Quartz crystal microbalance simulation of the directionality of Si etching in CF4 glow discharges

Two quartz crystal microbalances have been mounted in a planar rf discharge system in such a way that the potential of the microbalances with respect to the glow discharge can be varied. This apparatus allows a rapid simulation of the etching directionality that can be expected in real pattern transfer situations in that operating one microbalance at ground and one at a negative potential gives a measure of the sidewall and vertical etch rates, respectively. The voltage threshold for ion-assisted etching has been determined to be 20 V which is the approximate value of the plasma potential in this asymmetric system.     

一种激光扫描水下成像系统的衰减长度值研究

简述了水下目标激光成像方法和优点。并描述了一种水下连续蓝绿激光点扫描，微光增强ＣＣＤ面成像实验系统。分析了该系统的物理模型和计算公式。验证：处于对比度极限模式工作时。在水质及目标确定条件下，该值也许可成为判断系统优劣的依据。     

Towards a Fundamental Understanding of the Mechanics of Crystal Agglomeration: A Microscopic and Molecular Approach

A novel experimental apparatus has been developed which enables the measurement of adhesion forces between two crystals suspended in a supersaturated solution and allowed to agglomerate over a fixed time period. The geometry of the crystal surfaces at the contact points and the dynamic development of the bond are captured on video and characterised using an image analysis technique. The experimental apparatus has been designed to allow control of supersaturation, orientation of crystal faces, distance between crystals, relative movement of crystals and contact time. The experimental results show that the agglomerate bond strength, expressed as the agglomerate adhesion force per unit contact area, increases with increasing supersaturation and is higher for faster growing faces than for slower growing faces. In addition, a qualitative comparison has been made between the measured force and a theoretical estimation of the interaction force between crystal faces, determined through molecular modelling. It is shown that the speed of approach of two opposing crystal faces is a key parameter in the nature of the subsequent bond, as is their atomic structure.     

一种全场三维共焦检测的新方法

提出了一种利用微光学阵更合成器件实现全场三维面形并行检测、记录的共焦方法。此方法的关键是，在共焦系统中引入一一微光学耻列合成器件来产生一点光源阵列，实现了对同一一剖面同时并行检测，并首次采用了ＣＣＤ面阵像元取代上孔光阑直接截取三维信息光强。本文讨论了该方法的三信息检测原理，响应关系，给出了初步的实验结果和三维重构图。     

微小尺度下自然对流换热特性实验研究

采用直接电加热法对平均为101 μm、403μm及801μm的铜丝进行加热,使用高精度电阻仪测量电加热前及电加热后的铜丝的电阻值,根据温度与金属电阻之间的关系能够相当精确的测量整个铜丝电加热后的平均温度值。电加热时的电压及电流也同时被测量。实验结果表明,在自然对流条件下,实验得到的努谢尔特数与经典的准则关联式得到的努谢尔特数随着外径的减小,其偏差越来越大,最大偏差超过50％。     

氧化锆陶瓷的摩擦磨损行为与机理

氧化锆陶瓷的工程应用前景广阔，在许多场合都必须与水或水溶液接触，但有关这种陶恣在水中的摩擦磨损行为和机理的研究报道不多见，而且已有的工作也不够深入。因此，对氧化锆陶瓷分别在水润滑和干摩擦下的摩擦学特性及其磨损机理进行了考察。     

微力矩导弹舵机负载模拟器的理论研究

以某型号反坦克导弹舵机为对象，对一种称之为微力矩负载模拟器进行了研究。根据该型号导弹舵机的特点，对系统关键元件的选择设计进行了分析，建立了系统的数学模型，并通过分析多余力矩的产生机理，对系统进行了多余力矩补偿和校正，最后进行了仿真分析。     

Dynamics problems of micro/nano channel resonators for detection and characterization

微纳通道机械谐振器在液体环境中具有超高的谐振频率、品质因子和灵敏度,常用于液体环境中的高精度检测与表征,在生物、医药、化工等领域有着广阔的应用前景.微纳通道机械谐振器的检测与表征功能高度依赖其动力学特性,而此类器件是由谐振结构、内部流体、被检测物和外部激励等多因素组成的耦合系统,涉及的动力学问题较为复杂,已成为谐振器件研究中的前沿热点和瓶颈问题.本文综述了微纳通道机械谐振器的研究进展,总结了谐振器件实现高精度检测与表征功能时的动力学设计原理,详细讨论了谐振器件的稳定性、频响特性、能量耗散、频率波动等动态特性,阐明了不同动力学问题的物理机制及其对谐振器性能的影响规律,可为深入厘清微纳通道机械谐振器的动力学设计问题,提高器件动态性能提供理论参考和技术支撑,对超高频、超高灵敏度谐振器的设计、制造及应用发展具有重要意义.     

Contrasting Response of Two Dipolar Fluorescence Probes in a Leucine‐Based Organogel and Its Implications

The microenvironments of a leucine‐based organogel are probed by monitoring the fluorescence behavior of coumarin 153 (C153) and 4‐aminophthalimide (AP). The steady‐state data reveals distinctly different locations of the two molecules in the gel. Whereas AP resides close to the hydroxyl moieties of the gelator and engages in hydrogen‐bonding interactions, C153 is found in bulk‐toluene‐like regions. In contrast to C153, AP exhibits excitation‐wavelength‐dependent emission, indicating that the environments of the hydrogen‐bonded AP molecules are not all identical. A two‐component fluorescence decay of AP in gel, unlike C153, supports this model. A time‐resolved fluorescence anisotropy study of the rotational motion of the molecules also reveals the strong association of only AP with the gelator. That AP influences the critical gelation concentration implies its direct involvement in the gel‐formation process. The results highlight the importance of guest–gelator interactions in gels containing guest molecules.     

Direct Insight into the Three‐Dimensional Internal Morphology of Solid–Liquid–Vapor Interfaces at Microscale

Solid–liquid–vapor interfaces dominated by the three‐phase contact line, usually performing as the active center in reactions, are important in biological and industrial processes. In this contribution, we provide direct three‐dimensional (3D) experimental evidence for the inside morphology of interfaces with either Cassie or Wenzel states at micron level using X‐ray micro‐computed tomography, which allows us to accurately “see inside” the morphological structures and quantitatively visualize their internal 3D fine structures and phases in intact samples. Furthermore, the in‐depth measurements revealed that the liquid randomly and partly located on the top of protrusions on the natural and artificial superhydrophobic surfaces in Cassie regime, resulting from thermodynamically optimal minimization of the surface energy. These new findings are useful for the optimization of classical wetting theories and models, which should promote the surface scientific and technological developments.