium ions. The guiding modes and the near-field intensity distribution are measured by using the prism-coupling method and the end-face coupling setup with a He-Ne laser at 633 nm The intensity calculation method (ICM) is used to reconstruct the refractive index profile of the waveguide. The absorption and the fluorescence investigations reveal that the glass bulk features are well preserved in the active volumes of the waveguides, suggesting the fabricated structures for possible applications as waveguide lasers.     

金属材料分析(Ⅱ)

评述了2006～2007年两年间, 金属材料分析领域的国内现状与进展概况. 内容包括: 称量分析法;滴定分析法;分子光谱分析(分光光度法、催化动力学分光光度法);原子光谱分析(原子吸收光谱法、原子荧光光谱法、原子发射光谱法、质谱分析法、 X-射线荧光光谱法);电化学分析;金属中气体分析;原位分析;标准分析方法制定与标准物质(标准样品)研制;不确定度评定等在金属材料分析中的应用进展.参考文献420篇.     

Optical planar waveguides in yb3＋-doped phosphate glasses produced by He＋ ion implantation

Optical planar waveguides in Yb 3+-doped phosphate glasses are fabricated by implanting triple-energy helium ions. The guiding modes and the near-field intensity distribution are measured by using the prism-coupling method and the end-face coupling setup with a He-Ne laser at 633 nm The intensity calculation method (ICM) is used to reconstruct the refractive index profile of the waveguide. The absorption and the fluorescence investigations reveal that the glass bulk features are well preserved in the active volumes of the waveguides, suggesting the fabricated structures for possible applications as waveguide lasers.     

质子注入掺镱磷酸盐玻璃平面光波导的近红外特性

在能量为(0.5+0.55)MeV和剂量为(1.0+2.0)×10^16 ions/cm^2的条件下,通过氢离子注入制备了掺Yb^3+磷酸盐玻璃波导,并研究了该波导在近红外波段的特性.棱镜耦合法测量的离子注入波导的导模的有效折射率与反射计算法计算的有效折射率基本吻合.通过模拟辐照引起的空位分布,探讨了离子注入平面波导的形成理论.利用FD-BPM对波导中的传播模式进行了模拟,结果表明高能量的氢离子注入掺Yb 3+磷酸盐玻璃能够制备出近红外波导结构.