Room temperature liquid crystal of symmetric gallic trimer containing cyanuric core: synthesis and mesomorphism

Three novel gallic monomer 7, dimer 10 and trimer 12 with conjugated cyanuric core were designed and synthesised by Schiff-base condensation mode in yields of 80–90%. Their structures were characterised by fourier transform infrared spectroscopy, ¹H NMR (nuclear magnetic resonance), electrospray ionization mass spectrometry and elemental analyses. Their mesomorphic behaviours were investigated by differential scanning calorimetry, polarising optical microscopy and X-ray diffraction. The gallic monomer 7 has no mesomorphic property, but the dimer 10 and trimer 12 possess good mesomorphic properties. The trimer 12 with high symmetry exhibited the typical hexagonal columnar liquid crystal at room temperature. The temperature range of mesophase is as wide as 149°C (14–163°C). The results suggested that the more gallic units and symmetric structures are favourable for excellent mesomorphic properties.     

Nano MgFe2O4 synthesized by sol–gel auto-combustion method as anode materials for lithium ion batteries

In this work, spinel structure MgFe₂O₄ nano-crystals were synthesized by sol–gel auto-combustion method. Morphology and structure of the synthesized MgFe₂O₄ material is characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). And its electrochemical properties were investigated at different active material ratio. Galvanostatic charge/discharge and cyclic voltammograms (CVs) measurements show that the electrode with a ratio of 40:40:20, which is the ratio of active material: super-P carbon (SP): polyvinylidene fluoride (PVDF), presents relatively superior performance with the initial discharge capacity of 1,123 mAh g^?1 and charge/discharge efficiency of 96.7 %. And after 50 cycles, it still maintains at 635 mAh g^?1, which is nearly double that of the other two electrodes with active material ratio of 60:25:15 and 80:15:5. Electrochemical impedance spectra testing shows that the charge transfer resistance (Rct) decreases along with the increasing amount of SP, which is benefit for reducing the polarization and improving the cycling stability of the electrode to a certain extent.     

高温处理工艺对低压MOCVD外延GaAs/Ge太阳电池的影响

采用自制的低压金属有机化学汽相淀积LP-MOCVD设备,在Ge衬底(100)面向(111)偏9°外延生长出GaAs电池结构,对电池材料进行了X射线衍射分析另外,对由此材料制成的太阳电池进行了性能测试,测试结果表明,Ge衬底的高温处理工艺对GaAs/Ge太阳电池的电流电压特性有一定的影响试验表明,在600～700℃之间高温处理效果较好。     

脒基配体/PdCl2催化Suzuki偶联反应研究

合成和表征了一系列具有不同位阻和电子效应取代基的脒基配体.研究表明,脒基配体在有氧条件下,与氯化钯原位作用能有效地催化不同溴代反应物与苯硼酸的Suzuki偶联反应.考察了配体结构、反应温度和溶剂对反应的影响,结果表明,脒基配体上具有大体积和推电子取代基有利于偶联反应的进行;提高反应温度和引入质子性极性溶剂也是提高偶联反...     

Boundary layers associated with the 3-D Boussinesq system for Rayleigh–Bénard convection

We investigate the boundary layer effects of the 3-D incompressible Boussinesq system for Rayleigh–Bénard convection with vanishing diffusivity limit. By adopting the multi-scale analysis and the asymptotic expansion methods of singular perturbation theory, we construct an exact approximating solution for the viscous and diffusive Boussinesq system with well-prepared initial data. In addition, we obtain the convergence result of the vanishing diffusivity limit.     

Anthraquinone Covalently Modified Carbon Nanotubes for Efficient and Steady Electrocatalytic H2O2 Generation

Anthraquinone(AQ) modified carbon materials could be endowed with significantly improved oxygen reduction reaction(ORR) activity. However, the application of these materials in the generation of hydrogen peroxide (H₂O₂) has been rarely investigated. For this motivation, AQ covalently modified carbon nanotube(AQ-CNT) was purposely synthesized for H₂O₂ generation. It was found that the cumulative H₂O₂ concentration reached up to 187.18 mg/(L·h) over AQ(40)-CNT catalyst, nearly 2.0 times higher than that over CNT, and being superior to those over most carbon materials reported. The enhanced activity stemmed from the improved mass transfer efficiency of oxygen and the enhanced electrocatalytic activity. Noteworthily, the AQ(40)-CNT material exhibited satisfactory stability for H₂O₂ generation, which was ascribed to the strong interaction force of C-N covalent bond. The present work could provide a vital idea for designing electrode material with simultaneously improved activity and stability for H₂O₂ generation.     

Synthesis and Dyes Adsorption Properties of Calix[4]crown-grafted Chitosan Chelating Polymer

By the Schiff-base condensation of formacyl calix[4]crown(2) with raw chitosan, a novel calix[4]crown- grafted chitosan chelating polymer(3) was conveniently prepared in good yield. The structure of polymer 3 was confirmed by elemental analysis, infrared(IR) spectrometry and X-ray diffraction(XRD) analysis. The elemental analysis suggests that the grafting degree of calixcrown unit was 22% on the amino groups of chitosan. The morphological characteristic of polymer 3 was studied by scanning electron microscopy(SEM). Polymer 3 possessed loose porous and smooth morphology of surface. The dyes adsorption abilities of polymer 3 for a series of organic dyes[Orange I(OI), Neutral red(NR), Victoria blue B(VB) and Brilliant green(BG)] were studied by solid-liquid adsorption experiments. The adsorption percentages increased from 45%―60%(raw chitosan for dyes) to 75%―90%(polymer 3 for dyes). The highest adsorption percentage reached 89% for VB. The saturated adsorption capacities for OI, NR, VB and BG were as high as 622, 564, 854 and 781 mg/g, respectively. The adsorption abilities kept stable at 70%―90% in the scope of pH=5―9. The adsorption abilities for anionic dye(OI) decreased gradually with the increase of pH and the opposite trend was observed for cationic dyes(NR, BG, VB). The adsorption percentages were 70%―90% after five times' cycles for adsorption.     

多体系统传递矩阵法研究进展

作为一种多体系统动力学新方法, 多体系统传递矩阵法由于其无需系统总体动力学方程和快速计算的特点, 已被广泛用于各种多管火箭、自行火炮、舰炮等复杂大型机械系统动力学分析与设计. 本文介绍了该方法的研究进展, 包括: 线性多体系统传递矩阵法、多体系统离散时间传递矩阵法、二维系统传递矩阵法、受控多体系统传递矩阵法、多体系统传递矩阵法和通常动力学方法的混合方法等, 给出了该方法解决自行火炮、多管火箭武器多体系统动力学的重大工程应用实例.      

铀酰杂化超分子化合物的合成、结构、电化学、荧光及光催化性质

合成了2,9-二甲基-1,10-邻菲罗啉的铀(Ⅵ)超分子杂化配合物[UO2Cl4]2[dmphenH2]2·3H2O(1),并进行了IR、UV、XPS和X单晶衍射分析。 铀的杂化配合物呈六配位的变形八面体结构,属单斜晶系,Cc空间群;晶胞参数分别为：a=1.7043(2) nm,b=0.8809(13) nm,c=2.7492(10) nm,α=90°,β=94.493(2)°,γ=90°,Z=4,V=4.1149(8) nm3。 氢键和π…π相互作用大大加强了配合物的稳定性。 配位导致紫外光谱的最大吸收峰发生红移。 荧光光谱显示,配合物在407 nm的光激发下可发射506.6 nm绿色荧光。 电化学研究表明,该配合物具有一对可逆的氧化还原峰和一个不可逆的还原峰。 该配合物在紫外光照射下显示出极高的光催化活性。 CCDC：780721