Random poly(fluorenylene‐vinylene)s containing 3,7‐Dibenzothiophene‐5,5‐dioxide units: Synthesis,photophysical, and electroluminescence properties

The synthesis of new random poly(arylene‐vinylene)s containing the electron withdrawing 3,7‐dibenzothiophene‐5,5‐dioxide unit was achieved by the Suzuki–Heck cascade polymerization reaction. The properties of poly[9,9‐bis(2‐ethylhexyl)‐2,7‐fluorenylene‐vinylene‐co‐3,7‐dibenzothiophene‐5,5‐dioxide‐vinylene] (50/50 mol/mol, P1 ) and poly[1,4‐bis(2‐ethylhexyloxy)‐2,5‐phenylene‐vinylene‐co‐3,7‐dibenzothiophene‐5,5‐dioxide‐vinylene] (50/50 mol/mol, P2 ) were compared with those of terpolymers obtained by combining the fluorene, dibenzothiophene, and 1,4‐bis(2‐ethylexyloxy)benzene in 20/40/40 ( P3 ), 50/25/25 ( P4 ), and 80/10/10 ( P5 ) molar ratios. The polymers were characterized by ¹H NMR and IR, whereas their thermal properties were investigated by TGA and DSC. Polymers P1–5 are blue–green emitters in solution (λ_em between 481 and 521 nm) whereas a profound red shift observed in the solid state is emission (λ_em from 578 to 608 nm) that can be attributed both to the charge transfer stabilization exerted by the polar medium and to intermolecular interactions occurring in the solid state. Cyclic voltammetry permitted the evaluation of the ionization potentials and also revealed a quasi‐reversible behavior in the reduction scans for the polymers ( P1–4 ) containing the higher amounts of 3,7‐dibenzothiophene‐5,5‐dioxide units. Electroluminescent devices with both ITO/PEDOT‐PSS/ P1–5 /Ca/Al (Type I) and ITO/PEDOT‐PSS/ P1–5 /Alq₃/Ca/Al (Type II) configuration were fabricated showing a yellow to yellow–green emission. In the case of P4 , a luminance of 1835 cd/m² and an efficiency of 0.25 cd/A at 14 V were obtained for the Type II devices. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2093–2104, 2009     

二苯并噻吩和吲哚在NiMoS/γ-Al2O3上加氢脱硫和加氢脱氮反应的相互影响

在固定床高压微反装置上考察了预硫化型NiMoS/γ-Al2O3催化剂上二苯并噻吩（DBT）加氢脱硫（HDS）反应和吲哚加氢脱氮（HDN）反应之间的相互影响。结果表明,吲哚对DBT的加氢脱硫反应具有抑制作用,其中对加氢路径（HYD）比对氢解路径（DDS）的抑制作用强,温度升高后,吲哚的抑制作用减弱。吲哚对DBT加氢脱硫反应的抑制作用源于吲哚及其HDN反应的中间产物在活性位上的竞争吸附。DBT和原位生成的H2S促进了催化剂表面硫阴离子空穴（CUS）向B酸位的转化,从而提高1,2-二氢吲哚（HIN）分子中C(sp3)—N键的断裂能力,使得吲哚的转化率和产物中邻乙基苯胺（OEA）的相对含量增大。HDN活性相的形成虽然需要硫原子的参与,但是活性相的保持并不需要大量的硫原子,较高含量硫化物存在时加氢活性位减少,不利于脱氮反应。     

还原温度对低温还原法制备的Ni_2P/Ti-MCM-41催化剂加氢脱硫性能的影响

以氯化镍(Ni Cl_2·6H_2O)为镍源、次磷酸铵(NH_4H_2PO_2)为磷源、Ti-MCM-41为载体,通过程序升温还原法制备了Ni_2P/Ti-M CM-41催化剂,并采用H_2-TPR、XRD、BET、XPS、TEM等手段对其结构和性质进行了表征。以二苯并噻吩(DBT)为模型化合物,考察了还原温度对Ni_2P/Ti-M CM-41催化剂的加氢脱硫(HDS)性能的影响。结果表明,程序升温还原法制备的Ni_2P/Ti-M CM-41催化剂前驱体的还原温度为318℃,比传统程序升温还原制备的Ni_2P低200℃。在350-500℃下还原得到的催化剂活性相为单一的Ni_2P相,较低的还原温度有利于形成更小粒径的磷化镍晶粒。还原温度为400℃时,制得的Ni_2P/Ti-M CM-41催化剂比表面积高、分散性最好、表面P富集少,具有最高的HDS活性;在340℃、3.0 M Pa、H_2/油体积比500、质量空速(WHSV)为2.0 h~(-1)的条件下,二苯并噻吩HDS转化率达到99.4%。     

Novel Route for Obtaining Isomeric Benzo[b]thiophenoindoles

We describe a novel route for synthesis of benzo[b]thiopheno[2,3-e]- and benzo[b]thiopheno[3,2-f]indoles. As the starting compounds, we used the corresponding annelated isatins obtained by the Sandmeyer reaction. We have established that reduction of the latter to the corresponding unsubstituted benzo[b]thiophenoindoles depends both on the nature of the substituent and on the reaction conditions.     

Oxidative desulfurization of model diesel oil over Ti-containing molecular sieves using hydrogen peroxide

Three Ti-containing molecular sieves were studied in the oxidative desulfurization (ODS) of model diesel oil with hydrogen peroxide. Under optimal conditions, dibenzothiophene (DBT) conversion up to 80.6% and 42.6% could be obtained with Ti-HMS and Ti-MSU as catalysts, respectively. However, there is no activity in the sulfoxidation of DBT over TS-1. Effects of the TiO₂/SiO₂ ratio in Ti-HMS and reaction conditions, such as the reaction temperature, reaction time, n(H₂O₂)/n(S) on the sulfur removal were investigated.     

直链烷烃对Ti-HMS分子筛合成的影响

以十二胺为模板剂,正硅酸乙酯为硅源,钛酸四丁酯为钛源,直链烷烃正己烷或正辛烷为有机添加剂,在室温下合成出具有较大孔径的Ti-HMS分子筛.研究了烷烃对Ti-HMS分子筛的扩孔作用及对分子筛结晶度和催化性能的影响.结果表明,加入的烷烃越多,分子筛的孔径越大;烷烃链长越长,对Ti-HMS的扩孔作用越显著.与不加烷烃的Ti-HMS相比,加入烷烃后,分子筛的结晶度及四配位骨架钛的含量均有所降低,而且加入的烷烃量越多,影响越明显.将加入烷烃所得的Ti-HMS用于模拟燃料中4,6-二甲基二苯并噻吩的氧化脱除反应,结果发现,Ti-HMS的催化氧化活性有所提高,对4,6-二甲基二苯并噻吩的脱除速率增大.     

Elucidation of hydrodesulfurization mechanism on molybdenum‐based catalysts using 35S radioisotope pulse tracer methods

Elucidation of the hydrodesulfurization (HDS) mechanism on molybdenumbased catalysts using radioisotope tracer methods and reaction kinetics is reviewed. Firstly, to investigate the sulfidation state in Mo/Al₂O₃ and Co–Mo/Al₂O₃ catalysts, presulfiding of these catalysts has been performed using a ³⁵S pulse tracer method. Secondly, HDS of radioactive ³⁵Slabeled dibenzothiophene was carried out over a series of sulfided molybdena–alumina catalysts and cobaltpromoted molybdena–alumina catalysts in a pressurized flow reactor to estimate the behavior of sulfur on the working catalysts. Finally, sulfur exchange of a ³⁵Slabeled catalyst with hydrogen sulfide was performed to estimate the relationship between the amount of labile sulfur and catalytically active sites.     

Transition metal complexes with heterocyclic analogs of fluorene. 1. Synthesis, structures, and haptotropic rearrangements of tricarbonylchromium complexes of dibenzothiophene

The complex formation of dibenzothiophene with chromium carbonyl complexes of the general formula L₃Cr(CO)₃ (L = Py, NH₃, or CO) afforded ⁶-C₁₂H₈SCr(CO)₃ (1). In the presence of tetramethylethylenediamine, complex 1 was selectively metallated with BuLi at position 4 of the coordinated ring to form ⁶-4-LiC₁₂H₈SCr(CO)₃ (2). In decane, the tricarbonylchromium group is reversibly and intramolecularly migrates from the unsubstituted to substituted ring due to the inter-ring haptotropic rearrangement (IRHR) at 130 °C for 100 h. In decane, the rate constant of IRHR was estimated experimentally by ¹H NMR spectroscopy and theoretically by the density functional theory (DFT).     

Isomeric Dioxodihydro-1H-Benzo[b]thiophenoindole Synthesis and Properties

The synthesis and properties of new heterocyclic systems are described: isomeric 2,3-dioxo-2,3-dihydro-1H-benzo[b]thiopheno[2,3-g]-, 1,2-dioxo-1,2-dihydro-1H-benzo[b]thiopheno[3,2-e]-, and 2,3-dioxo-2,3-dihydro-1H-benzo[b]thiopheno[2,3-f]indoles. The reduction of the latter to the corresponding unsubstituted benzo[b]thiophenoindoles depends on both the nature of the reducing agent and the reaction conditions.     

镍助剂对碳化钼催化剂的二苯并噻吩加氢脱硫性能的影响

 将MoO3和Ni-Mo混合氧化物在CH4/H2气氛中程序升温还原碳化制备了相应的碳化钼和碳化镍钼催化剂, X射线粉末衍射表征其物相分别为β-Mo2C和Ni-Mo2C. 考察了Ni助剂对碳化钼催化剂的制备及二苯并噻吩加氢脱硫反应性能的影响. 结果表明, Ni助剂的加入降低了碳化钼催化剂所需的还原碳化温度,提高了催化剂的比表面积,并对其二苯并噻吩加氢脱硫反应活性有明显的促进作用. Ni助剂添加量以Ni/Mo原子比为0.3为宜,此时Ni和Mo之间的催化协同效应达到最佳. 当反应压力为3.0 MPa, 反应温度为330 ℃, 空速8 h-1, H2/原料液体积比为500∶1时, 625 ℃还原碳化制备的碳化镍钼催化剂对0.6%二苯并噻吩/环己烷溶液的二苯并噻吩转化率达到96.25%, 较相应的碳化钼催化剂提高了1.57倍.