Cellulose hydrolysis – the role of monocomponent cellulases in crystalline cellulose degradation

Changes in the molecular structure of cellulose during hydrolysis with four recombinant -1,4-glycanases from the cellulolytic bacterium Cellulomonas fimi were assessed and compared in an attempt to elucidate the mechanism of crystalline cellulose degradation. It was apparent that the two endoglucanases, Cel6A and Cel5A, degraded sigmacell cellulose differently; Cel5A liberated more soluble sugars (cellobiose and cellotriose) and significantly altered the molecular weight distribution, while Cel6A had a limited effect on the polymer size and liberated primarily cellobiose and glucose. Additionally, both endoglucanases slightly increased the crystallinity of cellulose. In contrast, the cellobiohydrolases, Cel6B and Cel48A, had no effect on cellulose molecular weight and liberated only cellobiose and cellotriose. However, Cel48A was shown to be effective at reducing the crystallinity of the cellulosic substrate, while Cel6B increased the crystallinity index. Synergistic hydrolysis using combinations of the different enzymes showed that, although the cellulose was extensively hydrolysed, the molecular structure of the substrate was similar to the original material. This phenomenon suggests that the actions of individual monocomponent enzymes are offset by the concurrent modification by the complementing enzymes during synergistic hydrolysis.     

Application of diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) for the identification of potential diagenesis and crystallinity changes in teeth

During burial, diagenetic alteration can invalidate the paleodietary signature, which the hydroxyapatite (Ca₅(PO₄)₃OH) matrix in incremental tissues, such as tooth enamel, provides. Thus, analytical methods that can evaluate diagenetic changes are crucial in anthropological and archaeological investigations. Modern deciduous tooth enamel (exfoliated) from Solis, Mexico and Kalama, Egypt, as well as Bronze Age (circa 2200 B.C.E.) adult enamel from (present-day) Tell Abraq, U.A.E. and adult enamel from the New York African Burial Ground (NYABG) in lower Manhattan, were analyzed using diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The samples were compared to synthetic hydroxyapatite powder and bone ash samples. The DRIFTS spectra of tooth enamel yielded similar infra red finger print pattern to previous pellet-based FTIR spectra in both absorbance and Kubelka–Munk units. The study demonstrates that DRIFTS is a convenient alternative to pellet-based transmission FTIR in testing diagenetic changes in hard tissue for archaeological investigations. Tooth enamel samples contained a higher carbonate–phosphate ratio than synthetic hydroxyapatite and bone ash standard samples. Correlations are reported between Crystallinity Index (CI_Ab) and carbonate–phosphate ratio, strontium–calcium ratio, and fluoride peak appearance. Crystallinity indexes (CI_Ab) were in the range of 2.6–3.8 (in absorbance units) and Kubelka–Munk Crystallinity indexes (CI_KM) were in the range of 3.1–4.9.     

PMMA—PEO接枝共聚物及其导电金属盐络合物结晶性能的WXAD研究

本文采用广角 X射线衍射(WAXD)法,对以聚甲基丙烯酸甲酯(PMMA)为主链,以聚环氧乙烷(PEO)为支链的接枝共聚物(PMMA—PEO)及其导电金属盐络合物的结晶性能进行了研究,并讨论了结晶度和晶粒尺寸对导电络合物导电性能的影响。实验结果表明:1)PMMA-PEO接枝共聚物的结晶度随着PEO含量的增加而增加,随着金属盐浓度的增加而减小,且不同金属盐降低结晶度的大小顺序为LiClO_4>KSCN>FeCl_2;2) 支链PEO的晶粒尺寸受PEO含量的影响较小,但受金属的种类和浓度的影响很大;3)金属盐络合物的导电率受结晶度影响,不同金属盐形成的络合物的导电率大小顺序为PMM-PEO-KSCN>PMMA-PEO-LiClO_4>PMMA-PEO-FeCl_2。     

Cellulose crystallinity and ordering of hemicelluloses in pine and birch pulps as revealed by solid-state NMR spectroscopic methods

Solid-state ¹³C NMR spectroscopy was used to determine the degree of cellulose crystallinity (CrI) in kraft, flow-through kraft and polysulphide–anthraquinone (PS–AQ) pulps of pine and birch containing various amounts of hemicelluloses. The applicability of acid hydrolysis and the purely spectroscopic proton spin-relaxation based spectral edition (PSRE) method to remove the interfering hemicellulose signals prior to the determination of CrI were also compared. For softwood pulps, the spectroscopic removal of hemicelluloses by PSRE was found to be more efficient than the removal of hemicelluloses by acid hydrolysis. In addition to that, the PSRE method also provides information on the associations between cellulose and hemicelluloses. On the basis of the incomplete removal of xylan from the cellulose subspectra by PSRE, the deposition of xylan on cellulose fibrils and therefore an ordered ultrastructure of xylan in birch pulps was suggested. The ordered structure of xylan in birch pulps was also supported by the observed change of xylan conformation after regeneration. Similarly, glucomannan in pine pulps may have an ordered structure. According to the ¹³C CPMAS measurements conducted after acid hydrolysis, the degree of cellulose crystallinity was found to be slightly lower in birch pulps than in the pine pulps. Any significant differences in cellulose crystallinity were not found between the pulps obtained by the various pulping methods. Only in pine PS–AQ pulp, the degree of cellulose crystallinity may be slightly lower than in the kraft pulps containing less hemicelluloses.     

The hydrolysis and recrystallisation of lyocell and comparative cellulosic fibres in solutions of mineral acid

Regenerated cellulosic fibres undergo a process described as scission-reordering during hydrolysis in solutions of mineral acid. This occurs within disordered polymer regions at lateral crystal interfaces, which are accessible to aqueous agents through the pore spaces and polymer free volume. This process is distinct from that of oligomer-solubilsation, which occurs within disordered polymer regions in series between crystal domains, where no effective template exists for recrystallisation. The degradation of series disorder will have the greatest influence on fibre tensile properties, which fall dramatically even at low levels of hydrolysis. The mechanics of fibrillation are most sensitive to the degradation of lateral disorder, which occurs at a higher rate constant. Soft-touch fabric processing may therefore be possible under conditions where there is a reduced influence on tensile performance. A kinetic model has been proposed to describe the hydrolysis and recrystallisation pathways, which shows that lyocell has longer but thinner crystal domains than viscose or modal fibres, and also a tighter distribution of lateral crystal sizes. Lyocell also has a lower proportion of series disorder and also thinner regions of lateral disorder. This is consistent with the overall greater crystallinity of the original lyocell fibre and the also of the final microscrystalline product.     

Effect of PMMA on crystallization behavior and hydrophilicity of poly(vinylidene fluoride)/poly(methyl methacrylate) blend prepared in semi-dilute solutions

Films of poly(vinylidene fluoride) (PVDF)/poly(methyl methacrylate) (PMMA) blend were derived from a special procedure of casting semi-dilute solutions. Hydrophilic character and crystallization of PVDF were optimized by variation of PMMA concentration in PVDF/PMMA blends. It was found that a PVDF/PMMA blend containing 70 wt% PMMA has a good performance for the potential application of hydrophilic membranes via thermally induced phase separation. The films presented β crystalline phase regardless of PMMA content existed in the blends. Thermal analysis of the blends showed a promotion of crystallization of PVDF with small addition of PMMA which induced larger lamellar thickness of PVDF, leading to the largest spherulitic crystal of PVDF (10 wt% PMMA) is about 8 μm. SEM micrographs illustrated no phase separation occurred in blends, due to the high compatibility between PVDF and PMMA.     

A study on the blending effect of polyvinyledene fluoride in the ionic transport mechanism of plasticized polyvinyl chloride + lithium perchlorate gel polymer electrolytes

The gel polymer electrolytes composed of the blend of polyvinylchloride (PVC) and polyvinylidene fluoride (PVdF) as host polymers, the mixture of ethylene carbonate (EC) and propylene carbonate (PC) as a plasticizer, and LiClO₄ as a salt was studied. An attempt was made to investigate the effect of PVdF in the plasticized PVC + LiClO₄ system in three blend ratios. The differential scanning calorimetry study confirms the formation of polymer–salt complex and miscibility of the PVC and PVdF. The X-ray diffraction results of plasticized PVC (S1, S2, S3) and PVdF-blended films (S4, S5, S6) were compared, in that an increase in PVC concentration decreases the degree of crystallinity for S1 and S3, respectively, but drastically increases for PVC (S2). The increase in PVC content has not accounted in the conductivity studies also noted. However, the blending effect of PVdF showed decreases in crystallinity homogeneously for (S6 > S5 > S4), which were reflected in ionic conductivity measurements. The surface morphology of the films were also studied by scanning electron microscope, and it corroborates the same. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006.     

生物可降解共聚物聚丁二酸/对苯二甲酸丁二醇酯(PBST)的序列结构及结晶性研究

制备了高分子量的聚丁二酸丁二醇酯,并通过与对苯二甲酸二甲酯的无规共聚调节其生物可降解性及力学性能,得到了具有优良机械性能和不同生物降解速度的一系列共聚物,并对共聚物序列结构、热力学性能、结晶性进行了研究.结果表明,该共聚物为无规共聚物,PBS和PBT分别结晶.共聚物的结晶熔点符合无规共聚物的Flory方程.     

Crystallinity and magnetic properties of electrodeposited Co nanowires in porous alumina

Crystalline Co nanowires were pulse electrodeposited into nanoporous aluminum oxide template having an ultra-thinned barrier layer. The effects of off-time between pulses and electrolyte acidity on the microstructure and magnetic properties of the nanowires were investigated. Increasing the off time between pulses increased the crystallinity and the alignment of easy axis with the wire axis. The rate of these increments was seen to depend on the electrolyte acidity and reached its maximum at pH=5.25 electrolyte acidity. Optimizing the crystallinity and crystal orientation, a coercivity value of 3320 Oe and a squareness of>90% were obtained for pure Co nanowires. A 10% increase in coercivity was found after annealing the samples.     

Influence of Amylose-Amylopectin Ratio on Properties of Extruded Starch Plastic Sheets

Abstract

Starch plastic sheets were prepared by extrusion processing of mixtures of granular high-amylopectin and high-amylose starches in the presence of glycerol and water as plasticizers. Amylose content varied between 0 and 70% (w/w). Structural characterization and determination of the mechanical properties of the sheets were performed after aging the materials between 40–65% relative humidity for 2 and 35 weeks and at 90% relative humidity for two weeks. The materials were semicrystalline and viscoelastic. The materials were described as complex heterogeneous multiphase materials. They consisted of amorphous and crystalline phases of amylose and amylopectin as well as granular structures and domains of amylose, amylopectin and amylose-amylopectin helices. Single-helical type crystallinity was formed solely by amylose directly after processing while B-type crystallinity was rapidly formed in amylose-rich materials and slowly during aging of amylopectin-rich materials.

The stress-strain and stress-relaxation properties were related to differences in amylose content, degree of crystallization and water content. The amorphous amylopectin rich materials were flexible and soft but showed an increase in stiffness and a decrease in elongation due to crystallization. Amylopectin-rich materials showed unfavorable relaxation, shrinkage and cracking during aging. The materials rich in amylopectin were sensitive to water content while the amylose-rich materials were not sensitive to water in the range of 9–13% (w/w). Stress-strain relaxation behaviors of the materials were dependent on starch structure and on experimental conditions such as strain rate and extension by which the ratio of elastic and viscous response were varied. An increase in relaxation times was found with increasing amylose content and water content for the materials with solely amylose crystallinity.