Influence of Fe-doping on the microstructure and electromagnetic performance of manganese oxides

A simple wet chemical method was used to synthesize Fe-doped MnO₂ composites with iron amount ranging from 0 to 90 M percent. X-ray diffraction, electron probe micro-analyzer, scanning electron microscopy and vector network analyzer were employed to investigate the effect of iron doping on the microstructure and electromagnetic performance of the as-synthesized samples. Results indicate that relative small content of Fe-doping cannot change the α-MnO₂ structure but can promote the formation of hollow-structural morphology. The as-obtained products are transformed into a novel compound (Fe_0.67Mn_0.33)OOH with the increase of Fe-doping to 30 mol%. The possible formation mechanism was proposed in detail. Compared with the pure MnO₂, the Fe-doped samples exhibit decreased dielectric loss but increased magnetic loss with increasing the iron content below 20 mol% while relatively poor electromagnetic properties with the iron content above 30 mol%.     

Mild Synthesis of Pt/SnO2/Graphene Nanocomposites with Remarkably Enhanced Ethanol Electro‐oxidation Activity and Durability

We have designed a new Pt/SnO₂/graphene nanomaterial by using L ‐arginine as a linker; this material shows the unique Pt‐around‐SnO₂ structure. The Sn²⁺ cations reduce graphene oxide (GO), leading to the in situ formation of SnO₂/graphene hybrids. L ‐Arginine is used as a linker and protector to induce the in situ growth of Pt nanoparticles (NPs) connected with SnO₂ NPs and impede the agglomeration of Pt NPs. The obtained Pt/SnO₂/graphene composites exhibit superior electrocatalytic activity and stability for the ethanol oxidation reaction as compared with the commercial Pt/C catalyst owing to the close‐connected structure between the Pt NPs and SnO₂ NPs. This work should have a great impact on the rational design of future metal–metal oxide nanostructures with high catalytic activity and stability for fuel cell systems.     

17O and 33S nuclear magnetic shielding of sulfur trioxides from the experimental measurements and theoretical calculations

In a recent ¹⁷O NMR spectra of liquid sulfur trioxide, several unexpected peaks appeared with the temperature‐dependent integrated peak ratio. In order to interpret NMR spectra and assign peaks to possible molecular structures, the theoretical quantum mechanical density functional theory and Møller–Plesset second‐order perturbation theory calculations were performed. It is suggested that in the liquid sulfur trioxide, apart from monomeric SO₃, a significant amount of (SO₃)₃ cyclic trimers should appear. No theoretical data support hypothesis on (SO₃)₂ dimers formation. Copyright © 2014 John Wiley & Sons, Ltd.     

A Further Extension of Pnictide Oxide Chemistry – Synthesis and Structure of La2AuP2O

The phosphide oxide La₂AuP₂O was synthesized from lanthanum filings, dried La₂O₃, gold pieces, and ground red phosphorus in the ideal 1.33:0.33:1:2 ratio in an evacuated silica tube at 1473 K. Small single crystals were obtained by recrystallization in a NaCl/KCl flux. The structure was determined on the basis of single‐crystal X‐ray diffractometer data: new type, C2/m, a = 1537.3(3), b = 427.39(8), c = 1009.2(2) pm, β = 131.02(1) °, wR₂ = 0.046, 1102 F² values, 38 variables. La₂AuP₂O contains two striking structural motifs: The oxygen atoms are located in La₄ tetrahedra. The latter are cis‐edge‐shared forming polymeric cationic [La₂O]⁴⁺ chains. These cationic units are separated and charge‐balanced by [AuP₂]^4– polyanions which have monovalent gold in distorted trigonal planar phosphorus coordination. Two crystallographically independent phosphorus sites occur in the polyanion, i.e. isolated P^3– besides dumb‐bells P₂^4– (P2–P2 223 pm). La₂AuP₂O, which crystallizes in the form of ruby red transparent crystals, is an electron precise phosphide oxide (4La³⁺)(2Au⁺)(2P^3–)(P₂^4–)(2O^2–).     

A Convenient and Selective Palladium‐Catalyzed Aerobic Oxidation of Alcohols

An efficient procedure for the oxidation of primary and secondary alcohols to aldehydes and ketones, respectively, with molecular oxygen under ambient conditions has been achieved. By applying catalytic amounts of Pd(OAc)₂ in the presence of tertiary phosphine oxides (O?PR₃) as ligands, a variety of substrates are selectively oxidized without formation of ester byproducts. Spectroscopic investigations and DFT calculations suggest stabilization of the active palladium(II) catalyst by phosphine oxide ligands.     

Steric and Electronic Effects on the Configurational Stability of Residual Chiral Phosphorus‐Centered Three‐Bladed Propellers: Tris‐aryl Phosphane Oxides

A series of tris‐aryl phosphane oxides existing as residual enantiomers or diastereoisomers with substituents on the aryl rings differing in size and electronic properties were synthesized and characterized. Their electronic properties were evaluated on the basis of their electrochemical oxidation and reduction potentials together with those of the corresponding “blade bromides” (i.e., the naphthalene derivatives displaying the same substitution pattern of the tris‐naphthyl phosphane oxide blades, with a bromo substituent where the phosphorus atom is located) determined by CV. The residual stereoisomeric phosphane oxides were isolated in a stereochemically pure state and were found to be highly configurationally stable at room temperature (stereoisomerization barriers of about 27 kcal mol^?1). The chiroptical properties of the residual stereoisomers and the assignments of absolute configuration are discussed. The configurational stability of residual tris‐aryl phosphane oxides was found to be scarcely influenced by the electronic properties of the substituents present on the aromatic rings constituting the blades, while steric effects play the most relevant role. Detailed theoretical calculations are in agreement with the experimental results and also contribute to a rational interpretation of the stereodynamics of these systems.     

Mechanistic Dichotomy in the Asymmetric Allylation of Aldehydes with Allyltrichlorosilanes Catalyzed by Chiral Pyridine N‐Oxides

Detailed kinetic and computational investigation of the enantio‐ and diastereoselective allylation of aldehydes 1 with allyltrichlorosilanes 5 , employing the pyridine N‐oxides METHOX ( 9 ) and QUINOX ( 10 ) as chiral organocatalysts, indicate that the reaction can proceed through a dissociative (cationic) or associative (neutral) mechanism: METHOX apparently favors a pentacoordinate cationic transition state, while the less sterically demanding QUINOX is likely to operate via a hexacoordinate neutral complex. In both pathways, only one molecule of the catalyst is involved in the rate‐ and selectivity‐determining step, which is supported by both experimental and computational data.     

钴铁双金属氧化物多孔纳米棒的制备及其电解水析氧性能

通过简单的钴铁前躯体热分解法制备了系列一维Co_1-xFe_xO_y（0≤x≤1）多孔纳米材料,并在1 mol·L^-1 KOH溶液中研究了其电解水析氧催化性能。研究发现不同Fe掺杂量对材料的结构与电解水析氧催化性能有较大的影响,其中16%（n/n）Fe掺杂量的Co_1-xFe_xO_y具有最优的析氧催化性能。在10 mA·cm^-2电流密度下其析氧过电位为345 mV,塔菲尔斜率为54 mV·dec^-1,并表现出优异的析氧稳定性能。廉价、高效的Co_1-xFe_xO_y多孔纳米棒材料有望成为优良的析氧催化剂用于电解水制氢。