In situ synthesis of Ag-SiO2 Janus particles with epoxy functionality for textile applications

A facile method for the synthesis of silver-silica（Ag-SiO₂） Janus particles with functionalities suitable for textile applications is reported.Silica nanoparticles prepared by the Stober method were functionalized with epoxy,amine,and thiol groups,which were confirmed by Fourier transform infrared analysis.The functionalized silica nanoparticles were used to produce Pickering emulsions,and the exposed surface was used for the attachment of silver nanoparticles（AgNPs） via the low-temperature chemical reduction method.The morphology and structure of the Ag-SiO₂ Janus particles were characterized by scanning electron microscopy,scanning transmission electron microscopy,high-resolution transmission electron microscopy,energy-dispersive X-ray analysis,and UV-vis spectroscopy.Because of their specific functionalities,these Ag-SiO₂ Janus particles are proposed for applications on textile substrates,as they can overcome several drawbacks of direct application of AgNPs on textiles,such as leaching,agglomeration,and instability during storage.     

Methane dehydroaromatization with periodic CH4-H2 switch:A promising process for aromatics and hydrogen

Long-term stability test of Mo/HZSM-5-N catalysts(HZSM-5-N stands for nano-sized HZSM-5) in methane dehydroaromatization(MDA)reaction has been performed with periodic CH4-H2 switch at 1033-1073 K for more than 1000 h.During this test,methane conversion ranges from 13% to 16%,and mean yield to aromatics(i.e.benzene and naphthalene) exceeds 10%.N2-physisorption,XRD,NMR and TPO measurements were performed for the used Mo/HZSM-5 catalysts and coke deposition,and the results revealed that the periodic hydrogenation can effectively suppress coke deposition by removing the inert aromatic-type coke,thus ensuring Mo/HZSM-5 partly maintained its activity even in the presence of large amount of coke deposition.The effect of zeolite particle size on the catalytic activity was also explored,and the results showed that the nano-sized zeolite with low diffusion resistance performed better.It is recognized that the size effect was enhanced by reaction time,and it became more remarkable in a long-term MDA reaction even at a low space velocity.     

一种饱和Keggin硅钨酸盐过渡金属衍生物[Cu(biim)_2]_4[α-SiW_(12)O_(40)]_2·4H_2O（英文）

在水热环境下,将Na10[α-SiW9O34]爛18H2O和CuCl2爛2H2O在2,2′-联咪唑和4,4′-联吡啶存在下反应合成一种饱和Keggin硅钨酸盐杂化物[Cu(biim)2]4[α-SiW12O40]2爛4H2O(1),并通过红外光谱,X射线光电子能谱和X射线单晶衍射进行了结构表征.化合物1分子包含2个中性的Keggin[Cu(biim)2]2[α-SiW12O40]单元和4个结晶水分子.值得注意的是在[α-SiW12O40]4-单元中,与硅原子相连的每个氧原子无序排列在两个位置,这导致了硅原子呈现立方体的几何构型.中性Keggin型[Cu(biim)2]2[α-SiW12O40]单元具有中心对称性,两个[Cu(biim)2]2+配离子对称连接在[α-SiW12O40]4-的两端.邻近的[Cu(biim)2]2[α-SiW12O40]单元之间通过氢键作用形成三维的超分子结构.     

一种带疏水长链的水溶性偶氮引发剂的合成及端基疏水聚合物疏水缔合效应研究

以偶氮二异丁腈、十二胺为主要原料,通过Pinner反应制备了一种两端各带有12个碳烷基链的水溶性偶氮引发剂——2,2'-偶氮二异丁基十二脒盐酸盐AIBL.采用核磁氢谱、元素分析及液相色谱对AIBL进行了结构及纯度表征,采用TGA、DSC和紫外分光光度计研究了其热分解现象和热分解动力学,采用表面张力仪对其表面活性进行了测定.结果表明,所合成的引发剂AIBL具有预想的结构和较高的纯度,其热分解反应属于一级反应,热分解活化能为134.80 k J/mol,70℃下水中的半衰期约为4 h;AIBL在水溶液中具有表面活性,其临界胶束浓度为0.13 g/L,对应的表面张力为33.57 m N/m.以丙烯酰胺为单体、AIBL为引发剂制备了水溶性端基疏水聚合物SPAM.采用溴化法研究其转化率,应用乌氏黏度法、零切黏度法以及荧光探针对其缔合作用进行了研究.结果表明,AIBL具有良好的引发丙烯酰胺聚合的能力;相对于不带疏水长链的引发剂所合成的聚合物PAM,SPAM具有明显的疏水缔合效应,这说明AIBL成功地将疏水长链引入到聚合物的端基中,从而形成端基疏水聚合物.     

不同有机碱对铕-2-羟基喹啉-4-羧酸配合物发光性能的影响

分别在有机碱三乙胺、三丙胺和三丁胺的作用下,使用2-羟基喹啉-4-羧酸(H2hqc)与EuCl3·6H2O反应制备了3种配合物Eu(Hhqc)3(TEL)、Eu(Hhqc)3(TPL)和Eu(Hhqc)3(TBL)。通过元素分析、热重分析、摩尔电导率、紫外光谱、荧光光谱、荧光寿命和量子产率等对配合物进行了表征。所有配合物均在580,592,613,654,702 nm附近产生5条谱带,为Eu3+的特征发射,归属为5D0→7FJ(J=0,1,2,3,4)能级间的跃迁,荧光寿命分别为2.22,3.29,3.31 ms,量子产率分别为0.011,0.019,0.028。随着有机胺碳链长度的增加,配合物的荧光强度依次增大,表明有机碱参与了配合物的分子组成。     

Advances in high carbon dioxide separation performance of poly(ethylene oxide)-based membranes

Poly(ethylene-oxide)(PEO)-based membranes have attracted much attention recently for CO2 separation because CO2 is highly soluble into PEO and shows high selectivity over other gases such as CH4 and N2.Unfortunately,those membranes are not strong enough mechanically and highly crystalline,which hinders their broader applications for separation membranes.In this review discussions are made,as much in detail as possible,on the strategies to improve gas separation performance of PEO-based membranes.Some of techniques such as synthesis of graft copolymers that contain PEO,cross-linking of polymers and blending with long chains polymers contributed significantly to improvement of membrane.Incorporation of ionic liquids/nanoparticles has also been found effective.However,surface modification of nanoparticles has been done chemically or physically to enhance their compatibility with polymer matrix.As a result of all such efforts,an excellent performance,i.e.,CO2 permeability up to 200 Barrer,CO2/N2 selectivity up to 200 and CO2/CH4 selectivity up to 70,could be achieved.Another method is to introduce functional groups into PEO-based polymers which boosted CO2 permeability up to 200 Barrer with CO2/CH4 selectivity between 40 and 50.The CO2 permeability of PEO-based membranes increases,without much change in selectivity,when the length of ethylene oxide is increased.     

粗糙床面物质交换特性及其主导机制实验研究

粗糙底床泥-水界面区域的物质交换过程不仅与水动力作用有关,还涉及到底床物理特性和床面形态的影响.为研究粗糙底床渗透率和床面微地形对泥-水界面物质交换过程的综合影响,通过实验室环形水槽实验,测量得到不同砂质平整底床和存在离散粗糙元床面条件下,泥-水界面物质交换通量和有效扩散系数的定量数据和变化特征,并采用参数化方法分析无量纲控制参数变化范围内界面物质交换特性的主导机制.实验结果表明,粗糙底床渗透率和床面微地形共同对泥-水界面物质交换过程起重要作用.与平整底床相比,离散粗糙元局部绕流结构驱动的附加泵吸交换不同程度增大了界面物质交换通量,其增强效应与底床渗透率和床面粗糙度的变化密切相关.随底床渗透率和床面粗糙度的增大,有效扩散系数总体呈增大趋势,湍流渗透对界面物质交换的影响趋于增强,而泵吸交换的相对贡献趋于减弱.因此,分析存在床面微地形粗糙底床的主导界面物质交换机制,需要考虑底床渗透率和床面粗糙度的综合影响.     

高压烧结制备Tb掺杂n型(Bi1–xTbx)2(Te0.9Se0.1)3合金及其微结构和热电性能

采用高压烧结技术制备了稀土元素Tb掺杂的n型Bi2Te2.7Se0.3基纳米晶块体热电材料.将高压烧结成型的样品于633 K真空退火36 h.研究了Tb掺杂量对样品的晶体结构和热电性能的影响.结果表明,高压烧结制备的样品为纳米结构, Tb掺杂使样品的晶胞体积变大,功率因子增大,热导率降低,从而使ZT值提高.Tb掺杂量为x=0.004是最优的掺杂量,该掺杂量的高压烧结样品经退火处理后,于373 K时ZT值达到最大为0.99,并且在323-473 K范围内, ZT值均大于0.8,这对用于温差发电领域具有重要意义.     

钴掺杂MoSe2共生长中氢气的作用分析及磁电特性研究

采用原位共生长化学气相沉积法,以Co3O4、MoO3、Se粉末为前驱物,710℃下在SiO2衬底上生长掺钴MoSe2纳米薄片,分析讨论氢气含量对其生长及调节机理的影响.表面形貌分析表明,氢气的引入促进了成核所需的氧硒金属化合物以及横向生长中需要的CoMoSe化合物分子的生成;AFM(Atomic Force Microscope)结果表明氢气有利于生长单层二维超薄掺钴MoSe2.随着Co3O4前驱物用量的增加,样品的拉曼和PL(Photoluminescence)谱图分别表现出红移和蓝移现象,带隙实现从1.52—1.57 eV的调制.XPS(X-ray photoelectron spectroscopy)结果分析得到Co的元素组分比为4.4%.通过SQUID-VSM(Superconducting QUantum Interference Device)和器件电学测试分析了样品的磁电特性,结果表明Co掺入后MoSe2由抗磁性变为软磁性;背栅FETs器件的阈值电压比纯MoSe2向正向偏移5 V且关态电流更低;为超薄二维材料磁电特性研究及应用拓展提供了基础探索.