PW11M(M=Cu、Co)@TiO2多相催化剂的制备及氧化脱硫性能

摘要：以过渡金属(Cu, Co)取代磷钨酸为模板剂,硫酸钛为钛源,通过一步模板法合成出一类多酸基PW11M(M=Cu、Co)@TiO2材料,采用FT-IR、XRD、XPS、Raman、SEM和TEM表征手段对材料进行了结构表征. 结果表明,PW11M(M=Cu、Co)被引入到TiO2中,形成了球形核壳结构. N2吸附-脱附测试表明,PW11Co@TiO2具有介孔结构:孔径大小为3.3 nm,比表面积为72.4 m2/g. 在以H2O2为氧化剂,乙腈为溶剂的氧化脱硫反应体系中考察了其催化活性,结果表明：复合材料PW11M(M=Cu、Co)@TiO2表现出良好的催化性能. 其中催化剂PW11Co@TiO2在投入量为40 mg,反应底物为500 ppm,反应温度60 oC,反应40 min后,DBT的脱硫率达到99.7%. 中断和循环实验表明,催化剂PW11Co@TiO2具有良好的稳定性,在相同的反应条件下,循环反应5次后,催化剂的催化活性没有明显下降.     

三乙醇胺改性Cu/Zn/Al类水滑石衍生氧化物催化合成气制备低碳醇

采用共沉淀法制备Cu/Zn/Al类水滑石前驱体,并用配体三乙醇胺(TEA)对其进行改性。前驱体经焙烧后成功获得TEA改性的Cu/Zn/Al催化剂。借助XRD、FTIR、H2-TPR、CO-TPD及SEM等方法对催化剂进行表征,并将其应用于合成气制备异丁醇的活性评价反应中。结果表明,TEA的加入能够改变催化剂形貌,使催化剂表面呈松散絮状结构。TEA可使类水滑石前驱体的结构发生膨胀,其焙烧获得的催化剂中有明显的晶格扭曲和晶格缺陷。TEA对催化剂结构的改变有利于Cu/Zn/Al催化剂中CuO组分的氢还原和CO在催化剂表面的化学吸附,从而促进异丁醇的合成。当TEA的添加比例为nTEA/nZn=0.5时,TEA改性的Cu/Zn/Al催化剂的催化效果达到最佳。     

Design and simulation of the wire scanner for the injector linac of BEPCⅡ

BEPCⅡ, the upgrade project of Beijing Electron Positron Collider (BEPC), is an accelerator with large beam current and high luminosity, so an efficient and stable injector is required. Several beam diagnostic and monitoring instruments are used. A new diagnostic instrument — wire scanner, has been designed and will be used to measure the profile of the linac beam of BEPCⅡ. This paper describes the prototype of this system and the cause of heat generating of the wire. Some simulation results of the heat and force by using finite element method software—ANSYS^®,2) are presented and discussed.     

碱金属氟化物对掺Yb~(3+)氟磷酸盐玻璃析晶稳定性和光谱性质的影响

研究了碱金属氟化物对掺Yb3 氟磷玻璃的光谱性质和析晶稳定性能的影响.运用倒易法计算了Yb3 的发射截面.结果显示,LiF的引入对吸收和发射截面的提高作用较大并出现最佳引入量极值,其次为KF.碱金属氟化物的引入可提高二元体系的析晶稳定性能,使玻璃网络结构得到改善;拉曼光谱显示二元体系中引入YbF<,3>后玻璃网络结构得到增强,而在引入碱金属氟化物的三元体系中掺杂YbF<,3>后破坏了网络完整性,降低系统析晶稳定性能.     

Nitrogen Dioxide Sensing Properties and Mechanism of Copper Phthalocyanine Film

Copper phthalocyanine film, a p-type organic semiconductor, is synthesized by vacuum sublimation and its surface morphology is characterized by SEM. A silicon-based copper phthalocyanine film gas sensor for NO2 detection is fabricated by MEMS technology. The results show that the resistance and sensitivity of copper phthalocyanine film decrease obviously as the NO2 concentration increases from Oppm to lOOppm. However, the sensitivity nearly keeps a constant of O. 158 between 30 ppm and 70 ppm. The best working temperature of the gas sensor is 90℃ for NO2 gas concentrations of lOppm, 20ppm and 30ppm, which is much lower than that of general metal oxide gas sensor.     

QuEChERS-超高效液相色谱串联质谱法快速测定婴幼儿奶粉中5种黄曲霉毒素含量

建立QuEChERS-超高效液相色谱串联质谱法(UPLC-MS/MS)快速测定婴幼儿奶粉中5种黄曲霉毒素的方法.样品采用QuEChERS法提取之后,使用分散式固相萃取管(EMR-Lipid dSPE)进行净化,选择ACQUITY BEN C18色谱柱(1.7μm,2.1 mm×100 mm)分离,多反应监测采集模式(M...     

Conformational change-modulated spin transport at single-molecule level in carbon systems

Controlling the spin transport at the single-molecule level, especially without the use of ferromagnetic contacts, becomes a focus of research in spintronics. Inspired by the progress on atomic-level molecular synthesis, through first-principles calculations, we investigate the spin-dependent electronic transport of graphene nanoflakes with side-bonded functional groups, contacted by atomic carbon chain electrodes. It is found that, by rotating the functional group, the spin polarization of the transmission at the Fermi level could be switched between completely polarized and unpolarized states. Moreover, the transition between spin-up and spin-down polarized states can also be achieved, operating as a dual-spin filter. Further analysis shows that, it is the spin-dependent shift of density of states, caused by the rotation, that triggers the shift of transmission peaks, and then results in the variation of spin polarization. Such a feature is found to be robust to the length of the nanoflake and the electrode material, showing great application potential. Those findings may throw light on the development of spintronic devices.     

Ru-Fe二元金属纳米粒子对氧还原的电催化性能

在1,6-己二醇溶剂中,以Ru3(CO)12和Fe3(CO)12为原料,采用低温回流方法合成了Ru-Fe纳米粒子催化剂。利用扫描电镜(SEM)、X射线衍射仪(XRD)和电化学技术表征了催化剂的物理特征和电催化性能.催化剂粉末以六方结构的Rux簇为主相,呈现出高度均匀而聚集的纳米颗粒特征.在0.5mol/L H2SO4溶液中,Ru-Fe催化剂对氧还原反应(ORR)的电催化活性高于Rux,主要归因于d电子从Ru原子到Fe原子的转移过程.     

改变激发环境调控Ho3+离子的上转换发光特性

稀土掺杂上转换发光材料的发光特性不仅依赖于基质材料本身,而且与其激发条件密切相关.本文主要是以Ho^3+离子为研究对象,在NaYF4和LiYF4这两种不同的基质中,研究其在不同激发条件下的上转换发光特性.通过共聚焦显微光谱测试系统,对比Ho^3+离子在NaYF4和LiYF4微米晶体中的发光特性.实验结果发现:Ho^3+离子在这两种不同基质中均展现出较强的荧光发射.然而,当激发功率增加时,在单颗粒个LiYF4微米晶体中,当激发功率增加时,Ho^3+离子则发射出较强绿光及微弱的红光,红绿比变化并不明显,其蓝光发射强度也相对较弱.当激发这两种微米粉末晶体时,结果发现:Ho^3+离子均发射较强的绿光发射并伴有微弱红光发射,两种晶体中的发射特性极其相似.由此可见,在常规测试条件下,一些特殊发光现象是很难被观测到的.同时,通过对其光谱特性的分析,对Ho^3+离子的发光机理进行了研究.