SPATIAL AND SEASONAL DISTRIBUTIONS OF ATMOSPHERIC CARBONACEOUS AEROSOLS IN PEARL RIVER DELTA REGION, CHINA

Concentrations and spatial distributions of organic carbon (OC) and elemental carbon (EC) in atmospheric particles were measured at 8 sites in four cities (Hong Kong, Guangzhou, Shenzhen and Zhuhai) of Pearl River Delta Region (PRDR), China during 2001 winter period and 2002 summer period. PM2.5 (particie diameter smaller than 2.5 um) and PM10 (particie diameter smaller than 10 um) samples were collected on pre-fired quartz filters with mini-volume samplers and analyzed using thermal optical reflectance (TOR) method. The average PM2.5and PM10 Ievel were 60.1 and 93.1 μg·m-3, respectively, with PM2.5 constituting 65.3% of the PM10 mass. The average OC and EC concentrations in PM2.5 were 12.0 and 5.1 μg·m-3, respectively, while those in PM10 were 16.0 and 6.5 μg·m-3, respectively. The carbo-naceous aerosol accounted for 37.2% of the PM2.5 and 32.8% of the PM10. The highest concentrations of OC and EC were observed at Guangzhou city in both vvinter and summer seasons. The average OC/EC ratios were 2.     

Bifurcation of flow and mass transport in a curved blood vessel

A numerical analysis of flow and concentration fields of macromolecules in a, slightly curved blood vessel was carried out. Based on these results, the effect of the bifurcation of a flow on the mass transport in a curved blood vessel was discussed. The macromolecules turned out to be easier to deposit in the inner part of the curved blood vessel near the critical Dean number. Once the Dean number is higher than the critical number, the bifurcation of the flow appears. This bifurcation can prevent macromolecules from concentrating in the inner part of the curved blood vessel. This result is helpful for understanding the possible correlations between the blood dynamics and atherosclerosis. The project supported by National Natural Science Foundation of China (10002003), JSPS Postdoctoral Fellowship for Foreign Researcher and Foundation for University Teachers, the Ministry of Education     

昆虫拍翼方式的非定常流动物理再探讨

基于提出的理论模化方法来探讨昆虫拍翼方式的非定常流动物理. 以悬停飞行为 例，通过对拍翼运动的分析，不仅解释了昆虫利用高频拍翼的方式为何能够克服低雷诺数带 来的气动局限性(St \gg 1/Re)，而且还指出高升力产生和调节的3个流动 控制因素：(1) 由于拍翼的变速运动即时引起了流体动力响应，这种附加惯性效应 可产生瞬时的高升力; (2) 保持前缘涡不脱离翼面有助于减少升力的下降; (3) 增大后缘涡的强度并加速其脱离后缘能够有效地提高升力.     

沉淀对A1-Cu—Mg合金中锯齿形屈服现象影响及其微观实验研究

经固溶处理的A1-Cu—Mg合金在常应变率拉伸实验中具有显著的锯齿形屈服现象，且屈服行为随固溶处理温度的改变而呈现不同的特征。塑性变形特性与合金材料的微细观结构，尤其是位错运动的演化密切相关。本文运用透射电子显微镜，研究在不同温度下固溶处理的Al—Cu—Mg合金的微观结构，尤其是析出颗粒的大小和含量。并结合宏观的拉伸实验结果，分析Al—Cu—Mg合金动态应变时效的机制。     

碳包覆铁纳米颗粒的气相爆轰合成北大核心CSCD

以粉末状与气态二茂铁为原料,以氢气和氧气混合气体为爆轰能源,采用气相爆轰法进行了合成碳包覆铁纳米颗粒实验。XRD和TEM实验结果表明,采用两种不同状态的二茂铁,均得到了纳米碳包覆铁颗粒。该包覆颗粒的组成核为铁或铁碳化合物,外层壳主要由石墨碳组成,大部分球形纳米颗粒尺寸分布于5-30 nm之间。通过对比发现,采用气态二茂铁爆轰时,所得到的碳包铁粒度分布较为集中,壳层厚度比较均匀,且粒子具有较好的球形状。最后结合铁碳合金相图,从热处理角度对气相爆轰合成碳包覆铁纳米颗粒的机理进行了分析,得出产物中α-Fe与Fe_3C的形成过程。分析了碳包覆铁纳米颗粒的磁滞回线,其表现出硬磁性与顺磁性双重性质。     

湍流液环柱塞流动的"双边界层"模型

本文应用Spalding的精确内层律,构造了湍流液环柱塞流动的"双边界层"模型,提高了进行该流动摩阻计算的精度....     

PARTICLE PROPERTIES—PROMISE AND NEGLECT

We see two major trends in Particle Technology. First, the focus is shifted from unit operations towards functional products, i.e. towards product engineering. Second, modeling will become more and more important. Processes cannot yet be designed from basic molecular understanding. Nanotechnology, however, begins to bridge this gap between molecules and particles and may thus open new ways not only for the production and handling of particulate matter but also for the engineered design of advanced material properties. Starting from the concept of product engineering we investigate the basic preconditions for tailoring nanoparticulate properties, i.e. the control of the particle interactions. Nanotechnology can only be transferred to industrial production if the interactions are effectively controlled. Material and particle properties are essential for predictive models. Although strong tools like MD, DEM or population balance models are available, these models are only predictive if realistic material and particle properties are available which is often not the case. We show for selected examples how particle properties can be obtained by studying the physically relevant elementary processes. The impact breakage behavior of many different materials is described by a master curve. Particle adhesion can be modeled if the roughness of particle and substrate and the Hamaker constant are known. The latter is obtained from adsorption studies.     

翼型与风洞侧壁交接角区分离流动研究

运用Navier-Stokes数值模拟对翼型模型试验时风洞侧壁和翼型模型结合部拐角区黏型分离流动进行模拟,并将简单代数湍流模型扩展用于机翼/风洞侧壁拐角区流动.计算格式在空间上采用中心有限体积离散,在时间上采用多步Runge-Kutta时间步长格式进行积分.结果显示,在翼型模型风洞试验时,模型/侧壁拐角区、模型表面、侧壁表面和模型后形成复杂的黏性分离流动和二次分离,对实验结果产生很大的影响.     

低浓度固液两相流的颗粒相动理学模型

用广义Fokker-Planck扩散模型描述液相湍动对颗粒的挟带作用，用修正的BGK模型描述粒间碰撞效应，建立了封闭的颗粒相PDF输运方程．运用Chapman-Enskog迭代法求得方程的二阶近似解，获得颗粒相脉动速度二阶矩和三阶矩闭合关系．模型与颗粒流模型相容，与液相湍流闭合模型是否相容依赖于扩散模型的具体形式，并据此比较了不同的涡一颗粒作用模型．模型与二维明渠流轻质沙和天然沙试验资料符合很好．表明细小粒径颗粒能够充分跟随水流运动；大粒径颗粒的相间平均速度差和壁面滑移速度明显，近壁区内的颗粒沿流向和垂向脉动强度都可能大于水流，并存在一定程度的颗粒碰撞效应．