蓝晓科技

正西安蓝晓科技有限公司是专业从事吸附分离功能高分子材料的高新技术企业。公司集研发、生产和销售为一体。在西安高新开发区拥有1000余平方米的商务中心。在西安经济技术开发区泾河工业园区建有现代化的特种树脂生产基地和研发中心,占地面积40000余平方米,是目前为止国内最大的特种树脂生产基地,以及国内设备最先进、专业技术人员配置最完善的特种树脂研发中心。蓝晓科技是目前中国产量最大、品种最齐全的特种树脂制造商。年产特种树脂超过10000立方米,     

中国化学会第17届反应性高分子学术讨论会征文启事

正经中国化学会批准,中国化学会第17届反应性高分子学术讨论会定于2014年7月18~21日在常州大学召开,欢迎您报名参加,并欢迎您就下列内容踊跃投稿:1.离子交换材料、吸附材料、高分子催化剂、高分子试剂2.生物医用高分子材料3.新型反应性高分子(如高分子膜、纤维等分离材料)4.反应性高分子的合成、应用及表征论文摘要要求具有创新性、指导性,凡已在国内外学术会议上报     

Blue electroluminescence of a novel Zn~(2+)–β-diketone complex with a carbazole moiety

In this letter, a novel zinc complex of Zn(ECTFBD)2 was synthesized by an environment-friendly grinding technique in high yield. Its structure was confirmed by1H NMR, MS and EA. HECTFBD is 1-(9-ethyl-9Hcarbazol-3-yl)-4,4,4-trifluorobutane-1,3-dione. Zn(ECTFBD)2-based light-emitting devices were fabricated. The architecture of the devices was ITO/PEDOT(40 nm)/100 wt% PVK: 40 wt% OXD-7: x wt% Zn(ECTFBD)2(85 nm)/CsF(1.5 nm)/Al(100 nm), where x = 1, 5, and 10(relative to the mass of PVK and OXD-7). The three devices displayed blue emissions with peaks at 450, 458, and 460 nm, respectively. A maximum luminous efficiency of 0.86 cd/A and a luminance of 228 cd/m2were achieved by the 1 wt% doped device. So, we demonstrated further that Zn2+–b-diketone complexes can be effectively severed as a class of new electroluminescent materials. In addition, the thermal stability of Zn(ECTFBD)2 was tested and the UV–vis and photoluminescent behaviors of Zn(ECTFBD)2 in CH2 Cl2 were investigated.     

Synthesis and electrochemical performance of LiNi0.6Co0.2Mn0.2O2 as a concentration-gradient cathode material for lithium batteries

A well-ordered and spherical LiNi0.6Co0.2Mn0.2O2 cathode material was successfully synthesized from Ni and Mn concentration-gradient precursors via co-precipitation. The crystal structure, morphology and electrochemical properties of LiNi0.6Co0.2Mn0.2O2 were characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive spectroscopy, and charge-discharge tests. The material delivered an initial discharge capacity of 174.3 mAh/g at 180 mA/g （1 C rate） between 2.8 and 4.3 V and more than 93.1% of that was retained after 100 cycles. In addition, it also exhibited excellent rate capability, high cut-off voltage and temperature performance.     

Synthesis and thermal properties of novel calix[4]arene derivatives containing 1,2,3-triazole moiety via K2CO3-catalyzed 1,3-dipolar cycloaddition reaction

Two calix[4]arene derivatives containing 1,2,3-triazole moiety were synthesized via K2CO3-catalyzed1,3-dipolar cycloaddition reaction between calix[4]arene-based azide and active methylene compounds in good yields.The structures of the two compounds synthesized herein were fully confirmed by 1HNMR,,（13）C NMR,and MS（ESI）.The thermal analysis showed that the mass losses of the synthesized compounds 4 and 5 containing 1,2,3-triazole groups are similar to each other.     

玻璃粉在陶瓷化硅橡胶中的应用

陶瓷化高分子材料具有优异的阻燃和防火性能,在国外已经有公司制备了这种材料来代替传统的防火材料。以硅橡胶为基体,通过添加玻璃粉,制备了一种陶瓷化高分子材料,研究了玻璃粉用量对硅橡胶力学性能和电学性能的影响,通过SEM观察了瓷化物表面和断面的形貌。结果显示,瓷化物表面比较致密,气孔较少,有一些玻璃相形成;断面存在大量气孔,具有较好的瓷化性能,瓷化物致密而又坚硬,可以抵抗至少1000℃的高温。随着玻璃粉添加量的提高,硅橡胶的流动性变差,硫化速率加快,拉伸强度和断裂伸长率都有不同程度的下降,邵氏硬度A一直上升,体积电阻率和表面电阻率则都呈现出先增大后减小的趋势。     

用于电致发光器件的蓝光聚合物材料研究进展

聚合物电致发光材料成型加工简便、可大面积生产,可应用于大面积平板显示及固体照明器件。与红、绿光聚合物发光材料相比,蓝光聚合物电致发光材料在发光性能、材料寿命等方面仍然存在较大差距,这成为全色显示的瓶颈。通过在聚合物主链上引入大体积的取代基或侧链、形成具有三维空间共轭效应的支化结构或能量可转移的主客体结构等,来改善溶解性和光物理性能等,从而得到发光效率高、色纯度好、热力学性能优异且材料加工性能良好的蓝光聚合物电致发光材料。本文从材料设计的角度简要介绍了国内外蓝光聚合物发光材料的主要研究进展。     

有机二元酸-水体系中In(OH)_3/In_2O_3微纳材料的制备与表征

本文利用系列有机二元酸-水体系作为制备In(OH)3纳米晶体介质,采用低温水热法成功制备了不同形貌和尺寸的In(OH)3为纳材料。利用扫描电镜(SEM)、透射电镜(TEM)、X-射线衍射(XRD)、傅立叶红外光谱仪(FT-IR)和拉曼光谱仪(Raman)等手段分别对材料的形貌、结构和物相等进行了表征与分析。实验结果表明,通过本研究方法,在己二酸水体系中可以得到较均一的尺寸在300-400 nm范围的In(OH)3球形粒子,而在癸二酸水体系中则得到棒状和片状混杂的In(OH)3纳米颗粒。样品在450°C条件下焙烧4 h后,可获得相应的具有良好形貌继承性的In2O3微纳材料。     

Interconnected sandwich structure carbon/Si-SiO2/carbon nanospheres composite as high performance anode material for lithium-ion batteries

In the present work,an interconnected sandwich carbon/Si-SiO2/carbon nanospheres composite was prepared by template method and carbon thermal vapor deposition（TVD）.The carbon conductive layer can not only efficiently improve the electronic conductivity of Si-based anode,but also play a key role in alleviating the negative effect from huge volume expansion over discharge/charge of Si-based anode.The resulting material delivered a reversible capacity of 1094 mAh/g,and exhibited excellent cycling stability.It kept a reversible capacity of 1050 mAh/g over 200 cycles with a capacity retention of 96%.     

Graphene oxide assisted facile hydrothermal synthesis of LiMn0.6Fe0.4PO4 nanoparticles as cathode material for lithium ion battery

Assisted by graphene oxide（GO）,nano-sized LiMn0.6Fe0.4PO4 with excellent electrochemical performance was prepared by a facile hydrothermal method as cathode material for lithium ion battery.SEM and TEM images indicate that the particle size of LiMn0.6Fe0.4PO4（S2）was about 80 nm in diameter.The discharge capacity of LiMn0.6Fe0.4PO4 nanoparticles was 140.3 mAh-g^1 in the first cycle.It showed that graphene oxide was able to restrict the growth of LiMn0.6Fe0.4PO4 and it in situ reduction of GO could improve the electrical conductivity of LiMn0.6Fe0.4PO4 material.