A New Colorimetric Platform for Protein Detection Based on Recognition‐Induced Cascade of Polymeric Nanoparticles Disassembly

Despite great progress, it is still of high interest to explore new homogeneous assays for simple, visual, and selective protein detection. Herein, one new colorimetric sensor has been developed for visual detection of protein by using polymeric micelles as a sensing scaffold and the molecular recognition between protein and the ligand on the surface of the polymeric micelles as the driving force to trigger the readout of the detection signal. The polymeric micelles formed via the self‐assembly of the amphiphilic block polymer biotin‐labeled poly(ethylene glycol)‐block‐poly(3‐acryl aminophenylboronic acid) are endowed with colorful feature by incorporation of alizarin red S (ARS) into the hydrophobic core. Based on the response to streptavidin recognition, these micelles are further disintegrated through the competitive binding of α‐cyclodextrin with boronic acid for disassociation of ARS, which achieves orange–yellow to pink–purple transition in 2 h. This work will open the way to develop one new mix‐and‐measure, visual, and homogeneous assay.     

Quantitation of memantine hydrochloride bulk drug and its tablet formulation using proton nuclear magnetic resonance spectrometry

The use of quantitative nuclear magnetic resonance spectrometry for the determination of non‐UV active memantine hydrochloride with relative simplicity and precision has been demonstrated in this study. The method was developed on a 500 MHz NMR instrument and was applied to determination of the drug in a tablet formulation. The analysis was performed by taking caffeine as an internal standard and D₂O as the NMR solvent. The signal of methyl protons of memantine hydrochloride appeared at 0.75 ppm (singlet) relative to the signal of caffeine (internal standard) at 3.13 ppm (singlet). The method was found to be linear (r² = 0.9989) in the drug concentration range of 0.025 to 0.80 mg/ml. The maximum relative standard deviation for accuracy and precision was <2. The limits of detection and quantification were 0.04 and 0.11 mg/ml, respectively. The robustness of the method was revealed by changing nine different parameters. The deviation for each parameter was also within the acceptable limits. The study highlighted possibility of direct determination of memantine hydrochloride in pure form and in its marketed tablet formulation by the use of quantitative NMR, without the need of derivatization, as is the requirement in HPLC studies. Copyright © 2016 John Wiley & Sons, Ltd.     

Computer Assisted Spectrophotometric Analysis of Three Component Mixtures (Caffeine Mixtures and Codeine Mixtures)

Abstract

Two mixtures (caffeine mixture (I) and codeine mixture (II)) of 3-components, containing acetaminophen and salicylamide as majors, have been assayed using different computer-assisted spectrophotometric methods. These methods are the Unique Absorbance Method (UAM), the Unique Orthogonal Function Method (UOFM), and Unique Fourier Function Method (UFFM), and also their correspondences under the least squares approach. The parameters have been optimized for the accurate determination of the minor component caffeine in mixture (I). In mixture (II), however. codeine has been extracted - in two steps-prior to the correction of interferences from the major components acetaminophen and salicylamide.     

Synthesis of Novel Bisphosphonate Inhibitors of Phosphoglycerate Kinase (3-PGK) (E.C.2.7.2.3)

Abstract

Novel, aromatic bisphosphonates have been synthesised as non-systematic analogues of 1,3-bisphosphoglyceric acid (1,3-BPG). These incorporate non-scissile α-halo and α-methylene phosphonates and have submicromolar K _i values for 3 -PGK.     

Identification of mechanisms of toxic action for skin sensitisation using a SMARTS pattern based approach

Skin sensitisation is a key endpoint under REACH as it is costly and its assessment currently has a high dependency on animal testing. In order to reduce both the cost and the numbers of animals tested, it is likely that (quantitative) structure–activity relationships ((Q)SAR) and read-across methods will be utilised as part of intelligent testing strategies. The majority of skin sensitisers elicit their effect via covalent bond formation with skin proteins. These reactions have been understood in terms of well defined nucleophilic–electrophilic reaction chemistry. Thus, a first step in (Q)SAR analysis is the assignment of a chemical's potential mechanism of action enabling it to be placed in an appropriate reactivity domain. The aim of this study was to design a series of SMARTS patterns capable of defining these reactivity domains. This was carried out using a large database of local lymph node assay (LLNA) results that had had potential mechanisms of action assigned to them using expert knowledge. A simple algorithm was written enabling the SMARTS patterns to be used to screen a database of SMILES strings. The SMARTS patterns were then evaluated using a second, smaller, test set of LLNA results which had also had potential mechanisms of action assigned by experts. The results showed that the SMARTS patterns provided an excellent method of identifying potential electrophilic mechanisms. The findings are supported, in part, by molecular orbital calculations which confirm assignment of reactive mechanism of action. The ability to define a chemical's potential reaction mechanism is likely to be of significant benefit to regulators and risk assessors as it enables category formation and subsequent read-across to be performed.     

粮谷中8种痕量真菌毒素的定量分析方法

建立了大米、小麦和大豆中黄曲霉毒素B1、黄曲霉毒素B2、黄曲霉毒素G1、黄曲霉毒素G2、伏马毒素B1、伏马毒素B2、柄曲霉素和异烟棒曲霉素C 8种真菌毒素的高效液相色谱-串联质谱(HPLC-MS/MS)分析方法。样品加入正己烷去除油脂,用60%乙腈振荡液液分配提取,取乙腈水层过滤膜后分析。在电喷雾电离(ESI)正离子模式下采用多反应监测(MRM)进行测定。定量方法采用同位素内标稀释法,8种真菌毒素在各自浓度范围内线性关系良好,线性系数均不低于0.997 0。空白样品的加标回收率为77%～123%,相对标准偏差(RSD)为0.6%～13.3%。该方法操作简单、灵敏度高,可用于粮谷中真菌毒素的检测。     

Design of Sensitive Biocompatible Quantum‐Dots Embedded in Mesoporous Silica Microspheres for the Quantitative Immunoassay of Human Immunodeficiency Virus‐1 Antibodies

A novel sandwich‐type electrochemiluminescence (ECL) immunosensor was developed to enable the sensitive detection of HIV‐1 antibodies. This system incorporated mesoporous silica (mSiO₂) complexed with quantum dots (QDs) and nano‐gold particles, which were assembled to enhance signal detection. Magnetic beads were used by immobilizing the secondary anti‐IgG antibody. This was first employed to capture HIV‐1 antibody (Ab) to form a Fe₃O₄/anti‐IgG/Ab complex. A high loading and signal‐enhanced nanocomposite (hereafter referred to as Au‐mSiO₂‐CdTe) was used as a HIV‐1 antigen label. The Au‐mSiO₂‐CdTe nanocomposite was conjugated with the Fe₃O₄/anti‐IgG/Ab complex to form an immunocomplex (hereafter referred to as Fe₃O₄/anti‐IgG/Ab/HIV‐1/CdTe‐mSiO₂‐Au). This complex could be further separated by an external magnetic field to produce ECL signals. Due to the large specific surface area and pore volume of mSiO₂, the loading of the CdTe QDs was markedly increased. Thus, the loaded QDs released a powerful chemiluminescent signal with a concordantly increased sensitivity of the immunosensor. The immunosensor was highly sensitive, and displayed a linear range of responses for HIV‐1 antibody across a dilution range of 1 : 1500 through 1 : 50 with the detection limit of 1 : 4500. The immunoassay can be a promising candidate in early diagnosis of HIV infection.     

Chemiluminescent enzyme-linked immunosorbent assay on a strip to detect Escherichia coli O157:H7

A fast and sensitive chemiluminescent enzyme-linked immunosorbent assay method to measure pathogenic bacteria, Escherichia coli O157:H7, on immuno-chromatographic membrane was studied. Non-specific binding of proteins on membrane strip was controlled to attain the best performance of immunosensor by optimising the composition of a running buffer. The specificity of the proposed immunostrip was confirmed by conducting experiments for four different micro-organisms. A chemiluminescent signal could be successfully generated from a proposed immunostrip sensing system, and a significant change in the chemiluminescent light intensity with the concentration of target microbes was obtained. E. coli O157:H7 could be quantitatively measured in the range of 1.1?×?10^3?–1.1?×?10⁷ CFU (colony forming units) mL^?1 within 16?min by using the developed chemiluminescent immunostrip.     

Contamination of therapeutic human immunoglobulin preparations with apolipoprotein H (β2‐glycoprotein I)

Polyclonal immunoglobulin (Ig) concentrates are important biological medicinal products and the assurance of their quality and safety is crucial. In our present approach we used proteomic methods to check the purity of commercial Ig products of different origin. The experimental setup included nonreducing 2DE or DIGE combined with MALDI‐TOF and the thrombin generation assay, a routine safety test for pharmaceutical Ig preparations, and was complemented by a specific immunoassay. 2DE patterns displayed contaminations with trace amounts of human apolipoprotein H (Apo‐H), transferrin, albumin, and its fragments. In contrast to the latter, Apo‐H is a protein that is active in the coagulation cascade, and thus a potential involvement in thromboembolic events in vivo cannot be excluded. It was found by 2DE and MALDI‐TOF to be a contaminant of several Ig preparations. Spiking experiments of Ig preparations with pure Apo‐H demonstrated an Apo‐H concentration dependent increase in thrombin generation assay values. Traces of Apo‐H are possibly also contributing to unwanted side effects, as already known for factor XIa. The significance of Apo‐H contaminations for these side effects might be verified by detailed analyses of pharmacovigilance data.