Pt/γ-Al2O3/CexZr1-xO2催化剂低温催化燃烧去除饮食油烟

以CexZr1-xO2固溶体做载体,制备了系列Pt/γ-Al2O3/CexZr1-xO2催化剂(x=1,0.75,0.5,0.25,0).应用Brunauer-Emmet-Teller(BET)比表面积分析、X射线衍射(XRD)和H2程序升温还原(H2-TPR)等手段对催化剂进行相关表征,并系统研究了催化剂在饮食油烟催化燃烧中的催化活性.BET结果表叫催化剂的比表面积随Ce/Zr摩尔比的减小而减小.XRD结果表明贵金属Pt很好地分散在氧化铝和CexZr1-xO2固溶体上.H2-TPR结果发现催化剂Pt/γ-Al2O3/Ce0.5Zr0.5O2的还原峰面积最大且氧离子的流动性最好.催化活性研究结果表明Pt负载在CexZr1-xO2固溶体上有利于油烟的催化燃烧,降低了反应温度.随着CexZr1-xO2固溶体中Ce/Zr摩尔比的变化,催化剂的活性顺序为Pt/γ-Al2O3/Ce0.5Zr0.5O2＞Pt/γ-Al2O3/Ce0.25Zr0.75O2＞Pt/γ-Al2O3/Ce0.75Zr0.25O2＞Pt/γ-Al2O3/CeO2＞Pt/γ-Al2O3/ZrO2.     

NiO/MgxSi1-xOy 催化剂的制备及其在高温焦炉煤气中焦油组分催化裂解中的应用

采用溶胶-凝胶法制备了MgO和SiO2的二元复合氧化物载体,通过浸渍法制得NiO/MgxSi1-xOy催化剂,并使用Brunauer-Emmett-Teller(BET)吸附、X射线衍射(XRD)、透射电子显微镜(TEM)等时其进行表征.以甲苯和萘的混合物作为高温焦炉煤气中焦油组分的模型化合物,在固定床反应器中进行高温焦炉煤气中焦油组分催化裂解的研究.结果表明,催化剂的焙烧温度、反应空速以及载体中Mg和Si的原子比对反应活性有很大的影响.在反应温度800℃、水碳摩尔比为0.7的条件下,10%(w)NiO/Mg0.80Si0.20Oy催化剂能将甲苯和萘完全转化为CO、CH4等小分子气体,显示出很好的催化活性、稳定性以及好的抗积炭性能.     

CeZrYLaO对Fe基整体式稀薄甲烷催化燃烧性能的影响

采用共沉淀法制备了高性能低铈储氧材料Ce_0.35Zr_0.55Y_0.07La_0.03O_1.95(OSM,储氧材料)和胶溶法制备了耐高温、高比表面的La-Al₂O₃并以它们为载体,制备了一系列整体式铁基催化剂。考察了该系列催化剂对甲烷稀薄燃烧的催化性能,并用低温N₂吸附-脱附,储氧能力(oxygen storage capacity,OSC),XRD,XPS和H₂-TPR等测试手段对载体和催化剂进行了表征。活性测试结果表明所制得的整体式催化剂Fe/OSM+La-Al₂O₃可在50 000 h^-1的高空速条件下使含量为1%的甲烷在474 ℃起燃,565 ℃完全转化;低温氮吸附-脱附测试结果表明,所制得的Ce_0.35Zr_0.55Y_0.07La_0.03O_1.95经1 050 ℃焙烧5 h后的BET比表面积达33 m²·g^-1,孔容为0.14 mL·g^-1;La-Al₂O₃经1 050 ℃焙烧5 h后的BET比表面积达125 m²·g^-1,孔容为0.46 mL·g^-1,是优良的催化剂载体;OSC测试结果表明,加入储氧材料(oxygen storage material(OSM))能增加催化剂的储氧性能,有利于催化活性的提高;XRD测试结果表明,OSM以均一固溶体存在;XPS测试结果表明,Fe₂O₃与OSM载体之间的相互作用最强;H₂-TPR测试结果表明,加入OSM能增加催化剂的还原性能,从而提高了催化活性。     

MoNi/γ-Al2O3催化剂的制备及其催化乙酸临氢酯化反应性能

采用等体积浸渍的方法制备了MoNi/γAl2O3系列催化剂,利用XRD和TPR手段表征了其结构随Mo助剂的添加量和催化剂还原温度的变化,并考察了在3 MPa的氢气压力下,乙酸催化酯化的反应性能.结果表明,添加助剂Mo有利于Ni均匀地分散,减弱了Ni与Al之间的相互作用,抑制了NiAl2O4尖晶石结构的形成,降低了催化剂的还原温度.催化剂经600℃还原后,NiO被还原为Ni0.当加入经过600℃还原的催化剂MoNi/γ-Al2O3后,乙酸临氢反应转化率显著提高,可达33.2%.在3 MPa的氢气压力下,乙酸反应的途径可能为一部分乙酸被还原得到乙醇,乙醇与未还原的乙酸发生酯化,以乙酸乙酯和水为反应产物.     

YSZ-Al2O3的制备及其负载的单钯密偶催化剂的催化性能

采用胶溶法制备了含YSZ(Y2O3稳定的ZrO2,质量比为1:9)为0,10wt%,15wt%,20wt%,25wt%的YSZ-Al2O3,分别用低温N2吸附-脱附、X射线衍射(XRD)、氨气程序升温脱附(NH3-TPD)技术对它们进行了表征.低温N2吸附结果表明,1000℃焙烧5 h后,钇锆含量为15%的YSZ-Al2O3,有最大的比表面积和孔容,分别达到146 m2·g-1和O.41 mL·g-1,孔径分布集中在9-10 nm.XRD结果表明,添加钇锫的氧化铝以γ相存在,钇锆以固溶体形式存在于氧化铝中.以YSZ-Al2O3材料为载体,采用浸渍法制备了Pd含量为2 g·L-1的单钯密偶催化剂.催化剂活性测试结果表明,添加钇锆能有效地提高催化剂对丙烷的催化活性.当钇锆含量达到15%时,催化剂的起燃温度最低,为275℃.     

ZrO2∶Tb3+纳米晶的离子交换法制备及其发光特性

以强碱性阴离子交换树脂为交换介质,采用离子交换法制备了稀土Tb3+离子掺杂的ZrO2:Tb3+纳米晶.通过XRD,TG-DSC,TEM,HRTEM等手段分析了样品制备过程的物相变化及晶粒形貌,用荧光光度计研究了样品的三维荧光光谱、激发光谱和发射光谱.结果表明:前驱沉淀物经800℃焙烧处理2 h,制备出近方型形貌,颗粒分散性好、尺寸约为40 nm的四方相ZrO2:Tb3+纳米晶.当焙烧温度升高到900℃以上时样品出现了少量单斜晶相,而经800℃焙烧处理的纯Zr02是以四方相和单斜相同时存在.说明稀土Tb3+离子的掺杂对ZrO2基质的四方晶相起到稳定作用.由ZrO2:Tb3+)的等角三维荧光光谱图显示Tb3+在ZrO2基质中的最佳激发波长为290 nm:在290 nm波长光的激发下观察到纳米ZrO2中Tb3+的发射峰位于491,545,582 nm分别对应于Tb3+的5D4→7F6、5D4→7F5、5D4→7F4、5D4→7F4能级跃迁,以491,545nm的发射峰最强,其中经800℃焙烧处理的样品其5D4→7F6跃迁发射与5D4→7F5跃迁发射强度几乎相同,说明该法制备的纳米ZrO2:Tb3+中5D4→7F6跃迁发射增强,使Tb3+发光的蓝色成分增加了.     

Ammonium metavanadate： A novel catalyst for synthesis of 2-substituted benzimidazole derivatives

Ammonium metavanadate (10 tool%) was found to be a useful catalyst for the synthesis of various 2-substituted aryl benzimidazoles. It was used as an oxidizing agent for the condensation of o-pbenylenediamine with different substituted aryl aldehydes at room temperature in ethanol. The method was proved to be simple, convenient and the product was isolated with good yields (79-91%).     

Photolysis of organic pollutants in wastewater with 206 nm UV irradiation

A new-type UV light source(206 nm) was explored for the degradation of organic pollutants in wastewater for the first time.The degradation performances of triphenyltin chloride(TPTCl),dimethyl phthalate(DMP),as well as rhodamine B(RhB) were investigated.The results indicated that removal efficiency of 50 mg/L RhB,60 mg/L DMP and 120 mg/L TPTCl can reach 88.6%, 92.5%and 89.4%for 60 min,50 min and 75 min,respectively.By comparison of removal efficiency,we found 206 nm is superior to 253.7 nm UV in wastewat...     

Highly active catalyst for vinyl acetate synthesis by modified activated carbon

A new zinc acetate catalyst which was prepared from modified activated carbon exhibited extreme activity towards the synthesis of vinyl acetate.The activated carbon was modified by nitric acid,vitriol and peroxyacetic acid(PAA).The effect on specific area, structure,pH and surface acidity groups of carriers by modification was discussed.Amount of carbonyl and carboxyl groups in activated carbon was increased by peroxyacetic acid treatment.The productivity of the new catalyst was 14.58%higher than that of...     

Covalently anchored sulfonic acid on silica gel （SiO2-R-SO3H） as an efficient and reusable heterogeneous catalyst for the one-pot synthesis of 1,8-dioxooctahydroxanthenes under solvent-free conditions

A highly efficient one-pot synthesis of 1,8-dioxooctahydroxanthenes under solvent-free conditions catalyzed by sulfonic acid covalently anchored onto the surface of silica gel is reported.All types of aldehydes,including aromatic,unsaturated,and heterocyclic,are used.The silica gel/sulfonic acid catalyst (SiO2-R-SO3H) is completely heterogeneous and can be recycled.