Synthesis,Crystal Structure and Properties of Novel Composite Complex: [La(Nmp)4(H2o)4][HsiMo12O40]·2nmp·H2o

A new composite complex of [La(NMP)₄(H₂O)₄][HSiMo₁₂O₄₀]·2NMP·H₂O (NMP = N-methyl-2- pyrrolidone) was synthesized and characterized by IR, UV, ESR, TG-DTA and single crystal structural analysis. The water and organic ligands (NMP) coordinate directly with La(III) to form a dodecahedral complex and the SiMo₁₂O^4? ₄₀ anion is the counter ion. IR and X-ray analysis show that there is strong interaction between the polyoxometalate and organic donors. The complex is strongly photosensitive under irradiation with sunlight, resulting in a charge-transfer complex by oxidation of the N-methyl-2-pyrrolidone and reduction of the polyoxometalate. Low temperature ESR spectra indicate thermal electron delocalization among the Mo atoms in the title compound.     

Effect of scale and surface chemistry on the mechanical properties of carbon nanotubes‐based composites

In this article, Multi‐Walled Carbon Nanotubes (MWCNTs) of varying diameters, both untreated and polycarboxylated, were dispersed at constant weight percentage in an epoxy matrix, and resulting fracture toughnesses (K_Ic) were measured in each case. We show that changing the MWCNT diameter has two effects on the composite fracture toughness: (i) a small MWCNT diameter enables larger interfacial surface for adhesion maximization, which increases toughness; (ii) at the same time, it limits the available pull‐out energy and reduces the MWCNT ability to homogeneously disperse in the matrix due to this same large active surface: this decreases toughness. Most commercially available MWCNTs have a length range of several μm, thus an optimal diameter exists which depends on MWCNT wall thickness and surface treatment. Such optimal diameter maximizes pull‐out energy and thus composite fracture toughness. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Molecular Chains in the Crystals of a Calcium(II) Complex with Pyridine-3,5-Dicarboxylate (Dinicotinate) and Water Ligands

The crystal of pentaqua (catena-pyridine-3,5-dicarboxylato-O,O) calcium(II) contain zigzag molecular chains composed of Ca ions linked by two bridging oxygen atoms, each donated by one carboxylate group [Ca-O1 2.353(2) Å, Ca-O3^III 2.334(1) Å]. The Ca ions, the ligand molecules and one water oxygen atom coordinated by each metal ion [Ca-O5 2.410(2) Å] are coplanar. The coordination of the Ca ion is completed by four other water oxygen atoms situated above and below the plane of the chain [Ca-O6 2.475(1) Å, Ca-O7 2.371(2) Å]. The coordination number of the calcium(II) ion is seven. The water molecules act as donors in a system of hydrogen bonds.     

Direct Synthesis of a Dimeric Mixed-Anions Bismuth(III) Complex: Synthesis and Structural Characterization of [Bi2(Phen)4(No3)4.4I0.6]I3 (A New Dimeric Compound)

A direct synthetic method of mixing Bi(NO₃)₃ and NaI with 1,10-phenanthroline yielded red crystals of [Bi₂(phen)₄(NO₃)_4.4I_0.6]I₃. In this complex the cationic part is in fact binuclear and contains two [Bi(phen)(NO₃)_1.7I_0.3] groups linked via a bridging NO^? ₃ anion. The I^? ₃ anion was not coordinated to bismuth(III) and the lone pair of valence electrons of the bismuth(III) ions appears to be stereochemically inactive. There are two independent NO^? ₃ anions, one coordinated to bismuth but another shares a position with I^? anion. The final results of crystallography show that 40% of these positions are occupied by NO^? ₃ anions and 60% by I^? anions that are coordinated to bismuth atom in bidentate fashion (NO^? ₃) and in unidentate fashion (I^?). An interesting point is that the I^? ₃ anion was produced by direct synthetic method (Branched tube method). There is a π-π stacking interaction between the parallel aromatic rings around the Bi(III) ion.     

光谱法研究水团簇结构对AlCl3溶液与血清白蛋白作用的影响

研究了冷冻-解冻处理对A1CI₃溶液团簇结构和AICl₃与血清白蛋白相互作用的影响。测定了AICl₃溶液冷冻-解冻处理前后电导率的变化,发现AICI₃溶液经冷冻处理后,电导率有明显增加。采用紫外分光光度法和荧光光谱法对冷冻前后AICI₃溶液与血清白蛋白相互作用的研究表明,A1C1₃溶液经冷冻-解冻处理后,与血清白蛋白的相互作用变弱,配位诱导作用降低,静态猝灭作用变小,这种相互作用变弱的效应是由于水的分子团簇结构变化引起的。     

Synthesis and Structure of Ionic Liquids Containing the ­[Al(OC6H4CN)4]– Anion

The synthesis, structure, and physical properties of ionic liquids (IL) bearing the novel [Al(O–C₆H₄–CN)₄]^– ion as counterion to the commonly used [NR₄]⁺, [PR₄]⁺ and imidazolium ions are reported. Both the influence of the alkyl chain length as well as the functionalization with cyano groups is studied. These ILs are easily obtained by reaction of Ag[Al(O–C₆H₄–CN)₄] with the corresponding ammonium, phosphonium, and imidazolium halides. The stability towards electrophilic cations was investigated. All prepared salts have a window for the liquid phase of ca. 200 °C and are thermally stable up to 450 °C. The solid‐state structures reveal only weak cation ··· anion and anion ··· anion interactions in accord with the observed low melting points (glass transition points).     

聚芳醚酮树脂的分子设计与合成及性能

聚芳醚酮树脂是20世纪发展起来的重要特种工程塑料.因其优良的耐热、耐腐蚀、耐摩擦及生物相容性好等特点,在国防军工、武器装备、航空航天、电子、汽车、机械、石油工业、核能及理疗卫生等高技术领有广泛的应用.此类材料大都采用双酚单体和双氟单体通过A2+B2型亲核缩聚反应制备.这类聚合物的分子结构对材料的性能影响较大,一般情况下分子链由醚、酮、苯三元规整结构构成时,聚合物为半结晶态;然而,当分子结构中存在侧基或其他非规整结构往往破坏聚合物的结晶结构,聚合物呈现无定型态.半结晶聚芳醚酮聚合物具有非常优异的耐热、耐化学稳定性一般作为结构型材料使用;无定型聚芳醚酮具有良好的加工性能,并且可进行一些功能化成为一类优异的功能型材料.本文从结构与性能关系出发,介绍了聚芳醚酮树脂种类,聚芳醚酮树脂的发展历程及合成方法;探讨了聚芳醚酮材料结构与性能关系;总结了功能性聚芳醚酮材料的前沿进展;最后结合实际展望了聚芳醚酮的应用发展方向.     

Ce4+替代Pu4+的模拟固化体(Gd1-xCex)2Zr2O7+x的合成及结构演变

Gd₂Zr₂O₇中Gd具有很大的中子吸收截面, 其烧绿石结构-缺陷萤石结构的转变能较低, 使其成为理想的核废料固化基材. 使用硝酸盐为原料, 添加少量NaF作助熔剂, 在较低温度下(和传统高温固相反应相比), 合成了烧绿石型Gd₂Zr₂O₇. 以Ce⁴⁺模拟Pu⁴⁺, 研究了Gd₂Zr₂O₇对锕系核素的固化, 并合成了系列模拟固化体(Gd_1-xCe_x)₂Zr₂O_7+x (0≤x≤0.6). 采用粉末X射线衍射(XRD)对系列样品进行了表征. 结果表明: 随着x值的增大,样品从烧绿石结构向缺陷萤石结构转变, 且晶胞大小基本保持恒定, 但当x=0.6时, 衍射峰明显宽化, 晶格畸变比较严重, 晶格稳定性降低. 当x=1时, 即用Ce⁴⁺完全取代Gd³⁺进行合成, 不能得到Ce₂Zr₂O₈, 产物发生了相分离, 为四方结构的(Zr_0.88Ce_0.12)O₂和萤石结构的(Ce_0.75Zr_0.25)O₂的混合物. 模拟固化体的浸出率测试表明: 当x≤0.2时, 各元素浸出率均很低, 但当x≥0.4时, 各元素的浸出率明显升高, 说明以Gd₂Zr₂O₇作为固化Pu⁴⁺的基材, Pu⁴⁺掺入量不宜高于40%.     

陈化体系组成对Ce0.65Zr0.35O2储氧材料性能的影响

采用共沉淀法制备了Ce_0.65Zr_0.35O₂(CZ)储氧材料, 在传统的水陈化体系中引入了乙醇, 研究了乙醇的加入对CZ储氧材料性能的影响. 对所制备样品进行了傅里叶变换红外(FTIR)光谱、X射线光电子能谱(XPS)、粉末X射线衍射(XRD)、扫描电镜(SEM)、N₂吸附-脱附、储氧量(OSC)和H₂程序升温还原(H₂-TPR)的表征, 并考察了以CZ储氧材料为载体制备的单钯催化剂的三效性能. 结果表明, 乙醇引入陈化体系对样品的结构和性能有显著影响. 以醇水共存体系陈化制备的CZ储氧材料颗粒小、堆积松散、孔径分布宽、孔容大, 具有优异的储氧性能和热稳定性, 经1000 °C焙烧后, 比表面积为29.3 m²·g^-1, 储氧量仍高达520 μmol·g^-1. 以此为载体制备的单钯催化剂, 空燃比操作窗口宽, 对C₃H₈、CO、NO的转化明显优于水陈化体系制备的储氧材料所制备的催化剂.