膨胀石墨负载钯纳米颗粒催化六价铬还原反应

采用高分子辅助的浸渍还原法,制备得到膨胀石墨(EG)负载的纳米钯催化剂(Pd-EG),采用X射线衍射(XRD)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)等手段对催化剂组成、结构、形貌和价态进行了表征,并考察了Pd-EG催化剂在六价铬还原反应中的活性.结果表明,催化剂中纳米钯颗粒均匀分散在膨胀石墨上,平均粒径为4.37 nm,金属负载量质量分数为0.446%.该催化剂对六价铬还原反应具有良好的催化性能,可将六价铬完全转化为三价铬,在pH=4.0及45℃条件下反应转化频率(TOF)达到3186 h-1;催化剂经过多次重复使用后的活性仍保持稳定.     

Palladium supported on urea-containing porous organic polymers as heterogeneous catalysts for C–C cross coupling reactions and reduction of nitroarenes

The novel palladium nanoparticles (Pd@POPs) were successfully prepared with controllable sizes and dispersity through the introduction of H₂PdCl₄ into urea-linked porous organic polymers (POPs) in an aqueous environment followed by reducing Pd(II) to Pd(0) by NaBH₄. The newly prepared Pd@POPs were thoroughly characterized by FT-IR, ICP-AES, BET, XRD, SEM and TEM. Furthermore, the catalytic reactivities of this novel Pd@POPs were investigated via Heck, Suzuki-Miyaura cross-coupling reaction and nitroarene reduction, and they exhibited superior catalytic performances in all these three reactions, producing the corresponding products in up to quantitative yields. Additionally, the Pd@POPs had excellent recyclability in both Heck and Suzuki-Miyaura cross-coupling reactions with the repeating time up to four times and ten times, respectively, along with no obvious decrease of catalytic reactivities.     

利用多项式拟合测量飞机油箱油量

飞机飞行中,测量剩余油量是关乎飞行安全的重要工作。以往采用的查表法存在存储数据量过大的问题,而插值法的计算又过于复杂,为此,提出了一种基于多项式数据拟合的油箱剩余油量测量方法,该方法通过存储多项式系数减少数据存储量,通过将多元插值计算改为多项式计算降低运算量。实验中,首先通过地面实验数据拟合获取多项式参数,再利用飞机飞行中获取的测量数据进行计算,所得结果与油箱内剩余油量的实际测量结果相比较,测量误差满足使用要求。通过理论和实验分析,在多项式拟合的阶数选择上明确了使用三阶多项式的合理性。该方法有较好的实用性,已在实践中应用。     

Effective scrap iron particles (SIP) pre-treatment for complete mineralization of benzidine based azo dye effluent

This study proposed that hybrid scrap cast iron particles (SIP)-aerobic biodegradation technology could enhance the biodegradability of toxic wastewater. SIP cleaved the azo linkages of Direct Green1 dye to form benzidine, 4-aminophenol, aniline and 1,2,7-triamino-8-hydroxynapthalene-3,6-disulfonic acid. SIP-mediated dye reduction was effective at wide pH range; however, kinetic analysis revealed fastest pseudo-first order dye reduction rate at acidic pH 3 (k_d = 0.549 min⁻¹) followed by pH 9 (k_d = 0.383 min⁻¹) and pH 7 (k_d = 0.318 min⁻¹). The daughter aromatic amines produced were partially adsorbed onto the SIP surface and maximally at neutral pH. The adsorption process followed pseudo-second order adsorption kinetics and Langmuir isotherm. Benzidine was adsorbed more than 4-aminophenol and aniline. BOD₅ of the SIP-treated effluent increased from 0.93 to 12 mg/L showing improved biodegradability. The daughter amines were rapidly mineralized in the aerobic bioreactor within 6 h. Cost-effective SIP pre-treatment could accelerate mineralization and detoxification of recalcitrant wastewater.     

基于公式真度的公式集约简

基于经典命题逻辑的真度理论,讨论了经典命题逻辑系统当中公式集的约简问题。提出了真度约简及α-真度约简的概念,为公式集的约简提供了一种可行的操作方法。     

Simple and one-pot synthesis of tri and tetracyclic frameworks containing [1,8]naphthyridin-2-one moiety from the Baylis-Hillman adducts

A facile synthesis of tri and tetracyclic frameworks containing [1,8]naphthyridin-2-one skeleton from the Baylis-Hillman alcohols via the Johnson-Claisen rearrangement, followed by the treatment with Fe/AcOH in simple one-pot multi-step process is described.     

InBr3-catalyzed reduction of ketones with a hydrosilane: deoxygenation of aromatic ketones and selective synthesis of secondary alcohols and symmetrical ethers from aliphatic ketones

An InBr₃-Et₃SiH reducing system was developed to selectively convert aliphatic ketones to a variety of secondary alcohols in moderate to good yields. An initial mixing of InBr₃ and PhSiH₃ was followed by the addition of aliphatic ketones and a solvent to afford the symmetrical ether derivatives.     

An expedient reductive method for conversion of ketoximes to the corresponding carbonyl compounds

A wide array of readily prepared pivalates of ketoximes can be converted to the corresponding ketones in good yields by treatment with iron powder in THF containing catalytic amounts of both trimethylsilyl chloride and glacial acetic acid at room temperature for 30 min, followed by a brief aqueous workup.     

1,3-Bis(2,4,6-trimethylphenyl)imidazolium chloride in combination with triethylamine: an improved catalytic system for hydroacylation/reduction of activated ketones

A rapid, economic, and high yielding methodology has been developed for hydroacylation/reduction of activated ketones by using 1,3-bis(2,4,6-trimethylphenyl)imidazolium chloride as a catalyst in combination with triethylamine. The reaction proceeded at an ambient temperature via generating N-heterocyclic carbene in situ that interacted with the (hetero)aryl aldehyde employed. While the reduction of ketones takes place in MeOH, the hydroacylation process was found to be effective in THF for both electron rich and deficient aldehydes.