搅拌釜中制备草酸铈的团聚尺寸模型研究

以硝酸铈和草酸铵反应生成草酸铈沉淀为研究对象，探讨了搅拌釜中输入功率、溶液过饱和度与产物团聚尺寸之间的变化关系并在团聚和破碎动力学的基础上建立了团聚尺寸模型。根据草酸铈沉淀实验中得到的实验结果求得了一定反应体系浓度下的模型K1，K2和K3值，最后通过－↑LtE,max的模型计算值与实验值，ε--↑LtE的模型曲线与实验曲线的比较初步证明了该模型的实际适用性。     

铜基催化剂的结构、物性及其对混合碳四选择加氢反应的催化性能

 用XRD，XPS，SEM和H2－TPR等手段研究了铜基负载型催化剂的结\r\n构和物性及其对混合碳四加氢脱炔的催化性能．结果表明，在负载铜催\r\n化剂中加入一定量的Co可提高催化剂的加氢脱炔活性，而Co含量较少时\r\n加入少量的Ce也能提高催化剂的活性和选择性．Cu和Co之间存在着相互\r\n协同作用，使得活性组分在催化剂表面偏析，CuO在催化剂表面呈非晶\r\n相分散状态，催化剂颗粒粒径变小，催化剂更容易被还原，从而改善了\r\n催化剂的催化性能．     

Complete Oxidation of Methane over Palladium Supported on Alumina Modified with Calcium,Lanthanum,and Cerium Ions

The activity and thermal stability of Pd/Al_2O_3 and Pd/(Al_2O_3 MO_x)(M=Ca,La,Ce) palladium catalysts in the reaction of complete oxidation of methane are presented in this study.The catalyst supports were prepared by sol-gel method and they were dried either conventionally or with supercritical carbon dioxide.Then they were impregnated with palladium nitrate solution.The catalysts with unmodified alumina had a high surface area.The activity and thermal stability of the alumina- supported catalyst was also very high.The introduction of calcium,lanthanum,or cerium oxide into alumina support caused a decrease of the surface area in the way dependent on the support precursor drying method.These modifiers decreased the activity of palladium catalysts,and they required higher temperatures for the complete oxidation of methane than unmodified Pd/Al_2O_3.The improvement of the palladium activity by lanthanum and cerium support modifier was observed only at low temperatures of the reaction.     

Study of thermal decomposition of ammonium cerium sulphate

Thermal decomposition of ammonium cerium sulphate has been studied by differential scanning calorimetry and thermogravimetry. The results show that the material decomposes in five steps in the temperature region 364–1116 K in oxygen. Based on the thermal data, elemental analysis and magnetic susceptibility measurements, sequence of decomposition has been established. The final product has been identified as CeO₂ by X-ray diffractometry. Ammonium cerium sulphate and the products of the first and the final transitions contain cerium ion in 4+ oxidation state, while the three intermediate phases have cerium ion in 3+ oxidation state. From the non-isothermal DSC studies, kinetic parameters have been computed. The isothermal data show that the dehydration process follows Ginstling-Brounshtein mechanism, while the next three steps are governed by Mampel's unimolecular law of random nucleation.

---

Zusammenfassung Mittels DSC und TG wurde die thermische Zersetzung von Ammoniumzersulfat untersucht. Die Ergebnisse zeigen in Sauerstoff einen fünfstufigen Zersetzungsprozeß im Temperaturbereich 364–1116 K. Ausgehend von den thermoanalytischen Angaben, der Elementaranalyse und den Messungen der magnetischen Suszeptibilität wurde eine Sequenz für die Zersetzung erstellt. Das Endprodukt wurde mittels Röntgendiffraktion als CeO₂ identifiziert. Ammoniumzersulfat und die Produkte des ersten und des letzten Überganges enthalten Zerionen mit der Oxydationsstufe +4, während in den drei Zwischenschritten Zerionen mit der Oxydationsstufe +3 vorkommen. Anhand der nichtisothermen DSC-Untersuchungen wurden die kinetischen Parameter berechnet. Die isothermen Angaben zeigen, daß der Dehydratationsprozeß einem Ginstling-Brounstein Mechanismus folgt, während die folgenden drei Schritte durch das Mampelsche unimolekulare Gesetz der Randomkeimbildung bestimmt werden.

     

Nanocrystalline Ce1−xYxO2−x/2 (0≤x≤0.35) Oxides via Carbonate Precipitation: Synthesis and Characterization

A novel carbonate (co)precipitation method, employing nitrates as the starting salts and ammonium carbonate as the precipitant, has been used to synthesize nanocrystalline CeO₂ and Ce_1−xY_xO_2−x/2 (x≤0.35) solid-solutions. The resultant powders are characterized by elemental analysis, differential thermal analysis/thermogravimetry (DTA/TG), X-ray diffractometry (XRD), Brunauer-Emmett-Teller (BET) analysis, and high-resolution scanning electron microscopy (HRSEM). Due to the direct formation of carbonate solid-solutions during precipitation, Ce_1−xY_xO_2−x/2 solid-solution oxides are formed directly during calcination at a very low temperature of ∼300°C for 2 h. The thus-produced oxide nanopowders are essentially non-agglomerated, as revealed by BET in conjunction with XRD analysis. The solubility of YO_1.5 in CeO₂ is determined via XRD to be somewhere in the range from 27 to 35 mol%, from which a Y₂O₃-related type-C phase appears in the final product. Y³⁺-doping promotes the formation of spherical nanoparticles, retards thermal decomposition of the precursors, and suppresses significantly crystallite coarsening of the oxides during calcination. The activation energy for crystallite coarsening increases gradually from 68.7 kJ mol⁻¹ for pure CeO₂ to 138.6 kJ mol⁻¹ for CeO₂ doped with 35 mol% YO_1.5. The dopant effects on crystallite coarsening is elaborated from the view point of solid-state chemistry.     

正己烷在Pt-Ce促进的氧化硅担载的杂多酸金属氧酸盐上的异构化

制备了用于正己烷临氢异构化的氧化硅担载的Keggin型杂多酸和还原态Pt-Ce氧化物催化剂.这些混合氧化物催化剂或单独使用,或与氧化硅担载的杂多酸催化剂一起使用.用X射线衍射、傅里叶变换红外光谱、傅里叶变换拉曼光谱、热重和N2物理吸附等方法表征在氧化、还原态和催化实验后的催化剂状态.本文的目的是在最佳反应条件(反应温度、还原温度和流量等)下,筛选出具有最好异构化收率的催化剂.结果表明,还原氧化物的存在不但有利于消除积炭,而且在反应期间能有效地维持氧化硅担载杂多酸的结构.从这些催化剂样品中,可以找到具有更好异构化活性和选择性的催化剂.     

Hydrolysis of DNA by cerium(IV)/EDTA complex

Homogeneous solutions are formed from equimolar amounts of Ce(NH₄)₂(NO₃)₆ and EDTA. These solutions hydrolyze single-stranded DNA far more efficiently than double-stranded DNA. In contrast, Ce(IV) hydroxide gel, obtained in the absence of EDTA, hydrolyzes both single-stranded and double-stranded DNAs at almost the same rates. In order to achieve this substrate-specificity sufficiently, the mole ratio of EDTA to Ce(NH₄)₂(NO₃)₆ must be 1.0 or greater. By using this remarkable specificity of Ce(IV)/EDTA complex, gap-site in substrate DNA is selectively hydrolyzed. The scission-site is modulated by use of appropriate combination of oligonucleotide additives. The reactions have been kinetically analyzed.     

硫氰酸铈(Ⅲ)与三缩四乙二醇配合物[Ce(C_8H_(18)O_5)(NCS)_3(H_2O)]的合成及晶体结构

合成了硫氰酸铈(Ⅲ)与三缩四乙醇配合物[Ce(C_8H_(18)O_5)(NCS)_3(H_(2)O)].晶体结构分析表明,该配合物晶体属三斜晶系,P(?)空间群.晶胞参数:a=0.8816(3)nm,b=1.0465(2)nm,c=1.2490(2)nm,α=86.46(1)°,β=70.90(2)°,γ=66.37(2)°,ν=0.9943nm~(3),Z=2.D_(计算)=1.769cm~(3),最终偏差因子R=0.049.     

Luminescence Properties of Terbium-, Cerium-, or Europium-Doped α-Sialon Materials

New interesting luminescent α-sialon (M_(m/val+)^val+ Si_12-(m+n) Al_(m+n)OnN_(16−n)) (M=Ca, Y) materials doped with Ce, Tb, or Eu have been prepared and their luminescence properties studied. These show that Tb and Ce are in the 3+ and Eu in the 2+ state. Low-energy 4f↔5d transitions are observed as compared to the luminescence of these ions doped in oxidic host-lattices. This is partially explained by the nitrogen-rich coordination of the rare-earth ion and partially by the narrow size of the lattice site. The latter gives rise to a strong crystal-field splitting of the 5d band and a rather large Stokes shift for Ce³⁺ and Eu²⁺ (6500-7500 and 7000-8000 cm⁻¹, respectively). For (Y,Tb)-α-sialon the Tb³⁺ 4f→5d excitation band (∼260 nm) is in the low-energy host-lattice absorption band (?290 nm), giving rise to a strong absorption for 254-nm excitation, but a low quantum efficiency. The latter is due to photoionization processes or selective excitation of Tb³⁺ at the defect-rich surface, resulting in radiationless transitions. Ce- and Eu-doped Ca-α-sialon show bright long-wavelength luminescence (maxima at 515-540 and 560-580 nm for Ce and Eu, respectively) with a high quantum efficiency and high absorption for 365- and 254-nm excitation. The Eu²⁺ emission intensity and absorption increases for increasing m, which is explained by the Eu²⁺ richer α-sialon composition. The position of the Eu^2α emission does not shift with changing composition of the host-lattice (m, n values), indicating that the local coordination of the Eu²⁺ ion is hardly dependent on the matrix composition.     

Oxidase‐Like Activity of Polymer‐Coated Cerium Oxide Nanoparticles

Inorganic enzyme? Ceria nanoparticles exhibit unique oxidase‐like activity at acidic pH values. These redox catalysts can be used in immunoassays (ELISA) when modified with targeting ligands (see picture; light blue and yellow structures are nanoparticles with attached ligands). This modification allows both for binding and for detection by the catalytic oxidation of sensitive colorimetric dyes (e.g. TMB).