不同聚合物对纳米SiO2表面改性的研究进展

纳米SiO2由于具有无味、无毒、无污染等特性,因而被广泛用作无机纳米填料。纳米SiO2极易团聚,从而限制了它的广泛应用。但纳米SiO2表面富含大量的硅羟基,可对其进行表面改性。纳米SiO2表面改性的方法较多,主要有表面物理改性和表面化学改性两种,其中表面化学改性中又以聚合物改性的效果最好。本文综述了国内外利用不同的聚合物——亲水性、疏水性和两亲性聚合物对纳米SiO2表面的化学改性,并对其应用进行了分析,展望了其发展前景。     

3D amorphous carbon and graphene co-modified LiFePO4 composite derived from polyol process as electrode for high power lithium-ion batteries

Amorphous carbon and graphene co-modified LiFePO_4 nanocomposite has been synthesized via a facile polyol process in connection with a following thermal treatment.Various characterization techniques,including XRD.Mossbauer spectra,Raman spectra,SEM,TEM,BET,O_2-TPO,galvano charge-discharge,CV and EIS were applied to investigate the phase composition,carbon content,morphological structure and electrochemical performance of the synthesized samples.The effect of introducing way of carbon sources on the properties and performance of LiFePO_4/C/graphene composite was paid special attention.Under optimized synthetic conditions,highly crystalized olivine-type LiFePO_4was successfully obtained with electron conductive Fe_2P and FeP as the main impurity phases.SEM and TEM analyses demonstrated the graphene sheets were randomly distributed inside the sample to create an open structured LiFePO_4 with respect to graphene,while the glucosederived carbon mainly coated over LiFeP04 particles which effectively connected the graphene sheets and LiFePO_4 particles to result in a more efficient charge transfer process.As a result,favorable electrochemical performance was achieved.The performance of the amorphous carbon-graphene co-modified LiFePO_4 was further progressively improved upon cycling in the first 200 cycles to reach a reversible specificcapacity as high as 97 mAh·g~(-1) at 10 C rate.     

Modified Boussinesq System with Variable Coefficients： Classical Lie Approach and Exact Solutions

The Lie-group formalism is applied to investigate the symmetries of the modified Boussinesq system with variable coefficients. We derived the infinitesimals and the admissible forms of the coefficients that admit the classical symmetry group. The reduced systems of ordinary differential equations deduced from the optimal system of subalgebras are further studied and some exact solutions are obtained.     

甲烷在清洁 Pd(111) 及氧改性的 Pd(111) 表面解离的密度泛函理论研究

 采用广义梯度近似 (GGA) 的密度泛函理论 (DFT) 并结合平板模型, 研究了 CH4 在清洁 Pd(111) 及 O 改性的 Pd(111) 表面发生 C朒 键断裂的反应历程. 优化了裂解过程中反应物、过渡态和产物的几何构型, 获得了反应路径上各物种的吸附能及反应的活化能. 结果表明, CH4 采用一个 H 原子指向表面的构型在 Pd(111) 表面的顶位吸附, CH3 的最稳定的吸附位置为顶位, OH, O 和 H 的最稳定吸附位置均为面心立方. CH4 在清洁 Pd(111) 表面裂解的活化能为 0.97 eV, 低于它在 O 原子改性 (O 没有参与反应) 的 Pd(111) 表面的活化能 1.42 eV, 说明表面氧原子抑制了 CH4 中 C朒 键的断裂. 当亚表面 O 原子和表面 O 原子 (O 参与反应) 共同存在时, C朒 键断裂的活化能为 0.72 eV, 低于只有表层氧存在时的活化能 (1.43 eV), 说明亚表面的 O 原子对 CH4 分子的活化具有促进作用. CH4 在 O 原子改性的 Pd(111) 表面裂解生成 CH3 和 H, 以及生成 CH3 和 OH 的反应活化能分别为 1.42 和 1.43 eV, 说明 CH4 在 O 原子改性的 Pd(111) 表面发生这两种反应的难易程度相当.     

海藻酸钠的疏水改性及释药性能研究

为了提高对疏水性药物的负载量和缓释作用,将海藻酸钠氧化后与十二胺反应使其进行疏水改性.对改性后聚合物结构进行了表征.研究了聚合物在水溶液及盐溶液中的粘度变化;将聚合物分散于NaCl/CaCl2的混合溶液中制备成凝胶微球,对药物布洛芬进行了包埋释放实验.结果表明,疏水改性后的海藻酸钠粘度增加,其凝胶微球对布洛芬负载量提高,具有较好的缓释作用.     

环氧改性水性聚氨酯乳液的制备及其膜性能

以聚己内酯二元醇(CAPA)为软段,异佛尔酮二异氰酸酯(IPDI)和六亚甲基二异氰酸酯(HDI)为硬段,环氧树脂E-44为大分子交联剂,经相转化法合成了一系列环氧树脂改性负离子水性聚氨酯(EPPU)自乳化乳液,并制备了改性水性聚氨酯的固化膜.通过FTIR、TGA及接触角、力学性能测试对聚合物结构及其膜性能进行了研究.通过原子力显微镜(AFM)观察膜表面形态和表面粗糙度.乳液粒径及粒径分布通过动态激光光散射法(DLLS)测定.FTIR分析表明环氧树脂的羟基和环氧基都参与了发应.TGA表明,环氧树脂的加入可以提高聚氨酯的热稳定性.随着w(E-44)增大,改性聚氨酯膜的拉伸强度得到改善,断裂伸长率减小.随着w(E-44)增大,乳液粒径增大,薄膜的接触角增大,改性后的PU膜表面光滑度下降,拒水性增强.     

氧化锰表面改性活性炭电极材料的电化学特性

用Mn(NO3)2溶液浸渍-高温热解法对普通活性炭进行表面改性处理以改善其电化学性能. 采用氮气吸附、SEM、XRD等方法研究改性活性炭的比表面积、孔结构、形貌和氧化锰的晶体结构; 用循环伏安、恒流充放电、交流阻抗等电化学方法研究了改性活性炭电极构成的电化学电容器的性能. 结果表明, Mn(NO3)2热解产生的多价态氧化锰有法拉第赝电容效应, 尤其是立方晶形结构的α-Mn2O3, 与活性炭的双电层电容构成了复合电容, 因而改性炭材料的比电容有明显的提高, 其质量比电容达到254 F·g-1, 比未改性炭的165 F·g-1提高了54%. 改性炭电极电化学电容器具有优异的充放电可逆性和稳定性, 而且等效串联电阻较小, 只有0.40 Ω; 经2000次循环的长期测试, 容量保持率几乎达到100%.     

改性L石催化苯酚羟基化反应的应用

以L沸石为载体,分别采用浸渍法和离子交换法制备了Cu/L催化剂,并应用于苯酚羟基化反应.在苯酚与双氧水摩尔比等于3的条件下详细考察了反应时间、反应温度、L沸石酸碱性以及Cu的负载量和负载方法等因素对反应的影响.结果表明:采用浸渍法制备的催化剂比离子交换法制备的催化剂具有更高的活性,而且增加催化剂酸量或者升高反应温度均有利于提高苯酚转化.在最佳反应条件下,反应2h苯酚转化率为24.0%,苯二酚选择性为71.4%,其中n(邻苯二酚)/n(对苯二酚)为1.22.     

Highly active catalyst for vinyl acetate synthesis by modified activated carbon

A new zinc acetate catalyst which was prepared from modified activated carbon exhibited extreme activity towards the synthesis of vinyl acetate.The activated carbon was modified by nitric acid,vitriol and peroxyacetic acid(PAA).The effect on specific area, structure,pH and surface acidity groups of carriers by modification was discussed.Amount of carbonyl and carboxyl groups in activated carbon was increased by peroxyacetic acid treatment.The productivity of the new catalyst was 14.58%higher than that of...