Monitoring formation of poly(neutral red) film by EQCM

An electrochemical quartz crystal microbalance (EQCM) is employed for monitoring the growth of poly(neutral red) films on platinum in the electrolytic solution containing 5.0 mmol dm⁻³ neutral red, 0.3 mol dm⁻³ H₂SO₄, and 0.5 mol dm⁻³ Na₂SO₄. The in situ measurement of the frequency changes of the EQCM reveals that both the adsorption/desorption of neutral red and the formation of poly(neutral red) film can be observed together with anion sorption/desorption during the redox transformation of the polymer, and that the polymerization rate of neutral red increases slowly before the 11th cycle and then increases quickly with increasing number of potential cycles. Published in Russian in Elektrokhimiya, 2007, Vol. 43, No. 3, pp. 284–289. The text was submitted by the authors in English.     

Affinity interactions between phenylboronic acid-carrying self-assembled monolayers and flavin adenine dinucleotide or horseradish peroxidase

A method is provided for the recognition of glycated molecules based on their binding affinities to boronate-carrying monolayers. The affinity interaction of flavin adenine dinucleotide (FAD) and horseradish peroxidase (HRP) with phenylboronic acid monolayers on gold was investigated by using voltammetric and microgravimetric methods. Conjugates of 3-aminophenylboronic acid and 3,3'-dithiodipropionic acid di(N-hydroxysuccinimide ester) or 11-mercaptoundecanoic acid were prepared and self-assembled on gold surfaces to generate monolayers. FAD is bound to this modified surface and recognized by a pair of redox peaks with a formal potential of -0.433 V in a 0.1 M phosphate buffer solution, pH 6.5. Upon addition of a sugar to the buffer, the bound FAD could be replaced, indicating that the binding is reversible. Voltammetric, mass measurements, and photometric activity assays show that the HRP can also be bound to the interface. This binding is reversible, and HRP can be replaced by sorbitol or removed in acidic solution. The effects of pH, incubation time, and concentration of H(2)O(2) were studied by comparing the catalytic reduction of H(2)O(2) in the presence of the electron-donor thionine. The catalytic current of the HRP-loaded electrode was proportional to HRP concentrations in the incubation solution in the range between 5 microg mL(-1) and 0.1 mg mL(-1) with a linear slope of 3.34 microA mL mg(-1) and a correlation coefficient of 0.9945.     

The α-β inversion in submilligram particles of natural quartz

The bacground to the supposed development of the ‘Beilby layer’ on fine-grinding quartz is briefly reviewed. It is shown, using single crucible thermal analysis and sub-milligram DTA, that grinding quartz can cause a dispersion of the α-β inversion over a temperature range of several degrees; this is a crystallographic effect rather than an impurity effect. The sub-milligram DTA apparatus used is described and some thermal effects, such as impurity zoning, are illustrated.     

Mass tranfer of ions and solvent at redox processes in poly-3,4-ethylenedioxythiophene films

The work presents the data on mass transfer at the interface of the poly-3,4-ethylenedioxythiophene film with different propylene carbonate electrolyte solutions (TBAPF₆, LiClO₄, NaClO₄, TBAClO₄, TBABF₄) obtained using the quartz microgravimetry method in combination with cyclic voltammetry. It is shown that two parts of different nature can be observed in the region of electric activity of poly-3,4-ethylenedioxythiophene films on Δm, ΔQ curves. They evidence the change in mass transfer conditions at achieving different film oxidation degrees.     

Investigation of ionene adsorption on quartz surfaces by thermal-lens spectrometry

Thermal-lens spectrometry was used for the investigation of the adsorption of ionene to quartz surfaces. The thermooptical analysis of the surface makes it possible to distinguish the modified surface from a clean quartz surface and to provide sensitive direct concentration measurements of the light absorbing co-adsorbed substance. The co-adsorption of chromate ions and 2,10-ionene from aqueous solutions to quartz surfaces was investigated and the desorption procedure proposed.     

Detection of Tumor Necrosis Factor Gene by Piezoelectric Nucleic Acid Sensor

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｇｅｎｅｄｉａｇｎｏｓｉｓｔｅｃｈｎｏｌｏｇｙ ,ａｌｓｏｃａｌｌｅｄｎｕｃｌｅｉｃａｃｉｄｐｒｏｂｅｔｅｃｈｎｏｌｏｇｙ ,ｈａｓｂｅｃｏｍｅａｎａｔｔｒａｃｔｉｖｅｍｅｔｈｏｄｉｎｔｈｅｆｉｅｌｄｓｏｆｂｉｏｃｈｅｍｉｓｔｒｙａｎｄｃｌｉｎｉｃａｌｍｅｄｉｃｉｎｅ .Ｉｔｉｓｐｒｏｖｅｄｔｏｂｅｃｏｎｖｅｎｉｅｎｔａｎｄｓａｆｅｕｓｉｎｇｎｏｎ ｒａｄｉｏａｃｔｉｖｅｒｅａｇｅｎｔｓｗｉｔｈｅｌｅｃｔｒｏｃｈｅｍｉｃａｌａｎｄｏｐｔｉｃａｌｄｅｔｅｃｔｏｒ.Ｅｓｐｅ ｃ…     

Vacuum Ultraviolet Photolysis of Polyethylene,Polypropylene, and Polystyrene

Using infrared reflection absorption spectroscopy (IRRAS), quartz crystal microbalance (QMB) measurements, and X-ray photoelectron spectroscopy (XPS) in combination with chemical derivatization techniques the VUV photolysis of polyethylene (PE), polypropylene (PP), and polystyrene (PS) was investigated. A mass balance obtained from the quantification of the data was used to suggest reaction path ways. Although PE and PP behave similar, the mass loss is about 8 times higher in the case of PP. These differences originate from the higher disproportionation to recombination ratio for the branched polymer. Both polymers form double bonds and at extended treatment times they tend to crosslink. PS is rather stable due to the possibility of the energy dissipation by fluorescence.     

Piezoelectric transmission spectroelectrochemistry with a normal piezoelectric quartz crystal as an optically-transparent electrode

Piezoelectric transmission spectroelectrochemistry (PTSEC), i.e., the combination of electrochemistry and spectroelectrochemistry (SEC) with electrochemical quartz crystal microbalance (EQCM) technique is reported by using a normal piezoelectric quartz crystal (PQC) as an optically-transparent electrode (OTE). A theoretical relationship between the PQC response and the spectroelectrochemical response is derived and used to estimate the apparent molar absorptivity of the absorbing species deposited on the OTE on the PQC surface. The complex of copper with aspartic acid is used to test this new PQC-SEC technique. Results show that the combination of three such diverse techniques provides a very useful methodology for studying electrode processes and electrode surface characteristics in situ.     

石英晶体微天平技术研究纳米TiO_2表面Cu(Ⅱ)吸附与光化学还原过程

环境中排放的重金属离子Cu!对水生和陆生生物有强的毒害性。饮用水中Cu!的浓度高于1.0mg·L-1时,将会导致人畜得血色沉着病和胃肠粘膜病[1]。Cu!无法进行生物降解,除去废水中Cu!的常见方法有离子交换、置换、化学沉淀等[2],然而这些方法需要消耗大量的化学试剂,成本高。近来,研