一种模拟动边界绕流的锐利界面浸入边界法

When the structural wall moves over a fixed grid, the structure coverage will change, resulting in many dead and emerging elements. To avoid the influence of malformation and reconstruction of body-fitted grids on the calculation efficiency and accuracy of the fluid-structure interaction problems with coupled boundary movement on the fixed grid, an improved numerical method for describing the interaction between an immersed rigid body and fluid based on a sharp-interface is proposed. In this method, both the fluid and solid are regarded as pure fluid domains in the whole computational domain, and the solid boundary is divided into several Lagrangian grid points. The flow parameter or velocity is reconstructed by interpolation at the interface element, which is then directly used as the boundary condition of the flow field, thus reflecting the influence of the wall boundary conditions. The method constructs the calculation structure of “virtual point, force point and vertical foot point”, and the velocity of the virtual point is obtained by bilinear interpolation. Then, the velocity of the force point is calculated by forcing the solid boundary to meet the no-slip condition, and the equations of the coupling system based on the immersion boundary method are finally solved to realize the numerical simulation of the flow with a complex moving boundary. The numerical program for this immersed boundary method is established using C++, then the accuracy and reliability of the proposed method are validated by comparison with the literature and experimental results of the basic numerical example of flow around a cylinder. Furthermore, the effects of the structural shape and the angle of attack on the trailing vortex structure, the vortex shedding frequency, and the lift/ coefficient characteristics of the flow around the elliptical cylinder have been analyzed. The anti-symmetric S-type, “P+S” Ⅰ-type and “P+S” Ⅱ-type trailing vortex shedding modes, as well as the variation laws of the vortex structure size, vortex shedding frequency and lift-drag coefficients ratio with axis ratio and angle of attack, are captured. The critical angle of attack (25°) corresponding to the maximum lift-drag ratio is determined as 25°.     

带有反射腔的双频相对论返波管的粒子模拟

 设计了一种带有反射腔的能在X波段实现稳定双频输出的圆柱结构相对论返波管,采用2.5维相对论全电磁PIC粒子模拟软件行粒子模拟研究。仿真结果表明:在输入电压433 kV、引导磁场2.2 T的条件下,实现了9.53,10.09 GHz的双频稳定输出,平均输出功率340 MW,平均功率效率24.1%。     

壁面对串列双圆柱尾迹影响的实验研究

为研究壁面对近壁等直径串列双圆柱尾迹特性的影响,用PIV和压力传感器测量尾迹湍流的涡结构及频谱.实验在循环水槽内进行,基于圆柱直径D的雷诺数为1696,壁面边界层厚度为6.6D.影响尾迹流场结构的两个重要的特征参数是T/D和G/D(T为两圆柱中心间的距离,G为圆柱下表面与壁面间的距离),文中主要考察G/D的影响.实验中...     

双层加筋圆柱壳在不同舷间连接形式下的声辐射性能分析

论文用解析法推导得出了双层加筋圆柱壳的两种舷间连接形式-实肋板和托板的反力表达式,其中实肋板的振动形式分别采用三种振动方程近似表示-考虑板的面内面外振动、仅考虑板的面内振动、仅考虑板的面内准纵波振动,托板的振动形式也分别采用三种振动方程近似表示-考虑板的面内振动、仅考虑板的面内准纵波振动、近似成杆的纵向振动,数值分析对...     

一维固-固结构圆柱声子晶体中弹性波的传输特性

利用一维固-固结构圆柱声子晶体中弹性波横向受限的条件,推导出弹性波在其中各个模式满足的关系式,利用它研究了弹性波各模式的特性.并利用转移矩阵研究了弹性波的传输特性随模式量子数和圆柱半径的变化规律.得出了一些一维固-固结构圆柱声子晶体的新特征,即弹性波的传输特性由模式量子数和圆柱半径决定. 关键词： 圆柱声子晶体 弹性波 受限 模式     

大功率发动机控制器壳体温度场仿真分析

摘要：大功率元件过热是控制器ECU失效的重要原因，本文分析了在自然对流散热情况下，元器件布置位置对控制器温度场的影响。对ECU壳体进行数值建模，并运用ANSYS Icepak软件对控制器密封外壳温度场进行了仿真模拟计算。其结果表明：（1）元器件集中放置将会导致密封外壳整体温度较高，且不利于散热，这会使ECU在工作过程中因温度过高而损坏元器件；（2）将功率元器件分散放置靠近外壳的部位，温度场分布均匀，且高温范围小，散热效果较好。通过分析主要功率元器件放置位置对控制器ECU温度场的影响，为PCB板优化布置提供了设计依据，同时也会提高ECU的可靠性、增加ECU的使用寿命。     

对一道能量类连接体问题的深入探讨

笔者在教学中遇到这样一道题目,该题也常见于其他参考资料,其似是而非的解答,对教师和学生都有不良影响.笔者将其整理如下.【原题】如图1所示,质量为2m和m的可看作质点的小球A和B,用不计质量、不可伸长的细线相连,跨在固定光滑圆柱两侧,圆柱截面圆半径为R.     

DYNAMIC CHARACTERISTICS IN INCOMPRESSIBLE HYPERELASTIC CYLINDRICAL MEMBRANES

In this paper, the dynamic characteristics are examined for a cylindrical membrane composed of a transversely isotropic incompressible hyperelastic material under an applied uniform radial constant pressure at its inner surface. A second-order nonlinear ordinary differential equation that approximately describes the radial oscillation of the inner surface of the membrane with respect to time is obtained. Some interesting conclusions are proposed for different materials, such as the neo-Hookean material, the Mooney-Rivlin material and the Rivlin-Saunders material. Firstly, the bifurcation conditions depending on the material parameters and the pressure loads are determined. Secondly, the conditions of periodic motion are presented in detail for membranes composed of different materials. Meanwhile, numerical simulations are also provided.     

平面应变不可压缩橡胶圆柱的大变形

针对一类新的橡胶材料应变能函数，推导了受内压作用下不可压缩橡胶圆柱的大变形公式，给出了位移、应力的解析表达式（用积分形式表示）。建立了适用于分析非线性不可压缩橡胶材料的罚有限元列式，算例表明：位移与应力能很好地与理论解吻合，并提出了控制计算稳定的方法，特别是详细地讨论罚因子的选取及对计算结果的影响。