用于飞秒时间分辨分子反应动力学研究的千赫兹离子/电子速度成像仪

A new velocity map imaging spectrometer is constructed for molecular reaction dynamics studies using time-resolved photoelectron/ion spectroscopy method.By combining a kHz pulsed valve and an ICCD camera,this velocity map imaging spectrometer can be run at a repetition rate of 1 kHz,totally compatible with the fs Ti:Sapphire laser system,facilitating time-resolved studies in gas phase which are usually time-consuming.Time-resolved velocity map imaging study of NH₃ photodissociation at 200 nm was performed and the time-resolved total kinetic energy release spectrum of H+NH₂ products provides rich information about the dissociation dynamics of NH₃.These results show that this new apparatus is a powerful tool for investigating the molecular reaction dynamics using time-resolved methods.     

放射性碘分子在Cu2O表面的吸附:第一性原理密度泛函研究

采用第一性原理密度泛函计算方法和周期性平板模型系统研究了放射性碘分子在Cu₂O三个低指数表面的吸附行为。通过计算若干平衡吸附构型的结构参数和吸附能评估了不同特征吸附位的作用。构型优化计算表明所选晶面存在适度的结构弛豫。计算结果表明,与Cu₂O（110）表面相比,Cu₂O（100）和（111）晶面表现出更高的碘分子吸附反应活性。其中,表面氧原子位（O_S）和配位未饱和铜原子位（Cu_CUS）分别为Cu₂O（100）和（111）晶面的能量最优吸附位点。此外,针对几种典型吸附结构计算分析了其电子结构信息,以进一步阐明吸附体系之间的相互作用机理。     

超临界CO2直旋混合射流破岩特性的实验研究

超临界二氧化碳(CO₂)射流破岩既能降低岩石门限压力又能有效保护储层,直旋混合射流兼具直射流和旋转射流特点可提高破岩效率,基于此提出了超临界CO₂直旋混合射流的破岩方法。为了揭示超临界CO₂直旋混合射流破岩特性,设计加工出叶轮式直旋混合射流喷嘴,通过岩石定点冲击破碎实验对比了该射流与常规水射流的破岩效果,并研究了叶轮长度、叶轮中心孔直径、混合腔长度、喷射距离、射流压力等重要参数对超临界CO₂直旋混合射流破岩效果的影响。结果表明:相同实验条件下,该射流方法的平均破岩能力比常规水射流提高了42.9%;超临界CO₂直旋混合射流破岩易出现较大体积岩屑崩落现象;随着叶轮长度、混合腔长度、喷射距离的增大破岩效果均先增强后减弱,实验条件下上述参数存在最优范围值;叶轮中心孔直径的增大会导致岩石破碎孔深度增加、直径减小;随着射流压力的升高,超临界CO₂直旋混合射流破岩效果有着较为明显的提升。研究结果可为超临界CO₂直旋混合射流破岩方法的进一步研究提供实验依据。     

压力机下死点定位精度的检测及评价方法研究

设计一种粗-细二级调节相结合的装置来动态地测量压力机的下死点, 可以方便准确地测量不同工作冲程时的下死点位置. 针对所测数据, 结合模糊判断法和层次分析法构造压力机下死点精度的综合评价指标, 来对压力机下死点定位精度进行分析与评价. 评价步骤通过选择评价因素和构建评价集, 确定比较矩阵并计算各影响因素权重, 以确立模糊评价矩阵, 并通过综合评价模型判断下死点精度等级. 结果表明, 该评价方法可有效地评价压力机的定位精度.     

Nonlinear modes in rotating double well potential with parity–time symmetry

We investigate the nonlinear modes in a rotating double well potential with 79T symmetry. Focus on the existence and stability of the nonlinear PT modes in this system, we found that five types of PT modes can stably exist by given certain parameter settings. The multistable area between these modes are studied numerically and the bistable and tristable areas are delimited. With different input trial wavefunctions, five types of solitary wave modes are identified. We found that the rotating of the potential can significantly affect the power flow of the fundamental harmonic mode, whose effect is absent for the other modes.     

超声波震荡法及润湿性增强法对单晶硅阶梯光栅闪耀面粗糙度的影响

单晶硅阶梯光栅闪耀面表面粗糙度会引起入射光的散射形成杂散光,为获得低杂散光的阶梯光栅槽形,减小单晶硅阶梯光栅闪耀面表面粗糙度显得尤为重要。在单晶硅湿法刻蚀工艺中,阶梯光栅闪耀面表面粗糙度较大的原因是反应生成的氢气易在硅片表面停留,形成虚掩模,阻碍反应的进一步进行。基于超声波空化作用及异丙醇(IPA)增加单晶硅表面润湿性的原理,在单晶硅湿法刻蚀制作阶梯光栅工艺过程中分别利用超声波震荡法及润湿性增强法对所制阶梯光栅闪耀面表面粗糙度进行改善。利用超声波震荡法所制阶梯光栅闪耀面表面粗糙度小于15nm,利用润湿性增强法所制阶梯光栅闪耀面表面粗糙度小于7nm。同时施以超声波震荡法和润湿性增强法,在异丙醇质量分数范围为5%~20%,超声波频率为100kHz,功率范围为30~50 W时,所制阶梯光栅闪耀面表面粗糙度小于2nm,而且当异丙醇质量分数为20%、超声波频率为100kHz以及超声波功率为50W时,所制中阶梯光栅闪耀面表面粗糙度达到1nm。实验结果表明,同时施以超声波震荡法及润湿性增强法,并优化实验参数可以制备更低粗糙度的阶梯光栅。     

Description of the shape evolution in the yrast states of 186Pt

¹⁸⁶Pt was tested in the framework of IBM-1 and the X(3) model. The results show that ¹⁸⁶Pt is located close to the shape phase transition point, but the B(E2) values little agree with the X(3) model. The shape evolution in the yrast states of ¹⁸⁶Pt is also discussed in detail. TRS calculation exhibits a flat bottomed potential at low spin states, but a relatively deep minimum at high spin states. It suggests that a shape evolution from vibrational mode to rotational mode happens in ¹⁸⁶Pt. The result is in agreement with the E-GOS calculation.     

凸面光栅成像光谱仪全视场自动化光谱定标系统设计

为了确定凸面光栅成像光谱仪的光谱特性,需要对凸面光栅成像光谱仪进行光谱定标。基于单色准直光法设计了一套全视场光谱定标系统,引入球面镜提供准直光,采用一块可以自由滑动和转动的折转镜改变定标光线的入射角,实现了全谱段自动化光谱定标。运用光学设计软件CODEV对光谱定标系统进行了部分光学模拟,证明了整个系统的可靠性。结合光谱定标系统的结构和特点,对整个光谱定标系统进行了精度分析。理论分析结果表明,该系统的光谱定标精度优于1%。该定标系统具有体积小、通用性强等特点,可为其他成像光谱仪的光谱定标提供参考。     

Non-Rayleigh photon statistics of superbunching pseudothermal light

Superbunching pseudothermal light has important applications in studying the second-and higher-order interference of light in quantum optics.Unlike the photon statistics of thermal or pseudothermal light is well understood,the photon statistics of superbunching pseudothermal light has not been studied yet.In this paper,we will employ single-photon detectors to measure the photon statistics of superbunching pseudothermal light and calculate the degree of second-order coherence.It is found that the larger the value of the degree of second-order coherence of superbunching pseudothermal light is,the more the measured photon distribution deviates from the one of thermal or pseudothermal light in the tail part.The results are helpful to understand the physics of two-photon superbunching with classical light.It is suggested that superbunching pseudothermal light can be employed to generate non-Rayleigh temporal speckles.     

Temperature dependence of spin pumping in YIG/NiOx/W multilayer

We report the temperature dependence of the spin pumping effect for Y₃Fe₅O₁₂ (YIG, 0.9 μm)/NiO (t_NiO)/W (6 nm) (t_NiO = 0 nm, 1 nm, 2 nm, and 10 nm) heterostructures. All samples exhibit a strong temperature-dependent inverse spin Hall effect (ISHE) signal I_c and sensitivity to the NiO layer thickness. We observe a dramatic decrease of I_c with inserting thin NiO layer between YIG and W layers indicating that the inserting of NiO layer significantly suppresses the spin transport from YIG to W. In contrast to the noticeable enhancement in YIG/NiO (t_NiO ≈ 1-2 nm)/Pt, the suppression of spin transport may be closely related to the specific interface-dependent spin scattering, spin memory loss, and spin conductance at the NiO/W interface. Besides, the I_c of YIG/NiO/W exhibits a maximum near the T_N of the AF NiO layer because the spins are transported dominantly by incoherent thermal magnons.