Matched Bearing Processing for Airborne Source Localization by an Underwater Horizontal Line Array

Location of an airborne source is estimated from signals measured by a horizontal line array （HLA）, based on the fact that a signal transmitted by an airborne source will reach a underwater hydrophone in different ways： via a direct refracted path, via one or more bottom and surface reflections, via the so-called lateral wave. As a result, when an HLA near the airborne source is used for beamforming, several peaks at different bearing angles will appear. By matching the experimental beamforming outputs with the predicted outputs for all source locations, the most likely location is the one which gives minimum difference. An experiment is conducted for airborne source localization in the Yellow Sea in October 2008. An HLA was laid on the sea bottom at the depth of 30m. A high-power loudspeaker was hung on a research ship floating near the HLA and sent out LFM pulses. The estimated location of the loudspeaker is in agreement well with the GPS measurements.     

Electromechanical Behavior of Interdigitated SiO2 Cantilever Arrays

Bending and first flexural mode vibration behavior of electrostatic actuated nanometer-sized interdigitated cantilever arrays are characterized under vacuum conditions. The pull-in＇＇ effect in dc driving and the hard spring effect＇＇ in ac driving are observed. A mass sensitivity of 20 fg is expected for our devices due to the ultra-small mass of the arm and relative high Q factor. The mass-spring lump model combined with Green＇s function method is used to fit the dc driving behaviors including the pull-in voltage. For the ac driving case, the polynomial expansion of the capacitive force is used in the model. The successfully fittings of the pull-in voltage and the hard spring effect prove that our simulation method could be used for guiding the geometrical design of cantilever-based sensors.     

HOMOTOPY CONTINUATION ALGORITHM FOR STRUCTURAL DAMAGE IDENTIFICATION

I. INTRODUCTIONStructural damages due to the loss of sti?ness such as crack, localization bulking have remarkablein?uences on the physical properties of structure such as deformation, stress, frequency and modelshape. So the change of these properties can be used to identify the damage location and degree ofstructures. The damage identification techniques based on these properties’ changes have attractedmuch attention in recent years, and many approaches have been developed[1??5].Nowaday…     

双侧截断数据的中位数回归(英文)

在很多实际应用中,个体寿命时间可能被同时左截断与右截断.本文在左右截断变量都能被观察到的假设下,提出了一种半参数推断方法,来分析协变量对于相应寿命时间或其某种变换的中位数的影响,并讨论了所得估计量的渐近性质.此外,本文还提供了一种基于经验似然的回归参数推断方法,并讨论了将这些方法推广到经典双侧截断数据的可能性.一些模拟计算被用于展示这些方法的有效性.     

关于Steiner问题的一个注记——连接五点之最小网络的一种寻优方案

本文讨论如何寻找连接平面上五个给定点的最小网络这一问题．通过发展越民义证明Pollack在1978年所给出的一个关于寻找连接平面上四个给定点的最小网络的重要结论的方法,我们给出了一个采用简单几何作图方法快速求解该问题的方案．     

矩阵多项式秩的和的恒等式及其应用

证明了矩阵A的两个多项式秩的和等于它们最大公因式与最小公倍式秩的和,这个结果不仅可以概括近期文献的相关工作,而且可以对应用矩阵多项式求逆矩阵的方法作进一步的研究,同时也可使关于矩阵秩恒等式的最新讨论获得一种简单统一的处理方法.     

基于最小一乘准则的三次样条对利率期限结构的拟合

将基于最小一乘准则的三次样条函数法应用于拟合在上海证券交易所交易的国债的利率期限结构,并与传统的最小二乘法进行比较。样本外预测结果显示,稳健的最小一乘方法能有效的降低异常点的干扰,弥补最小二乘法的不足,提高预测的精度。     

基于约束总体最小二乘方法的近似消逝理想算法

提出了基于约束总体最小二乘方法的近似消逝理想算法.给定经验点集Xε,该算法输出序理想(O)和多项式集合(g).当(O)中单项的个数等于经验点集Xε的基数时,(g)即为Xε的近似消逝理想基.该算法充分考虑赋值向量的扰动之间的内在联系,因此在关注向量的数值相关性方面,算法优于目前其它同类算法.     

变量有界半定最小二乘问题

<正>1引言设A_i∈S~n,i=1,…,m,定义线性算子A:S~n→R~m,AX=(A_1·X,…,A_m·X)~T,其相应的伴随算子为A~*:R~m→S~n,且A~*y=sum from i=1 to my_iA_i.X∈S~n,b∈R~m.Malick.J在[6]中讨论了如下标准半定最小二乘问题(SDLS):     

基于现场可编程门阵列和大功率LED阵列光源的小型化水下无线光通信系统的研究与实现

针对水下无线通信高速率、远距离、低成本和小型化设备的实用需求,本文设计研制了一种高鲁棒性的基于现场可编程门阵列(FPGA)和大功率LED阵列的小型化水下无线光通信系统。其光发射机的光源采用45 W大功率LED阵列,基于FPGA实现高阶调制与编码,并设计了准直光学发射天线有效减少光束发散角,大幅度延长了传输距离。在光接收端,设计了一种基于3 mm大孔径雪崩光电二极管(APD)的自动增益控制放大和FPGA解调与信号处理的光接收机,降低了光通信系统对准的严苛要求。该系统可实现30 Mbps开关键控(OOK)信号和正交幅度调制(QAM)信号(16QAM信号)的12 m水下信道实时传输,二者的误码率(BER)分别为2.467×10^-4和3.467×10^-3。此外,该系统还实现了22 Mbps的非归零(NRZ)-OOK整形信号12 m水下+30 m空气的跨介质传输(总长度为42 m),BER为3.619×10^-4。最后,实现了12 m水下信道中接收机偏离主光轴40°之内22 Mbps OOK信号的有效接收,提高了系统的鲁棒性。