陶瓷材料在压剪联合冲击加载下动态响应的实验研究

 应用57 mm压剪炮和双磁场IMPS粒子测试系统对95%的Al₂O₃陶瓷材料在压剪联合加载条件下的力学行为进行了实验研究，测量得到了材料内部压缩波（P波）、剪切波（S波）的加载、卸载和传播规律。对剪切波的衰减随载荷的变化进行了研究，初步得到95% Al₂O₃陶瓷材料在压剪联合载荷冲击下发生损伤的纵向应力阀值是4.86 GPa。     

Numerical Simulation on the Production Mechanism of Surface-Wave Plasmas Sustained along a Metal Rod

For interpreting the production mechanism of surface-wave plasmas sustained along a metal rod, electromagnetic simulation on the electromagnetic field distributions and particle-in-cell/Monte Carlo collision （PIC/MCC） simulation of the ionization process are present. The results show that the enhanced electric field of surface plasmon polaritons （SPPs） can be excited in the ion sheath layer between the negative-voltage metal rod and the surface-wave plasmas, which is responsible for maintaining the plasma discharge. Moreover, the spatio-temporal evolutions of plasma density and electric fields are simulated by the PIC/MCC model. It is further suggested that the expanded ion sheath layer can extend the length of plasma domain by increasing the plasma absorbed energy from SPPs.     

ROTATIONAL RESISTANCE AND SHEAR-INDUCED ANISOTROPY IN GRANULAR MEDIA

This paper presents a micromechanical study on the behavior of granular materials under confined shear using a three-dimensional Discrete Element Method （DEM）. We consider rotational resistance among spherical particles in the DEM code as an approximate way to account for the effect of particle shape. Under undrained shear, it is found rotational resistance may help to increase the shear strength of a granular system and to enhance its resistance to liquefaction. The evolution of internal structure and anisotropy in granular systems with different initial conditions depict a clear bimodal character which distinguishes two contact subnetworks. In the presence of rotational resistance, a good correlation is found between an analytical stress-force-fabric relation and the DEM results, in which the normal force anisotropy plays a dominant role. The unique properties of critical state and liquefaction state in relation to granular anisotropy are also explored and discussed.     

基于剪切效应纤维梁单元的结构非线性有限元数值模拟

基于Euler-Bernoulli梁理论的经典纤维模型忽略了剪切变形给截面带来的影响,为了得到更加精确的梁单元模型,该文基于考虑剪切效应的纤维梁单元,根据Timoshenko梁理论,推导了该纤维梁单元的刚度矩阵,并结合弹塑性增量理论,同时考虑了几何非线性和材料非线性的双重影响,建立了压弯剪复杂应力状态下结构非线性有限元...     

On continuum modeling using kinetic-frictional models in high shear granulation

This short communication demonstrates why extreme caution has to be taken when applying conven- tional kinetic-frictional closures to continuum modeling of high shear granulation （HSG）, Conventional models refer to closure laws where the kinetic and frictional stresses are summed up to obtain the total stress field, In the simple, dense, and sheared system ofa Couette shear cell, the effect of the lack of scale separation on the model predictions is examined, both quantitatively and qualitatively. It is observed that the spatial resolution has a significant effect on the magnitude of the kinetic and frictional contributions to the solid phase stresses. With this new investigation and previous studies of HSG, it is concluded that conventional kinetic-frictional models are inadequate for continuum modeling of HSG.     

非圆化磨耗激励下高速列车转向架区域噪声边频带产生机理及影响

该文通过对车辆噪声和车轮非圆化磨耗开展跟踪测试和分析,发现存在车轮非圆化磨耗的列车在运行过程中,其转向架区域噪声窄带频谱上会出现了以非圆化磨耗激励频率为中心,以过轨枕频率为间隔等间距分布的噪声峰值(即噪声边频带).这使得车轮非圆化磨耗不仅会影响其激励频率处的列车轨道结构的振动和噪声,还会对其他频段的噪声产生重要影响.为...     

董凡辰荣获《声学学报》2020年度优秀论文奖

根据《声学学报》优秀论文评选办法,经过《声学学报》编辑委员会两轮评选,编委会一致同意,决定授予董凡辰、胡治国、李整林的"南海深海典型不平整地形对声场垂直相关性的影响"(《声学学报》2020年第45卷第6期第785~800页)一文为《声学学报》2020年度优秀论文奖。编委会认为:董凡辰、胡治国、李整林的"南海深海典型不平整地形对声场垂直相关性的影响"(《声学学报》2020年第45卷第6期第785~800页)一文及其相关工作,对深海声场垂直相关特性受海底地形变化影响机理进行了深入研究。     

冲击波加载下TNT的初始反应路径及产物光谱特征研究

本文首先通过量子分子动力学方法结合多尺度冲击技术研究固相TNT晶体在冲击波加载下的初始分解反应路径及其产物组分变化.通过综合分析键长变化、电子布居和中间产物的存在寿命三个要素给出了不同冲击波速(3-15 km/s)下2类可能的初始分解路径:在低速冲击下(≤7 km/s),TNT发生部分分解和聚合,分解主要源于C-NO₂键的断裂,初始分解产物以NO₂为主;在高速冲击下(≥9 km/s)则发生完全分解,分解主要始于六元环的形成,即NO₂基团上的O与相邻CH₃基团上的H相结合,然后六元环被打破,生成了OH自由基,初始分解产物以CN、CO、C₂和OH为主.另外,根据模拟数据我们从理论上给出了TNT(ρ₀=1.7 g/cm~3)冲击Hugoniot关系为U_s=3.377+1.363 u.随后以分子光谱理论为基础,采用含时密度泛函理论获取这些主要分解产物的紫外可见吸收谱、荧光发射谱及振动分辨的荧光发射谱.此项研究有助于我们深入认识TNT高温高压状...     

Paraloid文物保护材料光老化的红外光谱研究

Paraloid(乳胶粘合剂)是一系列丙烯酸树脂的商品名称,是文物保护领域中最常用的保护材料之一,主要用于文物的加固、封护和粘接,适用文物材质范围非常广泛。其中以Paraloid B-72最具代表性,在国内外的文物保护中被大量使用,相关的应用案例、性能评价及其老化机理研究都有较多报道,而Paraloid系列的其他产品却鲜有关注,在国内应用较少,老化性能研究尚未开展工作。该研究系统评价了Paraloid B-72,Paraloid B-44,Paraloid B-48N和Paraloid B-67的光老化性能,采用红外光谱跟踪紫外辐照3 864 h过程中Paraloid材料分子结构变化,对光老化机理进行了深入解析和半定量评测。结果显示,4种Paraloid系列丙烯酸树脂材料中,B-72老化前后颜色和光泽度均没有发生明显变化,B-48N和B-67老化前后色差较大,B-44光泽度降低最多。丙烯酸树脂老化过程中高分子材料内部发生断链反应以及一定程度的交联反应,表现在主要官能团吸收的减弱和羰基指数（CI）的增加。根据主要官能团吸收峰C═O相对强度的半定量分析结果反映出,B-72的光稳定性最好,B-48N和B-44略优于B-67,但与B-72相比差距较大。B-67可能是由于异丁基上的叔氢键能较低,易吸收光能量后产生自由基氧化反应,因此耐光老化性最差。综合评定4种Paraloid系列丙烯酸树脂的光老化性能,B-72在4种材料中光稳定性最好,其次是B-44和B-48N,最不适宜作为户外文物保护材料的是B-67。研究结论有望为一线文物保护工作者在选择Paraloid丙烯酸树脂作为保护材料时提供一定的科学参考。