Influence of external load on friction coefficient of Fe-polytetrafluoroethylene

A coarse-grained molecular dynamics simulation model was developed in this study to investigate the friction process occurring between Fe and polytetrafluoroethylene(PTFE).We investigated the effect of an external load on the friction coefficient of Fe–PTFE using the molecular dynamics simulations and experimental methods.The simulation results show that the friction coefficient decreases with the external load increasing,which is in a good agreement with the experimental results.The high external load could result in a larger contact area between the Fe and PTFE layers,severer springback as a consequence of the deformed PTFE molecules,and faster motion of the PTFE molecules,thereby affecting the friction force and normal force during friction and consequently varying the friction coefficient.     

稀有气体二聚体基准集NgD×15构建及其对DFT方法的评价

基准集是训练和评价量子化学计算方法的重要工具,稀有气体二聚体Ng_2作为重要的弱色散体系,目前为止仍没有一个较为完整、精确的基准集,最近Head Gordon研究组发表MGCD84数据库时,其RG10基准集仍沿用了Tang-Toennies经验势.本文首先以He_2为例,证明了在CCSD(T)水平,使用中点键函数{6s6p6d3f2g1h}的aug-cc-pV5Z基组收敛性;并在CCSD(T)/aug-cc-pV5Z-{6s6p6d3f2g1h}水平下,经BSSE均衡校正后,获得了He_2至Rn_2全部同核稀有气体二聚体的15点相互作用势,构建了NgD×15基准集.并以此为标准,重新评价了目前常用的DFT的非局域和色散校正方法.总体上,非局域校正的精度较D3色散校正高,ωB97X-V及ωB97X-rV两种方法是该体系最优性价比的DFT-NL方法.     

网络系统的控制与优化

<正>近年来,网络系统的控制与优化是国内外科学工作者重点关注的研究领域,该项研究与生物、社会系统和现代工程技术的发展密切相关.多智能体系统是一类具代表性的网络系统,它可普遍用于多机器人的编队控制、空间无人机的分布式队形控制,也可为传感器网络研究以及复杂系统的自主协调控制等提供必要的理论基础.其中的一个典型问题在于理解如何通过仅调节少量个体来控制整个网络系统的行为,这是对网络系统施加控制的一种     

Crystallization of Poly(ethylene adipate) within γ-Phase Poly(vinylidene fluoride) Matrix

The effects of PEA on the γ-phase PVDF crystal structure and the crystallization of PEA within the pre-existing γ-phase PVDF spherulites have been investigated by optical microscopy(OM), infrared spectroscopy(IR) and scanning electron microscopy(SEM). The results demonstrate that the γ-phase PVDF spherulites consist of the lamellae exhibiting a highly curved scroll-like morphology and develop preferentially in PEA-rich blend. With increasing PEA concentration, the scroll diameter increases and the scrolls are better separated from each other. PEA crystallizes first in the interspherulitic region and transcrystalline layer develops. Subsequently, the transcrystalline layer of PEA continues to grow within the γ-phase PVDF spherulites, e.g., in the region between the scrolls, until impinging on other PEA transcrystalline layers or spherulites. The crystallization kinetics results indicate that the growth rate of PEA crystals in the intraspherulitic region of γ-phase PVDF shows a positive correlation with content of PEA, but a negative one with the crystallization temperature of γ-phase PVDF.     

Mass and isotopic concentrations of water-insoluble refractory carbon in total suspended particulates at Mt.Waliguan Observatory(China)

Mass concentration and isotopic values δ¹³C and ¹⁴C are presented for the water-insoluble refractory carbon（WIRC） component of total suspended particulates（TSP）,collected weekly during 2003,as well as from October 2005 to May 2006 at the WMO-GAW Mt.Waliguan（WLG） site.The overall average WIRC mass concentration was（1183±120）ng/m³（n = 79）,while seasonal averages were 2081 ±1707（spring）,454±205（summer）,650±411（autumn）,and 1019±703（winter） ng/m3.Seasonal variations in WIRC mass concentrations were consistent with black carbon measurements from an aethalometer,although WIRC concentrations were typically higher,especially in winter and spring.The δ¹³C PDB value（-25.3 ± 0.8）%.determined for WIRC suggests that its sources are C₃ biomass or fossil fuel combustion.No seasonal change in δ¹³C PDB was evident.The average percent Modern Carbon（pMC） for ¹⁴C in WIRC for winter and spring was（67.2 ± 7.7）%（n = 29）.Lower pMC values were associated with air masses transported from the area east of WLG,while higher pMC values were associated with air masses from the Tibetan Plateau,southwest of WLG.Elevated pMC values with abnormally high mass concentrations of TSP and WIRC were measured during a dust storm event.     

临界的4-规约基及其构造

应用规约理论,研究了临界的4-规约基的构造问题.给出了一种临界的4-规约基的构造方法,证明了格常数α_4=8/5并改进了β-规约基的一个性质.     

一类具非光滑位势p(x)-Laplace方程解的存在性

在非光滑临界点理论的基础上,利用带非光滑(PS)条件的山路引理,结合嵌入定理和Lebourg中值定理,获得了一类具非光滑位势p(x)-Laplace方程解的存在性.     

L-fuzzy层双保序算子空间中的(ω_α,υ_α)-仿紧性

首先在层双保序算子空间中引进了两种(ω_α,υ_α)-仿紧性,证明了它们都是好的推广.其次,给出了它们的若干刻画与性质,并指出了它们保持若干拓扑不变性质.最后,讨论了(ω_α,υ_α)-仿紧性、(ω_α,υ_α)-分离性以及(ω_α,υ_α)-紧性之间的关系.     

g-C3N4催化石墨化碳质材料的制备及光催化性能研究

通常采用以氢氧化物作为造孔剂,过渡金属硝酸盐或氯化物作为石墨化催化剂的传统两步法策略制备多孔石墨化碳材料。然而制备过程中多涉及有毒和腐蚀性试剂,且多步骤的过程耗时较长。本文以双氰胺为原料通过热缩聚反应得到g-C₃N₄,采用高铁酸钾为催化剂一步法实现g-C₃N₄的同步碳化-石墨化,并研究其光催化性能。与传统的两步法相比,该方法耗时少、效率高、无污染。与初始的g-C₃N₄材料相比,石墨化g-C₃N₄衍生碳质材料不仅显著改善了可见光的吸收,而且大大增强了光催化活性。研究了不同石墨化温度对g-C₃N₄衍生碳质材料在可见光下降解甲基橙溶液的影响。700 ℃下制备的衍生碳质材料的降解率为12.4 mg/g。光电化学测试结果表明,多孔g-C₃N₄衍生碳质材料的光生载流子密度、电荷分离和光电流(提高了5.4倍)均得到显著提高。因此,该简便、灵活方法为提高g-C₃N₄衍生碳质材料的吸附和光催化性能提供了一种有前景的、高效的途径。     

DMF体系中Cu2O球晶的制备及形貌分析

以N,N-二甲基甲酰胺(DMF)为溶剂,通过改变铜源和表面活性剂,调控反应参数,溶剂热条件下制备了三维十字形、空心及实心的Cu₂O球晶。利用XRD、SEM等表征手段,分析探讨了工艺条件变化对Cu₂O球晶形貌的影响。研究表明,随着DMF浓度的增大,体系的还原能力增强,Cu⁺增多,溶液的过饱和度增大,Cu₂O晶体集合体形态由晶体结构控制的各向异性与对称性的球晶逐渐向各向同性球晶演变。十二烷基硫酸钠(SDS)、十六烷基三甲基溴化铵(CTAB)、聚乙烯吡咯烷酮(PVP)等表面活性剂有助于降低溶液的过饱和度,增加结晶质的表面扩散能力,有利于规则形态Cu₂O晶粒的形成。反应体系中,Cu(Ac)₂·H₂O水解生成的羧基与DMF中的甲酰基在高温下发生脱羧反应产生CO₂气体以及SDS发泡作用产生的气体是形成空心Cu₂O球晶的重要原因。