Multiple binding modes of the camptothecin family to DNA oligomers

The binding constants of camptothecin, topotecan and its lactone ring-opened carboxylate derivative to DNA octamers were measured by UV and NMR spectroscopy. The self-association of topotecan (TPT) was also measured. The carboxylate form of TPT binds in the same way as the lactone, but more weakly. Titration of TPT into d(GCGATCGC)2 shows a preferred location stacked onto the terminal G1 base. However, the intermolecular NOEs cannot be reconciled with a single conformation of the complex, and suggest a model of a limited number of conformations in fast exchange. MD calculations on four pairs of starting structures with TPT stacked onto the G1-C8 base pair in different orientations were therefore performed. The use of selected experimental "docking" restraints yielded ten MD trajectories covering a wide conformational space. From a combination of calculated free energies, NOEs and chemical shifts, some of the structures produced could be eliminated, and it is concluded that the data are consistent with two major families of conformations in fast exchange. One of these is the conformation found in a crystal of a TPT/DNA/topoisomerase I ternary complex [Proc. Natl. Acad. Sci. USA 2002, 99, 15 387-15 392].     

Head-to-head (HH) and head-to-tail (HT) conformers of cis-bis guanine ligands bound to the [Re(CO)3]+ core

We have prepared four complexes of the type [Re(guanine)(2)(X)(CO)(3)] (guanine = 9-methylguanine or 7-methylguanine, X = H(2)O or Br) in order to understand the factors determining the orientation of coordinated purine ligands around the [Re(CO)(3)](+) core. The 9-methylguanine ligand (9-MeG) was chosen as the simplest N(9) derivatized guanine, and 7-methylguanine (7-MeG) was chosen because metal binding to N(9) does not impose steric hindrance. Two types of structures have been elucidated by X-ray crystallography, an HH (head-to-head) and HT (head-to-tail) conformer for each of the guanines. All complexes crystallize in monoclinic space groups: [Re(9-MeG)(2)(H(2)O)(CO)(3)]ClO(4) (2) in P2(1)/n with a = 12.3307(10) A, b = 16.2620(14) A, c = 13.7171(11) A, and beta = 105.525(9) degrees, V = 2650.2(4) A(3), with the two bases in HT orientation and its conformer [Re(9-MeG)(2)(H(2)O)(CO)(3)]Br (3) in P2(1)/n with a = 15.626(13) A, b = 9.5269(5) A, c = 15.4078(13) A, and beta = 76.951(1) degrees, V = 2234.5(3) A(3), and the two bases in an HH orientation. Similarly, [Re(7-MeG)(2)(H(2)O)(CO)(3)]ClO(4) (4) crystallizes in P2(1)/c with a = 13.0708(9) A, b = 15.4082(7) A, c = 14.316(9) A, and beta = 117.236(7) degrees, V = 2563.5(3) A(3), and exhibits an HT orientation and [ReBr(7-MeG)(2)(CO)(3)] (5) in P2/c with a = 17.5117(9) A, b = 9.8842(7) A, c = 15.3539(1) A, and beta = 100.824(7) degrees, V = 2610.3(3) A(3), and shows an HH orientation. When crystals of any of these complex pairs are dissolved in D(2)O, the (1)H NMR spectrum shows a single peak for the H(8) resonance of the respective coordinated purine indicating a rapid equilibrium between HH and HT conformations in solution. DFT calculations simulating the rotation of one ligand around its Re-N bond showed energetic barriers of less than 8.7 kcal/mol. We find no hypochromic effect in the Raman spectrum of 3, which showed base stacking in the solid state. Neither steric interactions nor hydrogen bonding are important in determining the orientation of the ligands in the coordination sphere.     

Effect of diluting agent on sensitivity in capillary electrophoresis with amperometric detection

Besides the running buffer, pH of buffer, separation voltage and sampling time, the diluting agent was studied in this paper as one of the important factors influencing the sensitivity in capillary electrophoresis (CE) with amperometric detection (AD) when electrokinectic sampling was used. Clonidine hydrochloride, hydrochlorothiazide and rutin, which are positively charged, neutral and negatively charged, respectively, in aqueous solutions, could be perfectly separated by CE with 25 mmol x L(-1) Na(2)B(4)O(7) - 50 mmol x L(-1) NaH(2)PO(4) as running buffer and detected by measuring their current responses with AD. Before CE running, some kinds of diluents including water, methanol, formamide, running buffer, hydrochloric acid and sodium hydroxide were, respectively, applied to dilute the stock solutions of above three analytes and their effects on the sensitivity of CE-AD were investigated. The results showed that for electrokinetic injection, the current responses of these three analytes were greatly affected in different ways when different diluting agents were used. This method was applied to simultaneously determine the active ingredients in one Chinese compound hypotensor named Zhen Ju Jiang Ya Pian, in which the contents of clonidine hydrochloride, hydrochlorothiazide and rutin is very different as 0.03 mg : 5 mg : 20 mg per tablet, and satisfactory results were obtained by adjusting their sensitivity by selecting the suitable diluting agent.     

Influence of response factors on determining equilibrium association constants of non-covalent complexes by electrospray ionization mass spectrometry

A method for determining the equilibrium association constant of a complexation reaction A + B left harpoon over right harpoon AB by electrospray ionization mass spectrometry is described. The method consists in measuring the relative intensities of the peaks corresponding to A and to AB in equimolar A-B solutions at different concentrations C(0). The results are fitted by a non-linear least-squares procedure, with the two variable parameters being the equilibrium association constant K(a) and a factor R, defined by I(AB)/I(A) = R x [AB]/[A]. The factor R is the ratio between the response factors of AB and A, and corrects for the relative electrospray responses of the complex and the free substrate A, mass discrimination of instrumental origin and/or moderate in-source dissociation. The method is illustrated with the following two systems: complexes between a double-stranded 12-base pair oligonucleotide and minor groove binders, and cyclodextrin complexes with alpha,omega-dicarboxylic acids. For the oligonucleotide complexes, it is found that the response of the complex is not dramatically different to the response of the free oligonucleotide duplex, as the double helix conformation is disturbed by the drug only to a minor extent. In the case of cyclodextrin complexes, these complexes were found to have a much higher response than free cyclodextrin. This may be due to the fact that cyclodextrin is neutral in solution, whereas the complex is charged, but it can also stem from the fact that a significant proportion of the complex is in a non-inclusion geometry. The present method requires the exact determination of the concentrations of the reactants and is applicable to 1 : 1 complexes.     

exo- and enantioselective cycloaddition of azomethine ylides generated from N-alkylidene glycine esters using chiral phosphine-copper complexes

High diastereo- and enantioselectivities were obtained for the asymmetric 1,3-dipolar cycloaddition of azomethine ylides generated from N-alkylideneglycine esters with dipolarophiles using chiral phosphine-copper complexes as catalysts. Whereas the cycloaddition of azomethine ylides catalyzed by metal salts generally afforded endo-adducts as the predominant product, the present method is the first example of an exo-selective cycloaddition. [reaction: see text]     

Photocurrent generation in multilayer self-assembly films fabricated from water-soluble poly(phenylene vinylene)

A novel, water-soluble, cationic PPV derivative poly[(2,5-bis(3-bromotrimethylammoniopropoxy)-phenylene-1,4-divinylene)-alt-1,4-(2,5-bis(2-(2-hydroxyethoxy)ethoxy))phenylene vinylene] (BH-PPV) has been synthesized by a Heck coupling reaction. Multilayered assemblies of the BH-PPV and the sodium salt of hexa(sulfobutyl)fullerenes (C(60)-HS) were fabricated successfully by an alternate deposition technique. The multilayer structures were studied by UV/Vis spectroscopy, small angle X-ray diffraction, and atomic force microscopy. The photoinduced charge transfer property of the self-assembled multilayer film was also measured by a three-electrode cell technique. A steady and rapid cathodic 5.5 microA cm(-2) photocurrent response was measured as the irradiation of the multilayer film was switched on and off. Importantly, the response of on/off cycling is prompt and reproducible. A possible mechanism for the electron-transfer process is proposed.     

Analysis of flavonoid constituents from leaves of Acanthopanax senticosus harms by electrospray tandem mass spectrometry

Three known flavonoids, quercetin, quercitrin (quercetin-3-0-rhamnoside) and rutin (quercetin-3-0 rutinoside), have been identified for the first time in the leaves of Acanthopanax senticosus Harms by using electrospray tandem mass spectrometry techniques (ESI-MS(n)). The flavonoid hyperin (quercetin-3-0-beta-galactoside), already known to be present, was also investigated. The diagnostic fragment ions of the aglycone quercetin were obtained in the ESI-MS(n) experiments, and a fragmentation mechanism proposed.     

Understanding the role of stereoelectronic effects in determining collagen stability. 2. A quantum mechanical/molecular mechanical study of (Proline-Proline-Glycine)(n) polypeptides

The importance of vicinal and long-range interresidue effects in determining the stability of the collagen triple helix has been investigated by quantum mechanical (QM) and molecular mechanical (MM) computations on suitable model polypeptides, taking into account solvent effects by the polarizable continuum model (PCM). At the QM level, the PII conformation corresponds to an energy minimum for pentapeptide analogues incorporating the sequence Gly-Pro-Pro-Gly, irrespective of the down or up puckering of the pyrrolidine ring. However, our computations indicate that the alternation of down and up prolines characterizing collagen and collagen-like peptides is not due to an intrinsic preference of the Pro-Pro-Gly sequence. This result is confirmed by MM computations of longer polypeptides. Next, MM computations on model triple helices show that a better packing is obtained for specific values of backbone dihedrals, which, in turn, favor the alternation of down and up prolines along each chain.     

An FTIR study of the surface chemistry of the dynamic Si(100) surface during etching in alkaline solution

In situ FTIR spectroscopy has been used in the attenuated total reflectance (ATR) mode to investigate the surface chemistry of etching Si(100) surfaces in aqueous KOH. The effect of solution concentration and electrode potential on the Si-H vibrations has been explored and the experimental results compared with density functional theory calculations. In addition. the kinetics of surface passivation of n-Si(100) has been investigated using FTIR spectroscopy.     

The C(2)1pi(u) state of Na2 molecule studied by polarization labelling spectroscopy method

The C1pi(u) <-- X1sigma(g)+ system of Na2 is studied by the polarization labelling spectroscopy technique. Accurate molecular constants are derived for the observed levels nu = 0-12, J = 12-100 in the C1pi(u) state.