A new approach to the synthesis of 4-(N-aryl)carbamoylmethyl-4,5-dihydropyridazin-3(2H)-ones

Reaction of N-aryl substituted maleimides with aliphatic ketazines leads to the formation of 4,5-dihydropyridazin-3(2H)-ones in moderate yields. The reaction proceeds through 1,4-addition of an azine to the maleimide double bond, as confirmed by separation of the corresponding adducts in some cases, which are then converted into 4,5-dihydropyridazin-3(2H)-ones. In addition, the solid-state synthesis of 4,5-dihydropyridazin-3(2H)-ones is demonstrated for the first time.     

CuFe2O4 nanoparticles: a magnetically recoverable and reusable catalyst for the synthesis of 5-substituted 1H-tetrazoles

An efficient and economical protocol for the synthesis of 5-substituted 1H-tetrazoles from various nitriles and sodium azide is described using magnetically recoverable and reusable CuFe₂O₄ nanoparticles. A wide variety of aryl nitriles underwent [2+3] cycloaddition under mild reaction conditions to afford tetrazoles in good to excellent yields. The catalyst was magnetically separated and reused five times without significant loss of catalytic activity.     

An alternative quinoline synthesis by via Friedländer reaction catalyzed by Yb(OTf)3

Quinolines have been synthesized in very good yields from 2-aminoarylketones and differently substituted carbonyl compounds in the presence of Yb(OTf)₃ as the catalyst. The method is applicable to both cyclic and acyclic carbonyl compounds with only slight differences in the experimental procedure.     

原位水热合成SrTiO3/TiO2复合纳米纤维及光催化性能

以利用静电纺丝技术制备的TiO2纳米纤维为模板和反应物,原位水热合成了具有异质结构的SrTiO3/TiO2复合纳米纤维.采用X射线衍射(XRD)、扫描电子显微镜(SEM)、能量散射光谱(EDS)、高分辨透射电子显微镜( HRTEM)和X射线光电子能谱(XPS)等测试手段对样品的结构和形貌进行了表征.用罗丹明B(RB)模...     

特殊形貌GdF3:Eu3+纳米发光材料的制备及性能

以PEG-2000、柠檬酸和甘氨酸为表面活性剂,采用水热法制备出扁平纳米棒、纳米花和纳米片状的GdF3∶Eu3+发光材料,并对其结构和性能进行了表征.XRD结果表明,所得样品均为正交晶系.FESEM照片表明,使用不同表面活性剂所制备的产物形貌不同.研究了以PEG-2000为表面活性剂时反应物浓度对产物形貌的影响,并对其生长机理进行了探讨.荧光光谱表明,在不同波长激发光的照射下,GdF3∶Eu3+纳米晶的最强发射峰均位于591 nm处,对应于Eu3+的5D0→7F1磁偶极跃迁.GdF3∶Eu3+的Gd3+-Eu3+之间发生了有效的能量传递.不同形貌样品的发光强度不同.     

Lu2O3纳米粉体和透明陶瓷中掺杂Nd3+的局域结构研究

利用扩展X射线吸收精细结构光谱(EXAFS)研究了不同掺杂浓度Nd3+:Lu2O3纳米粉体和透明陶瓷中Nd3+的局域结构.结果表明,在不同条件下Nd3+均以固溶取代Lu3+的方式进入Lu2O3基质晶格,掺杂Nd3+原子的第一配位键长约为0.225 nm,小于Nd2O3纳米粉中Nd-O第一近邻键长0.251 nm,而大于...     

新型三维开放骨架稀土硫酸盐[Ln4(H2O)4(SO4)10](C4N2H12)4(H2O)4(Ln=Gd,Eu)的合成、结构及荧光性质

以哌嗪为模板剂,在水-乙醇混合溶剂体系中溶剂热合成了两个具有三维开放骨架结构的稀土硫酸盐[Ln4(H2O)4(SO4)10](C4N2H12)4(H2O)4（Ln = Gd,化合物1和Eu,化合物2）,并对其进行了结构表征、热重以及荧光光谱分析. 单晶结构解析表明,化合物1和2属于同构异质,均结晶于单斜晶系,P21/c空间群,化合物1,a = 19.691(3) ?,b = 19.249(3) ?,c = 13.186(2) ?,β = 92.33(0)o,V = 4993.5(1) ?3, Z =4. 化合物2,a = 19.7233(8) ?,b = 19.2791(8) ?,c = 13.2095(5) ?,β = 92.329(1)o,V = 5018.7(3) ?3, Z =4. 两个化合物在ab平面上由SO4,GdO8和GdO9多面体共边或共角交错连接形成含有八元环和十六元环的二维层状结构,该二维层沿c方向平行排列,相邻层通过SO4四面体相连形成具有孔道的三维开放骨架结构,其孔道之中包含平衡骨架负电荷的质子化哌嗪分子. 化合物2的固体荧光光谱分析显示其在397nm激发波长下,表现出典型的Eu3+发光性质.       

中空Fe203/G-NS纳米复合材料的制备和储锂性能

以三氯化铁和氧化石墨烯(Graphite oxide,GO)为原料,采用水热法一步合成了中空Fe2O3/石墨烯(Graphene nanoslheet,GNS)纳米复合材料.研究结果表明,Fe2O3/GNS纳米复合材料的形成是由于Fe3+催化氧化GO中的羧基等官能团释放出CO2,并以原位形成的CO2气泡为模板形成了中空...     

特殊形貌GdF3:Eu3+纳米发光材料的制备及性能

以PEG-2000、柠檬酸和甘氨酸为表面活性剂,采用水热法制备出扁平纳米棒、纳米花和纳米片状的GdF3:Eu3+发光材料,并对其结构和性能进行了表征.XRD结果表明,所得样品均为正交晶系.FESEM照片表明,使用不同表面活性剂所制备的产物形貌不同.研究了以PEG-2000为表面活性剂时反应物浓度对产物形貌的影响,并对其...     

Ni-Fe/γ-Al2O3双金属催化剂的制备及其CO甲烷化性能研究

采用等体积浸渍法制备了Ni-Fe/γ-Al₂O₃双金属催化剂和Ni/γ-Al₂O₃、Fe/γ-Al₂O₃单金属催化剂,在连续流动微反装置上考察了催化剂的CO甲烷化催化活性,采用XRD、N₂物理吸附、H₂-TPR、H₂-TPD和TPSR等手段对催化剂进行表征。结果表明,Ni-Fe/γ-Al₂O₃双金属催化剂中Ni、Fe之间产生了明显的相互作用,还原后催化剂中形成Ni-Fe合金,对氢气吸附量显著增加。在CO体积分数为0.5%、空速5000h^-1、常压的反应条件下,Ni-Fe/γ-Al₂O₃双金属催化剂表现出高的甲烷化活性,220℃时将CO完全转化为甲烷。