A Note on Doubly Connected Surfaces of Constant Mean Curvature with Prescribed Boundary

In this paper we prove the existence of a constant mean curvature surface spanning two given convex curves in parallel planes of ℝ³ under hypotheses relating the distance between the planes, the curvature of the curves and the mean curvature. It is also proved that the surface is a radial graph over a unit sphere.This author was partially Supported by Fapergs. Mathematics Subject Classifications (2000): 53A10, 53C42, 35J60     

Potentiometric sensors for Ag+ based on poly(3-octylthiophene) (POT)

Potentiometric ion sensors were prepared from the conjugated polymer poly(3-octylthiopene) (POT). The influence of additional membrane components, including silver 7,8,9,10,11,12-hexabromocarborane (AgCB₁₁H₆Br₆) and potassium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (KTpFPB) as lipophilic salts, and [2.2.2]p,p,p-cyclophane as silver ionophore, was studied. The membrane components were dissolved in chloroform and membranes were prepared by solution casting on glassy carbon disk electrodes. For comparison, POT-based potentiometric sensors were also prepared by galvanostatic electrosynthesis of POT from the 3-octylthiophene monomer. All the POT-based ion sensors fabricated by solution casting show Nernstian or slightly sub-Nernstian response to Ag⁺, even those based only on POT without any additional membrane components. The potentiometric response of electrochemically polymerized POT depends on the film thickness and the doping anion incorporated in the conducting polymer during polymerization. It is of particular importance that chemically synthesized undoped POT (without any additives) shows a sensitive and selective potentiometric response to Ag⁺ ions although UV-vis results show that POT remains in its undoped form, i.e., POT is not oxidized by Ag⁺. This indicates that undoped POT can exhibit good sensitivity and selectivity to Ag⁺ also in the absence of metallic silver in the polymer film. In this case, the potentiometric response is related to interactions between Ag⁺ and the conjugated polymer backbone. Presented at the 4th Baltic Conference on Electrochemistry, Greifswald, 13–16, 2005     

Hydrogen transfer reaction on the surface of an oxide catalyst

RuO2(110) exposes two kinds of active surface species (acidic and basic centers) that govern the interaction of the gas phase in contact with the catalyst's surface. Here we will elucidate the cooperative interplay of these two active surface sites for a simple model reaction, namely the water formation over RuO2 catalysts when supplying hydrogen and oxygen from the gas phase. The bridging O atoms harvest the hydrogen from the gas phase, while the on-top O atoms pick up those adsorbed hydrogen atoms from the bridging O atoms to form water. This mechanism of hydrogen transfer is mediated by a strong hydrogen bond. Hydrogen transfer is expected to play a vital role for the whole class of catalyzed hydrogenation and dehydrogenation reactions of hydrocarbons over RuO2.     

Optimization of operating conditions of axially and radially viewed plasmas for the determination of trace element concentrations from ultrasound-assisted digests of soil samples contaminated by lead pellets

The method of ultrasound-assisted extraction followed by inductively coupled plasma optical emission spectrometry (ICP-OES) used for the determination of trace element concentrations (arsenic, copper, lead, antimony, and zinc) in shooting range areas was optimized. Optimization was achieved not only on the basis of the analysis of appropriate standard reference materials but also on that of 31 synthetic mixtures of matrix and analyte elements (aluminum, antimony, arsenic, calcium, copper, lead, iron, manganese, silicon, and zinc), in five concentrations. All the measurements were performed in robust plasma conditions which were tested by measuring the Mg II 280.270 nm/Mg I 285.213 nm line intensity ratio. The highest Mg II 280.270 nm/Mg I 285.213 nm line intensity ratios were observed when a nebulizer gas flow of 0.8 L min⁻¹, auxiliary gas flow of 0.2 L min⁻¹ and plasma power of 1400 W were used for both the axially and radially viewed plasmas. The analysis of 31 synthetic mixtures of the selected elements showed that As concentrations could be accurately determined with axially viewed plasma alone. The determination of Pb and Sb could be performed with either axially or radially viewed plasma whereas, surprisingly, Cu could be determined with high accuracy using radial plasma alone with a power of 1400 W. All the elements investigated were determined with high accuracy using robust plasma conditions and a combination of axially and radially viewed plasmas. The total recoveries of elements from SRM 2710 (Montana soil) and SRM 2782 (Industrial sludge) were highly comparable to leach recoveries certified by the National Institute of Standards and Technology (NIST).     

Blood Coagulation and Living Tissue Sterilization by Floating-Electrode Dielectric Barrier Discharge in Air

Thermal plasma discharges have been widely used in the past for treatment of living human and animal tissue. However, extensive thermal damage and tissue desiccation occurs due to extreme temperatures. Some solutions have been offered where the temperature is lowered by short current pulses, addition of noble gases, or significant decrease in the size of treatment electrodes. We propose a method of direct treatment of living tissue that occurs at room temperature and pressure without visible or microscopic tissue damage. The presented Floating-Electrode Dielectric Barrier Discharge plasma is proven electrically safe to human subjects and our results show no gross (visual) or histological (microscopic) damage to skin samples in minutes, complete tissue sterilization from skin flora in seconds, and blood clot formation in seconds of electric plasma treatment. We also observe significant hastening of blood clot formation via electric plasma induced catalysis of “natural” processes occurring in human blood. A model describing these processes is offered.An erratum to this article can be found at     

In vitro degradation of porous poly(dl-lactide-co-glycolide) (PLGA)/bioactive glass composite foams with a polar structure

In vitro degradation of porous 50/50, 70/30 and 90/10 PLGA (poly(dl-lactide-co-glycolide)) foams and PLGA/bioactive glass (20 wt%) composite foams was studied up to 16 weeks in TRIS (pH 7.4; 37 °C). Polar PLGA/bioactive glass composite films were prepared by applying the bioactive glass (S53P4) on one side of the composite. Porous foams were made by solvent casting and pressure quenching with CO₂. The fabricated foams had an initial pore size of 50-500 μm and thickness of 2-2.5 mm. In vitro degradation of the prepared foams was evaluated after 1, 2, 4, 6, 8, 12 and 16 weeks. Weight loss, water uptake, molecular mass and the amount of dissolved bioactive glass were measured after each time period. Changes in pore morphology were analysed with SEM. The present in vitro results will be evaluated and compared with the results from ongoing animal studies where comparable implants are used for bone defect treatment under non-load-bearing conditions.     

LC/MS/MS identification of glycosides produced by biotransformation of cinnamyl alcohol in Rhodiola rosea compact callus aggregates

Cinnamyl alcohol was added to the media of compact callus aggregates (CCA) of Rhodiola rosea for stimulating the production of cinnamyl glycosides. The biotransformation reaction produced high amounts of rosin, while only a very low amount of rosavin was produced. As the consumption rate of cinnamyl alcohol was much higher than production of rosin, the aqueous methanol extracts of compact callus aggregates were studied by liquid chromatography-mass spectrometric methods and four new unexpected biotransformation products of cinnamyl alcohol were identified.     

Ultrasound-assisted extraction in the determination of arsenic,cadmium, copper,lead, and silver in contaminated soil samples by inductively coupled plasma atomic emission spectrometry

An extraction method was developed for the determination of toxic elements in contaminated soil samples by inductively coupled plasma atomic emission spectrometry (ICP-AES). The determination of arsenic, cadmium, lead, and silver in ultrasound-assisted extracts of SRM 2710 and SRM 2711 by ICP-AES was carried out with high accuracy and precision (RSD<3.7%). The certified concentrations of the SRMs were obtained for arsenic, cadmium, lead, and silver by using an ultrasound-assisted extraction method with a digestion solution of (1+1)-diluted aqua regia. The determination of copper in SRMs by the ultrasound-assisted extraction method and analysis by ICP-AES failed to obtain the certified concentrations at the 95% level of confidence using (+/-2 s) as confidence limits of the mean. However, the same results were observed with the use of the microwave digestion method and reflux, which is the ISO 11466 standard method. The analysis of the SRMs showed that the ultrasound-assisted extraction method is highly comparable with the other methods used for such purposes. The major advantages of the ultrasound-assisted extraction method compared to the microwave and reflux methods are the high treatment rate (50 samples simultaneously in nine minutes) and low reagent usage, the main benefit of which are the low chloride and nitrate concentrations in the extracts.     

Direct measurements of controlled aerodynamic forces on a wire-suspended axisymmetric body

A novel in-line miniature force transducer is developed for direct measurements of the net aerodynamic forces and moments on a bluff body. The force transducers are integrated into each of the eight mounting wires that are utilized for suspension of an axisymmetric model in a wind tunnel having minimal wake interference. The aerodynamic forces and moments on the model are altered by induced active local attachment of the separated base flow. Fluidic control is effected by an array of four integrated aft-facing synthetic jet actuators that emanate from narrow, azimuthally segmented slots, equally distributed around the perimeter of the circular tail end. The jet orifices are embedded within a small backward-facing step that extends into a Coanda surface. The altered flow dynamics associated with both quasi-steady and transitory asymmetric activation of the flow control effect is characterized by direct force and PIV measurements.