假丝酵母和白地霉的原生质体融合研究

对影响假丝酵母和白地霉原生质体制备与再生的因素:菌龄、破壁酶的种类和浓度、酶解时间、脱壁促进剂、渗透压稳定剂进行了研究。在综合比较原生质体制备率和再生率基础上,确定了制备原生质体的优化条件为:选用对数生长中期的菌体,用0.05%EDTA进行预处理,以0.7 mol/L NaCl为渗     

Interaction behaviours of solitoffs: fission, fusion, reconnection and annihilation

The interactions between solitoffs are extensively investigated. Besides the known solitoff fission and fusion interactions, two new types of solitoff interactions are discovered, named the solitoff reconnection and the solitoff annihilation. Taking the asymmetric Nizhnik--Novikov--Veselov equation as an illustrative system, five types of solitoff interactions are graphically revealed on the basis of the analytical solution obtained by the modified tanh function expansion method.     

不同部位矿质元素与红外光谱数据融合对美味牛肝菌产地溯源研究

野生食用菌产地溯源研究中,采用单一有机成分或矿质元素指纹存在一定局限性。利用不同指纹分析技术的互补性与协同性,将不同部位与类型的化学信息进行融合,探讨此方法对野生食用菌产地溯源的可行性,以期为野生食用菌溯源提供新的思路与科学依据。通过测定云南7个产地、124个美味牛肝菌(菌柄、菌盖)中15种矿质元素的含量,以及子实体傅里叶变换红外光谱(FTIR)。标准正态变换(SNV)、二阶导数(2D)等算法对原始光谱进行预处理。基于低级与中级数据融合策略,将预处理后的FTIR光谱与菌柄、菌盖矿质元素数据进行融合,结合支持向量机(SVM)分别建立菌柄、菌盖、FTIR、低级数据融合(菌柄+菌盖,菌柄+菌盖+FTIR)与中级数据融合(菌柄+菌盖+FTIR)判别模型;分析比较模型参数,确定快速甄别美味牛肝菌产地的可靠方法。结果显示：(1)菌盖中Cd,Cr,Cu,Li,Mg,Na,P和Zn元素平均含量高于菌柄,Ba,Ca,Co,Ni,Rb,Sr和V元素在菌柄中平均含量高于菌盖。美味牛肝菌中人体必需矿质元素Ca,Cu,Mg,P和Zn平均含量远高于小麦、水稻干品和新鲜蔬菜,与动物干制品含量相似;(2)FTIR光谱数据最佳预处理方法为3D+SNV,其Q2和R2Y分别为76.64%,88.91%;(3)菌柄、菌盖、FTIR、低级数据融合与中级数据融合SVM模型,c值分别为8 192,4 096,1.414 2,11.313 7,1和0.7071 1,菌柄和菌盖模型c值较大,表明采用单一菌柄或菌盖矿质元素含量数据,SVM训练存在过拟合风险,判别效果较差;(4)FTIR、低级数据融合和中级数据融合SVM模型,样品分类错误总数分别为7,9,7和0,中级数据融合(菌柄+菌盖+FTIR)模型样品分类正确率最高。表明基于中级融合策略将不同部位矿物元素和子实体FTIR光谱数据融合,可作为野生食用菌产地溯源的一种有效方法。     

一种用于钣金零件视觉测量的图像拼接方法

在钣金零件视觉测量中,大尺寸零件超出图像采集摄像机的视场范围,不能一次性获得该零件的完整图像,需要将存在一定重叠区域的图像进行图像拼接。针对特征稀少、灰度信息少、轮廓对称的钣金零件图像不易拼接问题进行了分析和研究,提出了一种在待拼接图像中选择包含重叠部分的等大小区域作为待配准区域,并对其提取轮廓,然后对轮廓图利用相位相关法求待配准区域的配准参数,再根据待配准区域图像与待拼接图像的坐标关系转换求待拼接图像的配准参数并对图像进行配准,实现钣金零件图像拼接的方法。通过实验表明,该拼接方法对特征稀少、灰度信息少和轮廓对称的钣金零件图像具有速度快、较好的准确性和抗干扰能力,能够满足工业应用的要求。     

Nondestructive testing of external defects on Nanguo pear

In view of the common pests and diseases and irregularly shaped fruits of Nanguo pear, this paper fused the spectral information and image features to realize the rapid nondestructive testing and recognition of the external defects on Nanguo pear by hyperspectral imaging technology. Backpropagation neural network and support vector machine model was established to identify external defects, which are commonly used in classification and pattern recognition. The testing results show that recognition effect of support vector machine is better than backpropagation neural network. Among them, the recognition accuracy of fruits damaged by insects and rotten fruits of Nanguo pears reaches 100%. This study provides a theoretical basis for developing online grading system and quality detection of Nanguo pear based on multispectral imaging technique.     

Ultrafast X‐ray imaging of laser–metal additive manufacturing processes

The high‐speed synchrotron X‐ray imaging technique was synchronized with a custom‐built laser‐melting setup to capture the dynamics of laser powder‐bed fusion processes in situ. Various significant phenomena, including vapor‐depression and melt‐pool dynamics and powder‐spatter ejection, were captured with high spatial and temporal resolution. Imaging frame rates of up to 10 MHz were used to capture the rapid changes in these highly dynamic phenomena. At the same time, relatively slow frame rates were employed to capture large‐scale changes during the process. This experimental platform will be vital in the further understanding of laser additive manufacturing processes and will be particularly helpful in guiding efforts to reduce or eliminate microstructural defects in additively manufactured parts.     

Melting temperature and enthalpy variations of phase change materials (PCMs): a differential scanning calorimetry (DSC) analysis

Differential scanning calorimetry (DSC) analysis is a standard thermal analysis technique used to determine the phase transition temperature, enthalpy, heat of fusion, specific heat and activation energy of phase change materials (PCMs). To determine the appropriate heating rate and sample mass, various DSC measurements were carried out using two kinds of PCMs, namely N-octadecane paraffin and calcium chloride hexahydrate. The variations in phase transition temperature, enthalpy, heat of fusion, specific heat and activation energy were observed within applicable heating rates and sample masses. It was found that the phase transition temperature range increased with increasing heating rate and sample mass; while the heat of fusion varied without any established pattern. The specific heat decreased with the increase of heating rate and sample mass. For accuracy purpose, it is recommended that for PCMs with high thermal conductivity (e.g. hydrated salt) the focus will be on heating rate rather than sample mass.     

第一壁材料用纳米结构氧化物弥散强化钢制备工艺及其性能研究进展

近年来发展起来的纳米结构氧化物弥散强化钢(ODS钢),因其有优异的耐高温、抗辐照及力学性能,满足聚变堆第一壁结构材料的要求。本文主要简述了纳米结构ODS钢制备工艺及其性能的研究进展。     

双波段光谱融合的猪肉多品质参数同时检测方法研究

在双波段可见/近红外光谱系统(350~1 100和1 000~2 500 nm)中,由于两台仪器性能有所不同,导致在波段重叠区域对同一样品测得的反射率不同,出现数据交叉现象。针对此问题,提出一种波段连接数据融合的方法,以期对两个波段的光谱进行更好的应用。首先采集60个生鲜猪肉样品表面的反射光谱信息,利用Savitzky-Golay(S-G)平滑和标准正态变量变换进行预处理,然后利用单一波段和双波段光谱数据与猪肉品质参数(颜色参数L*, a*, b*,pH和蒸煮损失率)理化值建立偏最小二乘预测模型,并分析比较。利用提出的波段融合方法对两个波段重叠区域出现的交叉进行处理,处理后的双波段光谱融合数据对参数L*, a*, b*, pH以及蒸煮损失率建模,验证集的相关系数分别为0.948 8,0.920 0,0.950 5,0.930 1和0.903 5,模型效果与未融合前相当甚至更优。采用无信息变量消除法方法进行特征变量筛选,利用优选后的特征变量建立了更为简化的模型。实验结果表明,所提出的波段融合方法能够对两个波段光谱数据实现较好的融合,利用融合后的光谱数据有利于建立更简化、性能更佳的预测模型。