氟喹诺酮类药物与牛血清白蛋白作用的研究

用荧光猝灭法研究了ＢＳＡ与ＮＦＬＸ及ＯＦＬＸ之间的相互作用，根据Ｆｏｒｓｔｅｒ的能量转移理论，确定了能量给体－受体间的距离，根据荧光猝灭谐绘制了猝灭曲线，确定其猝灭过程是静态猝灭，用Ｌｉｎｅｗｅａｖｅｒ－Ｂｕｒｋ双倒数曲线测定ＮＦＬＸ－ＢＳＡ和ＯＦＬＸ－ＢＳＡ络合物的离解常数，并详细研究了１０种阳离子，４种阴离子与药物对ＢＳＡ竞争结合的影响，推测了药物与蛋白的主要作用力。     

Monte—Carlo model of the diffusion-limited reaction kinetics in microheterogeneous media. Comparison with the experimental plots of the forward and backward electron phototransfer kinetics on the pore diameter in silica gel

The kinetics of the diffusion-limited decay reaction A + B B was simulated by the Monte—Carlo method on a two-dimensional square lattice with defects presented by randomly distributed sites. The cases were considered where [B] [A] at the random initial distribution (quenching reaction) and [B] = [A] with the initial distribution of the A and B particles on neighboring sites (geminate recombination). The kinetic curves were approximated by the simplest analytical equation [A]/[A]₀ = (1 – )exp[–(kt)^1–h ] + (where k and are constants). The plots of the heterogeneity parameter (h) and time-averaged first-order rate constant vs. concentration of defects (p) or B particles (in the case of quenching) were obtained and compared with similar correlations obtained earlier by the experimental study of the kinetics of forward (quenching reaction) and backward (geminate recombination) electron phototransfer on the surface of different porous silica gels. The experimental plots of h vs. silica gel porosity are in satisfactory agreement with the plots of h vs. p in the model space, if the fraction of volume inaccessible for reactants, calculated from the free silica gel volume, is chosen as the p parameter for silica gel.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1536–1541, August, 2004.     

树枝形聚合物修饰的双8-羟基喹啉光物理研究

研究了树枝形聚合物修饰的双8-羟基喹啉衍生物(Gn-QMQ, n=1~3)在二氯甲烷和乙腈中的荧光猝灭过程和荧光衰减过程. 随着代数n的增加, 猝灭速率常数减小, 核心双8-羟基喹啉基团荧光寿命增长, 非辐射失活速率常数减小. 研究结果表明, 随着代数的增加, 树枝形骨架对核心基团的位点分离作用增大, 在乙腈中树枝形骨架趋于紧密构象, 具有更强的位点分离作用.     

Synthesis and characterization of a novel main chain oxadiazole-based copolymer for n-type solar cell material

A novel oxadiazole-based copolymer has been successfully synthesized through the palladium-catalyzed cross-coupling polycondensation method.The copolymer P is soluble in common organic solvents.Its structure has characterized by ~1H NMR,~(13)C NMR,gel permeation chromatagraphy (GPC),UV-vis absorbance (Abs) and photoluniminescence (PL) spectroscopy,and cyclic voltammetry (CV).Investigation of its optical properties revealed that it is yellow emitting material,and the electrochemical analysis showed that P was well suited poly (2,5-dioctyloxy-p-phenylenevinylene) (PDOCPV) for photovoltaic devices,so the copolymer P is able to act as an electron acceptor in combination with PDOCPV as the electron donor to quench photoluminescence of the copolymer in the blend,indicative of the efficient photoinduced electron transfer from the PDOCPV to the P.     

Development of a new fluorimetric bulk optode membrane based on 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) for nickel(II) ions

A highly sensitive and selective fluorimetric optode membrane for the determination of ultra trace amounts of Ni²⁺ ions was prepared. The plasticized PVC-membrane incorporating potassium tetrakis(p-chlorophenyl)borate (KTpClPB) and 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) (TTBB), as a highly fluorescent chromoionophore, displays a calibration response for Ni²⁺ ions over a wide concentration range of 1.0×10⁻³ to 1.0×10⁻⁸ M. It has a relatively fast response of <40 s. In addition to high stability and reproducibility, and relatively long working lifetime, the sensor possesses good selectivity for nickel ions over several common diverse ions. The fluorescence signal of the optode membrane can be easily recovered by immersion in EDTA solution. The optode was applied successfully to the determination of traces of Ni²⁺ ion in edible oil and a wastewater sample from nickel electroplating industries.     

Singlet quenching of tetraphenylporphyrin and its metal derivatives by iron(III) coordination compounds

The quenching of fluorescence of the free-base tetraphenylporphyrin, H₂TPP, and its metal derivatives, MgTPP and ZnTPP by diverse iron(III) complexes, [Fe(CN)₆]³⁻, Fe(acac)₃, [Fe(mnt)₂]⁻, Fe(Salen)Cl, [Fe₄S₄(SPh)₄]²⁻·, FeTPPCl and [Fe(Cp)₂]⁺ has been studied both in homogeneous medium (CH₃CN) and micellar media, SDS., CTAB and Triton X-100. The quenching efficiencies are analysed in terms of diffusional encounters and it has been possible to separate static quenching components. The quenching constants are dependent on the nature of the ligating atoms around iron(III) and also on the extent of π-conjugation of the ligands. The quenching mechanism has been investigated using steady-state irradiation experiments. Evidence for oxidative quenching by iron(III) complexes was obtained, though the spin multiplicities of the excited electronic states of iron(III) complexes permit both energy and electron transfer mechanisms for quenching of the singlet excited state of the porphyrins.     

Time-resolved fluorescence analysis of the mobile flavin cofactor in p -hydroxybenzoate hydroxylase

Conformational heterogeneity of the FAD cofactor in p-hydroxybenzoate hydroxylase (PHBH) was investigated with time-resolved polarized flavin fluorescence. For binary enzyme/substrate (analogue) complexes of wild-type PHBH and Tyr222 mutants, crystallographic studies have revealed two distinct flavin conformations; the ‘in’ conformation with the isoalloxazine ring located in the active site, and the ‘out’ conformation with the isoalloxazine ring disposed towards the protein surface. Fluorescence-lifetime analysis of these complexes revealed similar lifetime distributions for the ‘in’ and ‘out’ conformations. The reason for this is twofold. First, the active site of PHBH contains various potential fluorescence-quenching sites close to the flavin. Fluorescence analysis of uncomplexed PHBH Y222V and Y222A showed that Tyr222 is responsible for picosecond fluorescence quenching free enzyme. In addition, other potential quenching sites, including a tryptophan and two tyrosines involved in substrate binding, are located nearby. Since the shortest distance between these quenching sites and the isoalloxazine ring differs only little on average, these aromatic residues are likely to contribute to fluorescence quenching. Second, the effect of flavin conformation on the fluorescence lifetime distribution is blurred by binding of the aromatic substrates: saturation with aromatic substrates induces highly efficient fluorescence quenching. The flavin conformation is therefore only reflected in the small relative contributions of the longer lifetimes.     

Cooling Characteristics During Bath Quenching of Test Probe Using Inverse Heat Transfer

It is of engineering importance to accurately predict the surface cooling characteristics in bath quenching of metals and alloys. In this investigation, the surface cooling characteristics in quenching of Wolfson probe are estimated with reasonable accuracy by solving an inverse heat conduction problem. Regularization method is used for smoothening the input temperature measurements at probe center, for superior inversion estimates. The reverse pool-boiling curve is captured on bath quenching characteristic, plotted as cooling velocity versus surface temperature. The prime advantage is the bypassing of convection coefficients, which are uncertain in pool boiling.     

Fluorescence resonance energy transfer between cerium ion(III) and levofloxacin in micellar solution and its analytical application to the determination of levofloxacin

Fluorescence resonance energy transfer between cerium ion(III) and levofloxacin is studied in a micellar solution of cetyltrimethyl ammonium bromide. A non-fluorescent 1:2 complex was formed between excited cerium ion(III) and ground state levofloxacin. The fluorescence of cerium ion(III) is quenched by levofloxacin with the quenching in accordance with the Stern–Volmer relation. The analytical relationship was established between the ratio of the fluorescence of levofloxacin present and absent cerium ion (III) and the concentration of levofloxacin, which helped to estimate the content of levofloxacin directly.     

Friedel-Crafts Polymers. 8. Friedel-Crafts Polycondensation of β-Resorcylic Acid or Resorcinol with p-Xylylene Dichloride,p,p′-Dichloromethyldiphenyl Ether,and p,p′-Dichloroacetyldiphenyl Ether

Friedel-Crafts polycondensation of β-resorcylic acid (BRA) with p-xylylene dichloride (PXDC) or 4,4′-dichloromethyldiphenyl ether (DDE) in dioxane could be effected without simultaneous decarboxylation of BRA. The similar polycondensation of BRA with PXDC, DDE, or 4,4′-dichloroacetyldiphenyl ether (DADE) in nitrobenzene or in the absence of solvent at 150°C was associated with decarboxylation of BRA. Polymers having structures isomeric with those of the polycondensation product of BRA formed with subsequent in situ decarboxylation were prepared by Friedel-Crafts polycondensation of resorcinol with the above dichlorides. All the polymer samples were characterized, and those with related structures were compared. The ion-exchange properties of the polymer sample prepared from BRA and DDE in dioxane were studied.