Radial flow velocity profiles of a yield stress fluid between smooth parallel disks

In rock grouting, idealized 2D-radial laminar flow of yield stress fluids (YSF) is a fundamental flow configuration that is used for cement grout spread estimation. A limited amount of works have presented analytical and numerical solutions on the radial velocity profiles between parallel disks. However, to the best of our knowledge, there has been no experimental work that has presented measured velocity profiles for this geometry. In this paper, we present velocity profiles of Carbopol (a simple YSF), measured by pulsed ultrasound velocimetry within a radial flow model. We describe the design of the physical model and then present the measured velocity profiles while highlighting the plug-flow region and slip effects observed for three different apertures and volumetric flow rates. Although the measured velocity profiles exhibited wall slip, there was a reasonably good agreement with the analytical solution. We then discuss the major implications of our work on radial flow.

     

Application of Linear Viscoelastic Continuum Damage Theory to the Low and High Strain Rate Response of Thermoplastic Polyurethane

Experimental Mechanics - Understanding the mechanical response of elastomers to applied deformation at different strain rates and temperatures is crucial in industrial design and manufacture;...     

A Sm(III) Coordination Polymer Containing 2,5-Furandicarboxylic Acid: Crystal Structure and Recognition of Oxalate in Water

Crystallography Reports - The {[Sm2(FDC)2](FDC) · 10H2O}n complex, where H2FDC is a 2,5-furandicarboxylic acid, has been prepared by hydrothermal reaction and structurally characterized by...     

Photo-recycling the Sacrificial Electron Donor: Towards Sustainable Hydrogen Evolution in a Biphasic System

H₂ may be evolved biphasically using a polarised liquid|liquid interface, acting as a “proton pump”, in combination with organic soluble metallocenes as electron donors. Sustainable H₂ production requires methodologies to recycle the oxidised donor. Herein, the photo-recycling of decamethylferrocenium cations (DcMFc⁺) using aqueous core-shell semiconductor CdSe@CdS nanoparticles is presented. Negative polarisation of the liquid|liquid interface is required to extract DcMFc⁺ to the aqueous phase. This facilitates the efficient capture of electrons by DcMFc⁺ on the surface of the photo-excited CdSe@CdS nanoparticles, with hydrophobic DcMFc subsequently partitioning back to the organic phase and resetting the system. TiO₂ (P25) and CdSe semiconductor nanoparticles failed to recycle DcMFc⁺ due to their lower conduction band energy levels. During photo-recycling, CdS (on CdSe) may be self-oxidised and photo-corrode, instead of water acting as the hole scavenger.     

Modeling ExB drift transport in conceptual slot divertor configurations

At DIII-D, a slot divertor concept, called small-angle-slot (SAS), is under development, aiming to enable detachment at relatively low plasma edge density. We report on simulations using the SOLPS-ITER two-dimensional edge code to examine the performance of conceptual “SAS 2” slot configurations. The focus of the analysis is on E  ×  B drift effects on upstream density at detachment (UDD), with detachment marked by electron temperature T_e ≤ 3 eV at the outer strike point (OSP). With toroidal field such that radial E  ×  B drift carries particles from the OSP towards the private flux region (PFR), placing the OSP near the inner slot wall gives ≈20% lower UDD than having the OSP near the outer wall. The inner wall effectively traps the radial E  ×  B drift flux, resulting in low T_e and associated radial electric field in the PFR, and thus small losses from the slot to the inner target via poloidal E  ×  B drift flux. With toroidal field reversed such that radial E  ×  B drift is reversed, OSP placement near the inner wall gives ≈10% lower UDD than OSP placement near the outer wall. Although radial E  ×  B flux is from the OSP towards the outer wall, this flux largely escapes the slot, raising the UDD. A change in the slot shaping is suggested with the goal of eliminating such E  ×  B -driven particle losses from the slot.     

Theoretical Study of Endohedral Fullerenes M@C60 (M = Li,Na, or K) in Periodic Boundary Conditions

Journal of Experimental and Theoretical Physics - Density functional calculations in periodic boundary conditions (PBCs) were performed to investigate the structural and electronic properties of...     

A Lumped Parameter Model of a Fibre-Reinforced Composite Plate with Temperature Dependence Based on Thermal Vibration Measurements

Experimental Mechanics - Background: Experimental modelling techniques are still rare for composite structures under complex thermal environments. Objective: In this paper, by taking a...     

XPS and resistive studies on thin films of a copper(II)‐based coordination polymer deposited on functionalized interdigital electrodes

A symmetrical 2‐thiopyrimidine based molecule with an expanded π‐electron system is synthesized and used to form a self‐assembled monolayer (SAM) on gold surfaces. Utilizing chemical vapor deposition a monolayer of (3‐mercaptopropyl)triethoxysilane is formed on silicon dioxide substrates. Both of these SAM coated substrates are characterized by X‐ray photoelectron spectroscopy and the growth of a coordination polymer built up from 5,5′‐(ethyne‐1,2‐diyl)bis(2‐hydroxyacetophenone) and copper(II) on dual SAM coated transducers is studied. After the deposition procedure on interdigital electrodes the electrical properties of the polymer are investigated performing resistive measurements. A significant change of the resistance, which depends on the surrounding atmosphere, proves the sensing behavior of the synthesized coordination polymer. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 335–344