六甲氧基甲基三聚氰胺-多元醇-丙烯酸酯混杂聚合体系的研究

六甲氧基甲基三聚氰胺 (HMMM) 多元醇 丙烯酸酯 酸催化剂混杂聚合体系在高温下同时进行缩聚和自由基聚合并表现出协同效应 .体系中的活泼亚甲基在HMMM的催化下被空气氧化成过氧化氢物 ;过氧化氢物在酸催化下分解成自由基进而引发自由基聚合反应 .研究结果表明 ,体系中存在固化加速的协同效应 ;同时体系中还存在热互补效应 ,丙烯酸酯的自由基聚合反应放出的热可以传递给缩聚反应 ,满足缩聚反应吸热的要求 .混杂聚合得到的高分子合金膜具有优良的机械性能和耐溶剂性能 ,这是由于在混杂聚合过程中形成了互穿聚合物网络 (IPN)结构 .使用潜酸催化剂作为酸的来源 ,可以提高体系的储存稳定性 ;交联 引发剂的使用可以拓宽它的使用范围 ;对超枝化聚合物在混杂体系中的应用也进行了初步研究     

A supported gold catalyst for the elimination of hydrogen from CO2 feed gas in the production of urea

Supported gold catalyst for eliminating hydrogen from CO₂ feed gas in the production of urea is found to be superior to other industrial catalysts (e.g. Pt/Al₂O₃ and PdPt/Al₂O₃) in catalytic activity and resistance to sulfur poisoning.     

耐硫催化剂上合成混合醇的研究

通过改进制备方法和添加助剂，用浸渍－热分解法制得了具有高活性和高选择性的MoS2-K-C型耐硫低碳混合醇催化剂。在8.0-11.0MPa,290-340℃，6000-12000h^-1,H2 S 浓度为100ppm 左右的条件下，在直流反应器中对催化剂进行了性能测试，结果表明，醇得率为0.14-0.47gROH(gcat·h)^-1，选择性为89-98%。同时，考察了操作条件对催化剂性能的影响。1042h的试验，证明催化剂具有很好的稳定性。     

非晶态合金催化剂用于二甲基紫脲酸加氢反应

二甲基紫脲酸加氢反应;nicob/白炭黑催化剂;非晶态合金催化剂     

The gas phase reaction between CO2 and lanthanide atoms. A test of a model for the isokinetic effect

Summary Co₃O₄, NiCo₂O₄ and LaCo₂O₄catalysts were synthesizedby the citric acid-ligated method. These catalysts containing Co-oxide active components can largely lower the temperature of soot combustion under tight contact conditions. Under the conditions of loose contact NiCo₂O₄ cannot promote soot combustion, but LaCo₂O₄ can effectively promote soot combustion because the nanometric perovskite-type catalyst LaCoO₃produced in the LaCo₂O₄sample.</o:p>     

PrCl3催化漆酚干燥成膜的研究

Pr原子特殊的电子层结构使其具有多方面的催化特性．实验发现质量分数为0．7％的PrCl3就可使漆酚(U)于110℃固化成膜的时间从5h降低到1h．用可见分光光度法、电子能谱、紫外和红外光谱等方法研究U在PrCl3作用下的固化成膜历程．结果表明，在Pr(Ⅲ)催化U聚合的过程中首先是U与PrCl3发生配位作用，生成U镨配合物(UPr)，然后该配合物分子中的Pr(Ⅲ)催化U聚合成体形结构的高分子化合物．     

SO42-/Zr-ZSM-5 超强酸催化剂的制备和表征

以硅溶胶和氧氯化锆为硅源和锆源，采用水热合成的方法制得具有ZSM-5结构的Zr-Si分子筛；用0.5mol/L的硫酸处理该分子筛，并在550℃焙烧，制得具有ZSM-5结构的SO4^2-/ZrO2-SiO2分子筛型的固体超强酸。采用XRD、SEM、TG、IR、NH3-PHD和指示剂法对其结构和酸性进行表征。结果表明，该SO4^2-/ZrO2-SiO2具有ZSM-5结构和超强酸性，其酸强度大于-13.75，且具有良好的热稳定性。     

SMSI effect on ceria supported Cu-Pd catalysts in the hydrogenation of 1,3-butadiene

Ceria-supported copper-palladium catalysts have been tested in the hydrogenation of 1,3-butadiene. The SMSI behavior of the bimetallic catalysts depended on the temperature of reduction. They were analyzed by H₂ chemisorption and XPS.     

Review of Directly Producing Light olefins via CO Hydrogenation

Directly making light olefins via CO hydrogenation is a promising process to obtain a nonpetroleum based supply of alkenes.Limited by the ASF distribution function of Fischer-Tropsch synthesis,the yield of light olefins (C2-C4) can not reach the desired levels,which is a great challenge to overcome.Beginning thermodynamic analysis,the ASF distribution function,the reaction performance of CO hydrogenation and slurry reactor studies.The problems currently faced by this research area are presented at the end of the article.     

Strong influences of cocatalyst on ethylene/propylene copolymerization with a MgCl2/SiO2/TiCl4/diester type Ziegler-Natta catalyst

Using triethylaluminum (TEA), triisobutylaluminum (TIBA) or TEA/TIBA mixtures of molar ratio 75/25, 50/50 and 25/75 as the cocatalyst, five different ethylene-propylene copolymer samples were synthesized by a MgCl₂/SiO₂/TiCl₄/diester type Ziegler-Natta catalyst in a slurry polymerization process. The synthesized copolymers are strongly heterogeneous in chain structure and were fractionated into part of nearly random copolymer and part of segmented copolymer. Both polymerization activity and copolymer structure were found to be markedly changed when the cocatalyst was changed from TEA to TEA/TIBA mixtures or pure TIBA. As the content of TEA in cocatalyst increases, yield of the random part of product increases and the yield of the crystalline segmented copolymer part decreases. There is also a decrease in ethylene content of the whole product with increasing TEA amount. Copolymerization behaviors of the TEA/TIBA mixture activated catalysis systems are not simple superposition of those activated by pure TEA and TIBA. When a 50/50 TEA/TIBA mixture was used as cocatalyst, the copolymerization activity became the highest, and yields of both the random copolymer part and the segmented copolymer part are close to the highest level. On the other hand, both parts of the copolymer produced with a 50/50 TEA/TIBA mixture are relatively more blocky than the products of TEA or TIBA systems, and difference in ethylene content between the random part and the segmented part was the smallest. The segmented copolymer part of three typical samples was further fractionated by temperature-gradient extraction fractionation into fractions of different ethylene content and sequence distribution. Changing TEA content in the cocatalyst exerted strong influences also on the fraction distribution of the segmented part of copolymer.