Molecular dynamics studies on the local disordering of Σ3 and Σ11 grain boundaries in aluminium bicrystal

Molecular dynamics (MD) simulations using Morse interaction potential are performed in studies of [110] symmetrical tilt grain boundary (GB) structures with mis-orientation angles 50.5°(Σ11), 129.5°(Σ11), 70.5°(Σ3) and 109.5°(Σ3) at various tempratures. The GB structures are found to start local disordering at about 0.5T _m (T _m is the melting point of aluminium) for 50.5°(Σ11), 0.32T _m for 129.5° (Σ11) and 0.38T _m for 70.5°(Σ3), respectively. These results agree with conclusions deduced from the anelastic measurements. But, for twin-boundary structure 109.5°(Σ3), this disordering has not been found even when temperature increases up to 0.9T _m . The project supported by the National Natural Science Foundation of China and Laboratory for Non-linear Mechanics of Continuous Media, Institute of Mechanics, Academia Sinica.     

Crystal growth of calcium carbonate on the cellulose acetate/pyrrolidon blend films in the presence of L-aspartic acid

The morphogenesis and growth process of calcium carbonate on the cellulose acetate/polyvinyl pyrrolidone (CA/PVP) blend films in the presence of L-aspartic acid was carefully investigated. The results showed that the concentration of L-aspartic acid, the initial pH value of reaction solution and temperature turned out to be important factors for the control of morphologies and polymorphs of calcium carbonate. Complex morphologies of CaCO₃ particles, such as cubes, rose-like spheres, twinborn-spheres, cone-like, bouquet-like, etc. could be obtained under the different experimental conditions. The dynamic process of formation of rose-like sphere crystals was analyzed by monitoring the continuous morphological and structural evolution and components of crystals in different crystal stages. This research may provide a promising method to prepare other inorganic materials with complex morphologies.     

A novel biological strategy for morphology control of PbWO4 crystals in tomato extract

PbWO(4) crystals were readily synthesized by reacting lead oxide (PbO(2)) with sodium tungstate (Na(2)WO(4)·2H(2)O) at room temperature in the presence of tomato extract. Biomolecules such as vitamins, proteins in the extract played both the roles of reductant and template. The size and morphology of the PbWO(4) crystals could be controlled by adjusting the concentration of the reactants. When the concentration ratio of PbO(2) and Na(2)WO(4) was increased, the morphologies of the products varied from spherical to fusiform. Room-temperature fluorescence spectra indicated the products had a slight blue shift compared to the solid structure, which may be due to the structure defects in the crystals. The possible mechanism of PbWO(4) crystal growth in tomato extract was discussed.     

A novel anti-interference and pH-modulation device: application to enzyme-free glucose detection

We report on a novel anti-interference and pH-modulation device (herein after referred to as ??device??). It is based on electrodialysis and can continuously increase the pH value of the carrier solution and - at the same time - remove interfering analytical signals obtained for ascorbic acid (AA) and uric acid (UA). The ??device?? was coupled to the FIA-amperometric detection of glucose. The linear range is from 1???mol?L^?1 to 0.4?mmol?L^?1, with a sensitivity of 213???A?cm^?2?mM^?1 and a detection limit of 1???mol?L^?1 at a signal-to-noise ratio of 3. The method was used to sucessfully determine glucose in serum. This study represents a novel technique for overcoming analytical interference and is expected to find applications in liquid chromatography, for example in on-line pH-modulation if different pH values are needed for separation and detection.

Sorption mechanisms of cadmium onto nano-hydroxyapatite: Comparative uptake studies and correlative solubility analysis

Hydroxyapatite (HAP) nanorod was synthesized by using ordered bicontinuous microemulsion, and was characterized by X-ray diffraction spectrum, scanning electron microscopy and high-resolution transmission electron microscopy. The solubility was investigated using ion chromatogram measurement, and was sensitively dependent on the value of pH. The capabilities to capture cadmium ions of HAP nanorods and micro-particles from aqueous salt solution were studied, and besides, X-ray diffractometry was used in order to characterize the mechanisms of cadmium uptake. As Cd²⁺ adsorption occurred, it has undergone the coprecipitation of Cd₂P₂O₇ crystal to give multiple solids composed of HAP and Cd₂P₂O₇ crystallites, which affected the dissolution of hydroxyapatite. During Cd²⁺ sorption process, solubility variations of the sediments showed a more complex pattern than previously reported. Contribution of surface mechanisms, in association with precipitation of cadmium phosphate phases, could explain this behavior.     

钯催化烯烃不对称羰基化反应的研究进展

钯催化烯烃不对称羰基化反应是一种合成手性羰基化合物的有效方法之一,综述了近年来钯催化烯烃不对称羰基化反应的最新研究进展,重点讨论了配体、催化体系、反应条件等因素对烯烃羰基化反应的影响,并对烯烃不对称羰基化反应的区域选择性和对映选择性以及可能的反应机理进行了探讨.     

A tunable single-component warm white-light Sr3Y(PO4)3:Eu2+,Mn2+ phosphor for white-light emitting diodes

The photoluminescence properties and energy transfer of the Eu(2+) and Mn(2+) co-doped Sr(3)Y(PO(4))(3) phosphors are investigated in detail. Two main emission bands attributed to the Eu(2+) and Mn(2+) ions are observed under UV light excitation via an efficient energy transfer process. When the Eu(2+) doping content is fixed, the emission chromaticity can be varied by simply adjusting the content of Mn(2+). The study of the behavior as a function of doping concentration indicates that the warm white-light can be obtained in a single host lattice. Furthermore, the analysis of the fluorescence decay curves based on the Inokuti-Hirayama theoretical model reveals that the dipole-quadrupole interaction is mainly responsible for the energy transfer mechanism from the Eu(2+) to Mn(2+) ions in the Sr(3)Y(PO(4))(3) phosphor. The developed phosphor exhibits a strong absorption in UV spectral region and white-light emission which may find utility as a single-component white-light-emitting UV-convertible phosphor in white LED devices.     

Phosphotungstic acid functionalized silica nanocomposites with tunable bicontinuous mesoporous structure and superior proton conductivity and stability for fuel cells

A novel proton exchange membrane using phosphotungstic acid (HPW) as proton carrier and cubic bicontinuous Ia3d mesoporous silica (meso-silica) as framework material is successfully developed as proton exchange membranes for fuel cells. Meso-silica is functionalized by 80wt% HPW using a vacuum impregnation method. The HPW-functionalized meso-silica (HPW-meso-silica) nanocomposites are characterized by transmission electron microscopy (TEM), small angle X-ray scattering (SAXS), N(2) adsorption/desorption isotherms, thermogravimetric analysis (TGA), water uptake and four-probe conductivity. The results show that the mesoporous structure of silica hosts can be altered by the hydrothermal temperature. Conductivity measurements indicate that meso-silica host with pore diameter of 5.0 nm has the highest proton conductivity of 0.11 S cm(-1) at 80 °C and 100% relative humidity (RH) with an activation energy of ～14 kJ mol(-1) and better stability as compared to that with large mesopores. The proton conductivity and performance of HPW-meso-silica nanocomposites also increase with the RH, but it is far less sensitive to RH changes as compared to conventional perfluorosulfonic acid (PFSA) polymers such as Nafion. The maximum power density of the cell with HPW-meso-silcia nanocomposite membranes is 221 mW cm(-2) at 80 °C and 100% RH and decreases to 171 mW cm(-2) when RH is reduced to 20%, a 20% decrease in power output. In the case of a cell with Nafion 115 membranes, the decrease in power density is 95% under identical test conditions. The results demonstrate that the HPW-meso-silica nanocomposite has an exceptionally high water retention capability and is a promising proton exchange membrane material for fuel cells operating at reduced humidity and elevated temperatures.     

涉及CM分担值的常系数指数多项式的唯一性

主要证明了两个非常数的常系数指数多项式,如果在复平面中4个张角严格大于π的每一个角域内都有1个有穷的CM分担值,且这4个分担值是判别的,则它们必然恒等.